LCD TV OWNER’S MANUAL MODELS: 15LS1R * 20LS1R * Internet Home Page : http://www.lge.com http://ar.lge.com Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
Safety Instructions Safety Instructions WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS IN SIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Cleaning Unplug this television receiver from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Contents Contents Safety Instructions . . . . . . . . . . . . . . . . . . . . .2 Introduction Controls . . . . . . . . . . . . . . . . . . . . . . .4 Connection Options . . . . . . . . . . . . . . .5 Remote Control Key Functions . . . . . .6 Installation Accessories . . . . . . . . . . . . . . . . . . . .7 Kensington Security System . . . . . . . .7 Installation Instruction . . . . . . . . . . . . . .8 External Equipment Connections . . . . .11 Antenna Connection . . . . . . . . . . . . .11 VCR Setup . .
Introduction Introduction Controls /I INPUT MENU ENTER VOL On/Off Button CH Channel Buttons Input Button Menu Button Volume Buttons Enter Button R Remote Control Sensor Power/Standby Indicator Glows red in Standby mode, Glows green when the TV is turned on.
Introduction Connection Options ANTENNA INPUT PC SOUND PC INPUT JACK INPUT 15LS1R* RGB(PC/DTV) IN ANTENNA IN COMPONENT (DTV/DVD IN) AUDIO AUDIO (RGB) IN AC INPUT VIDEO S-VIDEO H/P VIDEO IN AC INPUT COMPONENT (DTV/DVD IN) ((480i/480p), Audio) 20LS1R* S-VIDEO HEADPHONE JACK AUDIO/VIDEO INPUT INPUT FOR SERVICE JACK SERVICE ONLY ANTENNA INPUT ANTENNA IN COMPONENT (DTV/DVD IN) AUDIO AC INPUT VIDEO S-VIDEO H/P VIDEO IN AC INPUT COMPONENT (DTV/DVD IN) ((480i/480p), Audio) AUDIO/VIDEO INPUT S-V
Introduction Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the TV. MUTE Switches the sound on or off. TV Returns to the TV mode. FAV (Refer to p.17) EXIT INPUT Selects the remote operating mode. (Refer to p.24) POWER MTS (Refer to p.20) MENU ENTER CH D / E (Channel button) NUMBER buttons VOL F / G (Volume button) DASP (Refer to p.19) APC (Refer to p.18) CAPTION (Refer to p.23) SLEEP (Refer to p.
Installation Installation Accessories Owner’s Manual Remote Control AAA Batteries Power Cord Cable management Kensington Security System - The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. - For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact http://www.kensington.
Installation Installation Instruction Stand Installation 1. Assemble parts of stand body with cover base of the stand. Insert stand body into a cover base until clicking sound. 2. Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 3. Place the product stand on the product as shown. Note: Here shown may be somewhat different from your set. stand body cover base Detaching stand 1. 2. 3. 4. 5.
Installation Connection of TV 1. Connect the aerial cable to the socket marked ANTENNA IN on the back. For the best reception an outdoor aerial should be used. 2. To connect an additional equipment, see the Connection of external equipment section. 3. Connect the power cord. ( ) Note: Here shown may be somewhat different from your set. Basic connection 1. Connect the cables as necessary. After connecting the cables neatly,arrange the cables to the Cable Holder.
Installation Installation Instruction Continued Wall Mount: Horizontal installation 4 inches 4 inches 4 inches 4 inches R R 4 inches For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
Installation External Equipment Connections Antenna Connection - For optimum picture quality, adjust antenna direction. Connecting to an Inside Antenna Setup - Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below. (Use the correct type of antenna cable for the type of wall antenna jack.) Turn clockwise to tighten.
Installation External Equipment Connections Continued VCR Setup - In Video mode, TV automatically reverts to TV mode if the TV buttons are pressed. RGB(PC/DTV) IN ANTENNA IN COMPONENT (DTV/DVD IN) AUDIO AUDIO (RGB) IN Connection 1 Set VCR switch to 3 or 4 and then tune TV to the same channel number. Connection 2 1. Connect the audio/video output jacks on VCR to the corresponding input jacks on the TV.
Installation External A/V Source Setup Connections Connect the audio/video output jacks on the external A/V equipment to the corresponding input jacks on the TV. When connecting the TV to external A/V equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). RGB(PC/DTV) IN ANTENNA IN COMPONENT (DTV/DVD IN) AUDIO AUDIO (RGB) IN VIDEO H/P S-VIDEO VIDEO IN Camcorder Viewing Setup 1. Turn on the external A/V equipment. 2.
Installation RGB(PC/DTV) IN DTV Setup ANTENNA IN COMPONENT (DTV/DVD IN) AUDIO AUDIO (RGB) IN - To watch digitally broadcast programs, purchase and connect a digital set-top box. VIDEO S-VIDEO H/P VIDEO IN Connections Connect the digital set-top box video outputs to the COMPONENT (Y, PB, PR) jacks and connect the digital set-top box audio outputs to the AUDIO jacks.
