Specifications

ManualsBrandsLG ManualsComputer equipmentNotebook Computers

FAQ

265

3 HDMI port transfers both video and audio simultaneously. Hence, there is no need for a separate

audio connection.

4 On the PC, press [Fn] + [F7] to display monitor (projector) toggling screen. Select the desired

screen output.

TIP

• Everytime [ ] + [P] keys are pressed, the screen output option changes. Release the

keys to display the selected screen output.

CAUTION

• If you do not set Speaker as the default value after disconnecting the HDMI cable, the

system may not produce any sound.

• If a program was running already, you must exit and restart the program to produce sound.

ENGLISH

Summary of content (14 pages)

PAGE 1
FAQ 265 3 HDMI port transfers both video and audio simultaneously. Hence, there is no need for a separate audio connection. ENGLISH 4 On the PC, press [Fn] + [F7] to display monitor (projector) toggling screen. Select the desired screen output. TIP • Everytime [ ] + [P] keys are pressed, the screen output option changes. Release the keys to display the selected screen output.
PAGE 2
66 FAQ Using a Wired/Wireless Router ENGLISH A wireless / regular router connects several PCs and mobile devices to one internet line and enables the use of internet and the network. A wireless / regular router has to be bought separately. Refer to the manual provided by the manufacturer for instructions. Connecting a Wireless or Regular Router If one internet line is used with a wired / wireless router and several devices are connected, this may result in a slower connection.
PAGE 3
FAQ 267 Wireless LAN OPTION Wireless LAN is optional. Hence, it may not be installed in some models. Turning On/Off Airplane Mode Prior to using the wireless LAN, press [Fn] + [F6] to turn off Airplane Mode. Pressing [Fn] + [F6] keys will turn on or off the Airplane Mode. If you are not going to use the product for a while, keep the Airplane Mode turned on to reduce the battery power consumption.
PAGE 4
268 FAQ 1 Press the Action Center [ ] icon on the right side of the taskbar.
PAGE 5
FAQ 269 2 Press the [Network] tile to search for a nearby Access Point. ENGLISH TIP If Wi-Fi is turned off, press the [Wi-Fi] tile.
PAGE 6
270 FAQ ENGLISH 3 Select the Access Point you want to connect to and press [Connect].
PAGE 7
FAQ 271 4 If a connection is established, [Connected] appears below the Access Point name. ENGLISH 5 Click the Web Browser icon to check whether the Internet is operating normally.
PAGE 8
272 FAQ Wired LAN ENGLISH LAN is the network environment that users can connect to by using a cable to connect to their internet providers or the company's network. Using Wired LAN LAN is installed with an automatic IP (DHCP) as default value. Please refer to the following instructions for details on setting up an automatic IP (DHCP) or manual IP. 1 Connect the LAN adapter to the USB-C™ port on the PC. TIP The recommended network cable for the optimal network environment is CAT5 or higher.
PAGE 9
FAQ 273 2 Connect the wired LAN cable to the LAN port.
PAGE 10
274 FAQ 3 Press the [ ] button and select the [Settings] menu. ENGLISH TIP Press the [ ] key or [Ctrl] + [Esc] to display the Start menu.
PAGE 11
FAQ 275 4 Select [Network & Internet] > [Status] > [Change adapter options].
PAGE 12
276 FAQ 5 Right-click [Ethernet] and select the [Properties] menu.
PAGE 13
FAQ 277 6 Select [Internet Protocol Version 4 (TCP/IPv4)] and then click [Properties].
PAGE 14
278 FAQ 7 To use an automatic IP(DHCP), select [Obtain an IP address automatically]. If you wish to use a ENGLISH static IP, select [Use the following IP address] to enter the address. Contact the network service provider or administrator to use a static IP. 8 Press [OK] to complete the network setup. 9 Click the Web Browser icon to check whether the Internet is operating normally.