Colour Television OWNER'S MANUAL Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this inforrequire service.
Contents Installation 3 Location and function of controls Remote control handset Battery installation / Front panel 4 Basic 7 operation Programme selection Volume adjustment / Quick view On and off / Mute function On On screen language selection (option) 8 screen menus Menu selection TV stations Auto programme tuning Manual programme tuning 9 Setting up edit Favourite programme Calling the programme table Programme Picture adjustment PSM (Picture Status Memory) CSM (Colour Status Memory) P
Installation Power This set ed on operates the label on on an AC mains the back In the event of thunderstorms ial and mains supply, the voltage is as indicatapply DC power to the set. powercuts, please pull out the aer- cover. or Never plugs. Warning To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not place anything containing liquid on top fire or could give an electric shock.
Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be panel of the set. adjusted with the buttons on the front Remote control handset Before you use the remote control teries. See the next page. 1. POWER MUTE POWER switches the set handset, please install the bat- from standby or off to NUMBER BUTTONS switches the set on from standby or directly on standby. 1 123 2. select a number. 456 2 3.
Location and function of controls 10. MUTE switches the sound on or off. 11. TV/AV selects TV or AV mode. switches the set 12. I/II/ * from on standby. (option) selects the language during dual selects the sound output. language broadcast. (option) 13. LIST POWER displays MUTE the programme table. 10 1 2 3 4 5 6 7 8 9 MENU/INDEX 0 TV/AV 14. SLEEP sets the 15. SSM/ * sleep timer. (Sound Status Memory) (option) preferred sound setting. recalls your 16.
Location and function of controls Front panel Shown is a simplified representation of front or side panel. Here shown may be somewhat different from your set.
Basic operation On and off 1. 2. Press the main power button to switch the set on. If the set is in standby mode, press the POWER, D / E TV/AV or NUMBER buttons on the remote control handset to switch it , on fully. 3. Press the POWER button on the remote control handset. The set reverts to standby mode. 4. Press the main power button to switch the set off.
On screen menus The an dialogue operator also between you and your set takes place on screen with The buttons required for the operating steps are menu. displayed. Menu selection 1. 2. 3. 4. Press the MENU button and then D / E button to display each menu. Press the G button and then D / E button to select a menu item. Press the G button to display the sub menu or the pull-down menu.
Setting up TV stations Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you programmed. Stations can be tuned using automatic or manual modes. Note : In some models up to 200 TV stations Auto programme can O O be stored. tuning OiO O All stations that can be received are stored by this method.
Setting up Auto programme scan To automatically scan the pictures of stored programmes, press the D ( D D )or E ( E ) button for about 3 seconds. The picture of stored programmes appears on the screen one by one. O O OiO TV stations E To stop auto programme buttons. scanning, Manual programme tuning press any button except VCR O Manual programme lets you manually tune and arrange the stations in whatever order you desire.
TV stations Setting up Assigning 1. Repeat a station name 2. the 'Manual programme tuning' steps 1 to 3. Press the D / E button to select Name. 3. Press the G button O O 4. on the Name pull-down Press the D button. You can use a blank, +, to 9 and the alphabet A to Z. 5. With the E button you can select in the opposite direction. Select the position by pressing the F / G button and then take your choice of the second character, and so on. 6. Press the OK button. 7. Repeatedly viewing.
Setting up { { { { AutoOprog. Manual Prog.Oedit Favourite ( ) O}i{OOKOMENU Programme TV stations edit This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. 1. Press the MENU button and then D / E button to select the Station menu. 2. Press the G button and then D / E button to select Prog. edit. Press the G button to display the Prog. edit menu. 3.
Setting up TV stations Favourite programme O O This function lets you select your favourite programmes directly. 1. Press the MENU button to select the Station 2. Press the G button and then D / E button to select Favourite. 3. Press the G button to display the Favourite menu. OiO O menu. O 00 O Favourite { OiOOO 4. Press the D / E button to select 5. desired programme with the F / G button. To store another programme, repeat steps 4 to 5. 6. Select -- -----. a You 7. 8.
Setting up Calling TV stations the programme table You can check the programmes stored in the memory the programme table. by displaying Displaying programme table Press the LIST button to display the Programme table menu. The programme table appears on the screen. One programme table contains ten programmes as below. OOOOCO1DOOOO5OOSO69 O1OOCO03OOOO6OOSO17 O2OOCO12OOOO7OOSO22 O3OOSO66OOOO8OOCO09 O4OOSO67OOOO9OOCO11 ( ) O}i{OOKOMENU Note : a. You may find some blue programmes.
