OWNER'S MANUAL Colour Television Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. P/No. : MFL53455535-EN(MC059D,1010-REV00) www.lg.
Safety Precautions WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS IN SIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Cleaning bottom are provided for ventilation, and to insure Unplug this television receiver from the wall outlet reliable operation of the television receiver, and to before cleaning.
Description of controls 9. MTS/ BUTTON (some models) To listen to the MTS sound. 10. MUTE BUTTON To mute the sound. Again to restore the muted sound. 11. TV/VIDEO BUTTON To select TV, VIDEO or COMPONENT mode. 12. CAPTION BUTTON (some models) To select the CAPTION mode. Refer to "Closed caption function". 13. SLEEP BUTTON To set the desired sleep time. 14. MEMORY/ERASE BUTTON (some models) To memorize or erase the desired channel. 15. REVIEW BUTTON (some models) To return to the previous channel. 16.
Connection of external equipment (some models) You can connect additional equipment, such as VCRs, camcorders etc. to your set. Here shown may be somewhat different from your set. These are an example drawing of typical jack layout. IN JACKS (some models) :Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these inputs. Press the TV/VIDEO button to select VIDEO or VIDEO 1. IN VIDEO AUDIO Note:This TV is programmed to remember which mode it was last set to, even if you turn the TV off.
Basic TV operation Before operating your TV, make sure the following instructions have been completed. • Your TV has been connected to an antenna or a cable system. • Your TV has been plugged in a power outlet. • In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an example to help you with the TV operation. select the desired channel with the D / E buttons. Using the A.PROG button You can conveniently perform AUTO PROGRAM using the AUTOPRG.
Various function This feature can be used to prevent unauthorized viewing. Setting the Clock Before setting the on/off timer, first you should set the current time. Notes : • With the key lock on, the display Key lock appears on the screen if any button on the front panel is pressed while viewing the TV. •This programmed to remember which option it was last set to even if you switch the TV from standby mode.
Picture control Auto Picture Control Adjusting the Picture This is the function to manually adjust the desired picture levels (Contrast, Brightness, Color, Sharpness, Tint) of the screen as you like. If the picture you set is not satisfactory, you can select a factory preset picture. In the broadcasting system PAL-M/N, the picture item Tint is not displayed. You can select picture modes programmed at factory as you prefer. Using the APC button 1. Press the APC button. 2.
Troubleshooting check list SYMPTOMS No power No picture or sound Poor picture but good sound Poor reception Lines in picture Ghosts (multiple images) Remote control does not work. Cannot tune desired channel. CHECK THESE THINGS Is power cord plugged in? Is television turned on? Check batteries in remote control. Try another channel (station trouble). Check antenna connectings. Check for local interference. Adjust the antenna. Adjust the picture control. Program channel using AUTO PROGRAM.