Colour Television OWNER’S MANUAL Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
Installation Power This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. Press the POWER button on the front panel or side panel to turn off the TV when the TV set is not being used for a long time.It is recommended to remove the plug from the wall outlet(Power point). Disconnecting device from mains Mains plug is the disconnecting device.
Location and function of controls Remote control handset Before you use the remote control handset, please install the batteries. 1 7 10 scans programmes automatically. F / G (Volume Up/Down) adjusts the volume. adjusts menu settings. OK accepts your selection or displays the current mode. 5. SLEEP sets the sleep timer. (option) switches the eye function on or off. 6. EYE/ 2 3 8 4 * 7. MUTE switches the sound on or off. 8. TV/AV selects TV or AV mode. switches the set on from standby.
Basic operation On and off On screen language selection(option) 1. Press the main power button to switch the set on. 2. If the set is in standby mode, press the POWER, D / E, TV/AV or NUMBER buttons on the remote control handset to switch it on fully. 3. Press the POWER button on the remote control handset. The set reverts to standby mode. 4. Press the main power button again to switch the set off.
On screen menus The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the operating steps are also displayed. Menu selection Setting up TV stations Auto programme tuning All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. Auto programme 1. Press the MENU button and then D / E button to display each menu. 2.
Picture adjustment Note: Picture menu options are not available for the RGB input source. PSM (Picture Status Memory) The picture Dynamic, Standard, Mild and Game are programmed for good picture reproduction at the factory and cannot be changed. Picture adjustment You can adjust picture Contrast ,Brightness , Colour ,Sharpness and Tint (NTSC input only) to the levels you prefer. XD You can enjoy the vivid and hi-definition picture with LG’s excellent Digital Reality processor technology.
Troubleshooting check list Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in picture Poor reception on some channels No colour Poor colour Remote control does not work Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched on Try another channel (weak signal) Check aerial (plugged into TV?) Check aerial (broken lead?) Check aerial Check for local interference Adjust contrast Adjust brightness Adj