Operation Operation TV Operation Overview 1. First, make all equipment connections. Plug the AC Adapter into the TV, then plug the AC Adapter into a power outlet. At this time, the TV is switched to standby mode. • In standby mode, press the POWER, TV, CH (D,E), INPUT or number button on the remote control or ON/OFF, CH (D,E), INPUT button located on the TV to turn the TV on. 2. Select the viewing source by pressing INPUT.
Operation Channel Menu Options Memorizing the Channels with Auto Program - For Auto program to work, the programming source must be connected to the TV and the TV must be receiving programming signals either over-the-air or from a cable-type service provider. 1. Press the MENU button and then use D the CHANNEL menu. 2. Press the G button and then use Auto Program. button to select /E CHANNEL D /E button to select Auto Program Manual program Favorite channel To start 3.
Operation Favorite Channels Setup - Favorite Channel lets you quickly tune in up to 8 channels of your choice without having to wait for the TV to scan through all the in-between channels. CHANNEL Auto Program Manual program Favorite channel D F G Á E Favourite channel --------- To set D E MENU 1. Press the MENU button and then use D /E --------------------------------- FG Á MENU button to select the CHANNEL menu. 2. Press the G button and then use D /E button to select Favorite channel. 3.
Operation Picture Menu Options APC (Auto Picture Control) - This function adjusts the TV for the best picture appearance. 1. Press the APC button repeatedly to select the picture appearance setup option as shown below. Clear Optimum Soft User • You can also adjust APC in the PICTURE menu. • Clear, Optimum and Soft are preset for good picture quality at the factory and cannot be changed. ACC (Auto Color Control) - Selecting a factory setting colour set. 1.
Operation Sound Menu Options DASP(Digital Audio Sound Processing) - This function lets you enjoy the best sound without any special adjustment because the TV selects the appropriate sound option based on the program content. 1. Use the DASP button to select the appropriate sound setup as shown below. Flat Music Movie Sports User • You can also adjust DASP in the SOUND menu. Equalizer Adjustments SOUND DASP AVL Balance Flat Music Movie Sports User G 0.1 Khz D F G Á E 0.3 D E FG Á MENU 1.
Operation Sound Menu Options continued Sound Balance 1. Press the MENU button and then use D /E button to select the SOUND menu. 2. Press the Balance. G button and then use D / E button to select 3. Press the G button and then use F / G button to adjust the sound balance. • Balance is adjustable from Left 50 to Right 50. 4. Press the ENTER button to save.
Operation T imer Menu Options Clock Setup - If the time on the clock is incorrect, reset the clock manually. 1. Press the MENU button and then use D the TIMER menu. /E button to select 2. Press the Clock. G button and then use D /E button to select 3. Press the hour. G button and then use D /E button to set the 4. Press the G button and then use minutes. 5. Press the ENTER button to save.
Operation T imer Menu Options continued Sleep Timer Setup - The Sleep Timer turns the TV off at a preset time. 1. Press the SLEEP button repeatedly to select the number of minutes. First the ‘ --- Min.’ option appears on the screen, followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes. 2. When the number of minutes you want is displayed on the screen, press the ENTER button. The timer begins to count down from the number of minutes selected. 3.
Operation Special Menu Options Closed Captions Closed captioning is a process which converts the audio portion of a television program into written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs. 1. Poor reception conditions are encountered: • IGNITION: Picture may flutter, drift, suffer from black spots, or horizontal streaking.
Operation Special Menu Options continued Select Mode - Inputs can be set for TV, Video or RGB-PC mode. Video mode is used when a video cassette recorder (VCR), or other equipment is connected to the set. 1. Press the MENU button and then D / E button to select the SPECIAL menu. 2. Press the G button and then D / E button to select Input. 3. Press the G button and then D / E button to select TV, Video, Component, RGB-DTV or RGB-PC. • Video: VCR connected to the VIDEO IN socket of the set.
Operation Screen Menu Options (15LS1R * only) - After setup, be sure to select RGB-PC source to see the PC image on TV screen. SCREEN Auto configure Manual configure Reset To set D H-Position 85 F G E D FG Á E MENU 1. Press the MENU button and then use D / E button to select the SCREEN menu. 2. Press the G button and then use D / E button to select desired item. 3. Use the F / G button to make appropriate adjustments. • H-position/V-position Adjusts picture left/right and up/down.
Maintenance & Product Specifications Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent.
Troubleshooting Checklist Troubleshooting Checklist The operation does not work normally. • Check to see if there is any object between the product and the remote control causing obstruction. The remote control • Are batteries installed with correct polarity (+ to +, - to -)? doesn’t work • Correct remote operating mode set: TV, VCR etc.? • Install new batteries. Power is suddenly turned off • Is the sleep timer set? • Check the power control settings.
The audio function does not work. Picture OK & No sound • Press the VOL (or Volume) button. • Sound muted? Press MUTE button. • Try another channel. The problem may be with the broadcast. • Are the audio cables installed properly? No output from one of the speakers • Adjust Balance in menu option. Unusual sound from inside the product • A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
