Owner's Manual

Memorizing the Channels by MANUAL
PROGRAM
Using the MEMORY/ERASE button
You can conveniently perform MANUAL PROGRAM using the
MEMORY / ERASE button on the remote control.
1. Press the
D
/
E
or NUMBER buttons to select the channel number
you want to memorize or erase.
2. Press the MEMORY/ERASE button to select
Memory or Erase.
The on screen display appears as shown right.
Using the MENU
1. Press the MENU button and then
D
/
E
button the until the menu is
displayed as shown right.
2. Press the
G
and then use
D
/
E
button to select Manual.
3. Press the
G
button and then use
D
/
E
button to select Channel.
4. Press the
G
button and then use
D
/
E
button to select the channel
number you want to memorize or erase.
5. Press the
F
button and then use
D
/
E
button to select Memory.
6. Press the
G
button and then
D
/
E
to select On or Off.
7. Repeatedly press the MENU button to exit.
Selecting the Channel
Press the
D
/
E
button to conveniently select the upper or lower
channel then the channel being viewed, or NUMBER buttons to
directly select the desired channel.
Adjusting the Volume
Press the
G
button to increase the volume level or
F
button to
decrease the volume level.
To mute the sound, Press the MUTE button.
The word
Mute is displayed.
It's convenient when you get the telephone calls.
To restore the muted sound, press the MUTE button again or VOL
F
/
G
button.
9
++CATV+95+Memory
CH.
Move++Next+{+Back}
Auto+prog. {
Manual {
Favorite++ {
Move++Next+{+Back}
Channel {
Memory {
Fine {
+ Memory {
++On
++Off
oVolume 15
+++++++
EEMute
To +set
Manual {