Picture Note: Picture PSM menu options Status (Picture are adjustment not available for RGB input source. TurboOPic. CSM Contrast Press the MENU button and then D / E button to select the Picture menu. Press the G button to select PSM. Press the G button and then D / E button to select a picture setting on the PSM pull-down menu. 1. 2. 3. PSM { TurboOPic. { CSM Contrast Brightness C olour Sharpness ( ) Press the OK 4. 5. Repeatedly viewing.
Picture adjustment Eye (option) Eye is an optional function. Only a set with eye option can perform this function. In set will automatically adjust the picture accordsurrounding conditions. This will enable you to enjoy the suitable picture according to the surroundings. some ing models, the to the most Press the EYE/ * button to switch the eye function on or off.
Sound adjustment (option) Sound adjustment is an optional function only adjustment can perform this function. SSM (Sound Status Memory) You can Speech 1. 2. 3. a set with sound SSM TurboOSnd. AVL Balance Woofer Treble Bass X-WAVE select your preferred sound setting; Flat, Music, Movie or and you can also adjust the sound frequency of equalizer. Press the MENU button and then D / E button to select the Sound menu. Press the G button to select SSM.
Sound SSM TurboOSnd. AVL Balance Woofer Treble Bass X-WAVE ( ) { { { { { { { { X-WAVE You 1. 2. 3. O}i{OOKOMENU adjustment (option) can (Wireless Sound) (option) also listen to the sound SSM TurboOSnd. AVL Balance Woofer Treble Bass X-WAVE ( ) 4. 2. 3. MENU 4. the FM receiver. { { { { { { { { Off 87.7 87.9 88.1 88.3 88.5 88.7 88.9 Off 106.7 106.9 107.1 107.3 107.5 107.7 107.9 or O}i{OOKOMENU Match the TV's Some models 1.
Sound adjustment (option) Sound output selection (option) In AV mode, you can select output sound for the left and right loud- speakers. press the I/II/ * button to select the sound output. Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loud- Repeatedly L+R : L+L : R+R : speaker. Audio signal from audio L input is sent to left and right loudspeakers. Audio signal from audio R input is sent to left and right loud-speakers.
Time Setting the o 1. o o 2. 3. OiO Setting clock Press the MENU button and then D / E button to select the Time menu. Press the G button to select Clock. Press the G button and then D / E button to adjust the hour. io oi O o o o OiO 4. 5. 6. O Press the G button and then D / E button to adjust the minute. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. Setting the On/Off timer this function, the set automatically switches on or off at a preset time.
Other functions TV and AV modes Inputs be set for TV can cassette recorder AV mode. AV mode is used when or (VCR), or other equipment a Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the 'Connection of external equipment' section. 1. Press the MENU button and then D / E Special 2. 3. o video o is connected to the set. OiO O button to select the menu.
Other functions Child lock o The TV o can be set so control it. This feature that the remote control handset is needed to can be used to prevent unauthorized view- ing. OiO 1. O Press the MENU button and then D / E Special button to select the menu. 3. Press the G button and then D / E button to select Child lock. Press the G button and then D / E button to select On or Off on the Child lock pull-down menu. 4. Press the OK 5. Repeatedly viewing. 2. or F button.
Other functions Games Game is an optional function, only a set with game by using the remote control handset. function 1. (option) Press the MENU button and then D / E Special 2. 3. 4. can perform o this o button to select the OiO menu. O Press the G button and then D / E button to select Game. Press the G button to enter the game mode. Press the D / E button to select a game and then press the OK button. You can enjoy the game Note : a.
Connection of external You connect additional can equipment equipment, such as VCRs, camcorders etc. to your set. Here shown may be somewhat different from your set. ANT IN Y LL PB PR DVD INPUT (480i) COMPONENT OUT AV VIDEO (L/MONO) AUDIO (R) IN Aerial socket 1. VCR 2. 3. 4. ANT IN LL Y PB 5. PR DVD INPUT COMPONENT Connect the RF out socket of the VCR to the aerial socket on the back of the set. Connect the aerial cable to the RF aerial in socket of the VCR.
Connection of external S-video / Audio in sockets When connecting equipment (S-AV) (option) the S-video socket of the VCR to the S-VIDEO socket of the set, the picture quality will be further improved. ANT IN OUT 75Ω VIDEO (L) AUDIO -(R) - IN 1. Connect the S-video socket of the VCR to the S-VIDEO socket 2. of the set. Connect the audio cable from the VCR to the AUDIO sockets of VCR the set. 3. 4. Select AV3 by pressing the TV/AV button Press the PLAY button on the VCR.
MEMO
Troubleshooting check list Symptoms No picture, no Sound sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in Poor picture reception on some channels No colour Poor colour Remote control does not work Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched Try on another channel (weak signal) Check aerial (plugged into Check aerial (broken lead?) TV?) Check aerial Check for local interference Adjust