ENGLISH LCD TV OWNER’S MANUAL LCD TV MODELS 19LS4R* 22LS4R* 17LS5R* 20LS5R* Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
ACCESSORIES Owner's Manual ACCESSORIES Ensure that the following accessories are included with your TV. If any accessory is missing, please contact the dealer where you purchased the product. or Owner’s manual Owner’s Manual Power Cord Batteries Remote Control Cable Management *Slightly wipe stained spot on the exterior only with the cleansing cloths for the product exterior if there is stain or fingerprint on surface of the exterior.
CONTENTS A C C E S S O R I E S ......................................................1 CONTENTS PREPARATION PICTURE CONTROL PICTURE CONTROL Front Panel Controls....................................................... 4 Back Panel Information .................................................. 6 Stand Installation............................................................. 9 Detaching stand ..............................................................10 Back Cover for Wire Arrangement ....................
Clock Setup......................................................................57 Auto On/Off Timer Setting .........................................58 Sleep Timer Setting........................................................59 Auto Shut-off Setting ....................................................60 CONTENTS TIME SETTING TELETEXT Switch On/Off ...............................................................61 SIMPLE Text .....................................................................
PREPARATION FRONT PANEL CONTROLS ■ ■ This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth.
POWER INPUT Button Button /I INPUT MENU Button MENU OK Button OK VOLUME Buttons VOL PREPARATION 19LS4R*/ 22LS4R* PROGRAMME Buttons PR Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on.
PREPARATION BACK PANEL INFORMATION ■ This is a simplified representation of the back panel. Here shown may be somewhat different from your TV. 17LS5R* PREPARATION 1 2 3 RGB(PC/DTV) IN ANTENNA IN AUDIO (RGB) IN VIDEO S-VIDEO AV 1 AV IN 2 4 6 1 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. 2 RGB/Audio Input Connect the monitor output from a PC/DTV to the appropriate input port.
PREPARATION 2 1 3 20LS5R SERVICE ONLY ANTENNA IN AV 1 VIDEO S-VIDEO H/P AV IN 2 4 5 8 20LS5RC 2 RS-232C (SERVICE ONLY) 3 SERVICE ONLY ANTENNA IN VIDEO S-VIDEO AV 1 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. 2 SERVICE ONLY 3 Antenna Input Connect over-the-air signals to this jack.
PREPARATION BACK PANEL INFORMATION 19LS4R* / 22LS4R* PREPARATION 2 3 1 HDMI/DVI IN 4 AUDIO (RGB/DVI) IN RGB (PC/DTV) IN ANTENNA IN VIDEO L AUDIO R S-VIDEO H/P AV 1 AV IN 2 Y PB PR L R VIDEO AUDIO COMPONENT IN 5 1 2 3 4 8 6 7 8 9 5 Euro Scart Socket (AV1) Connect scart socket input or output from an external device to these jacks. 6 HDMI/DVI IN Input Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable.
STAND INSTALLATION ■ Here shown may be somewhat different from your TV. 19/22LS4R* 1 Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 17/20LS5R* Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Assemble parts of stand body with the product of the stand. Insert stand body into the product until clicking sound.
PREPARATION DETACHING STAND ■ Here shown may be somewhat different from your TV. Place the set with its front facing downward on a cushion or soft cloth. 2 Pull cover base backward during pressing botton on stand body. 3 Hold cover base and pull with shake it backward to separate from stand body. 4 Hold the stand and bend it upward. 5 Pull stand body to separate from set during pressing 2 latches.
BACK COVER FOR WIRE ARRANGEMENT ■ Here shown may be somewhat different from your TV. 1 Connect the cables as necessary. 2 PREPARATION To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section. Install the C A B L E M A N A G E M E N T as shown. How to remove the cable management First, press the cable management. Hold the C A B L E M A N A G E M E N T with both hands and pull it upward.
PREPARATION WALL MOUNT: HORIZONTAL INSTALLATION For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. PREPARATION 4 inches 4 inches 4 inches 4 inches 4 inches DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4inches on each side from the wall.
POSITIONING YOUR DISPLAY ■ Here shown may be somewhat different from your TV. Adjust the position of the panel in various ways for maximum comfort. • Tilt range 8~12 19/22LS4R* 0 3 12~10 0 3 PREPARATION 17/20LS5R* LOCATION Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is placed in a position to allow a free flow of air.
PREPARATION KENSINGTON SECURITY SYSTEM PREPARATION - The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. - For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact h t t p : / / w w w . k e n s i n g t o n . c o m, the internet homepage of the Kensington company.
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ Here shown may be somewhat different from your TV. HD RECEIVER SETUP When connecting with a component cable (Only 19/22LS4R*) 1 Connect the SET TOP outputs to the C O M P O N E N T I N V I D E O sockets (Y PB PR) on the set. EXTERNAL EQUIPMENT SETUP 2 Connect the audio cable from the SET TOP to C O M P ON E N T I N A U D I O sockets of the set.
When connecting with a HDMI(Only 19/22LS4R*) HDMI/DVI IN 2 Select HDMI/DVI (DTV) input source with using the I N P U T button on the remote control. 1 EXTERNAL EQUIPMENT SETUP 1 Connect the HDMI output of the digital set-top box to the H D M I / D V I I N jack on the set.
EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting with a component cable (Only 19/22LS4R*) 1 Connect the video output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y or Y PB PR) of the DVD to the C O M P O N E N T I N V I D E O sockets (Y PB PR) of the set. Y PB PR L R VIDEO AUDIO COMPONENT IN EXTERNAL EQUIPMENT SETUP 2 Connect the audio cable from the DVD to C O M P O N E N T I N A U D I O sockets of the set. 3 Press the I N P U T button to select Component (480i/576i/480p/576p/720p/1080i).
When connecting with a Euro Scart 1 Connect the Euro scart socket of the DVD to the Euro scart socket of the set. 2 Press the I N P U T button to select AV1. AV 1 3 Press the P L A Y button on the DVD. The DVD playback picture appears on the screen. ! NOTE G Please use the shield scart cable. AUDIO/ VIDEO (R) AUDIO (L) EXTERNAL EQUIPMENT SETUP 1 When connecting HDMI cable(Only 19/22LS4R*) 1 2 Connect the HDMI output of the DVD to the H D M I / D V I I N jack on the set.
EXTERNAL EQUIPMENT SETUP VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. ■ When connecting with an antenna EXTERNAL EQUIPMENT SETUP 20 ANTENNA IN ANT OUT S-VIDEO ANT IN OUTPUT SWITCH VIDEO L 1 2 Wall Jack Antenna 1 Connect the RF out socket of the VCR to the aerial socket of the set.
When connecting with a Euro Scart 1 Connect the Euro scart socket of the VCR to the Euro scart socket of the set. AV 1 2 1 Otherwise press the I N P U T button on the remote control handset to select AV 1. The VCR play back picture appears on the screen. You can also record programmes received by the TV on video tape. AUDIO/ VIDEO (R) AUDIO (L) EXTERNAL EQUIPMENT SETUP Press the P L A Y button on the VCR.
EXTERNAL EQUIPMENT SETUP VCR SETUP When connecting with a RCA cable EXTERNAL EQUIPMENT SETUP 1 Connect the audio/video out sockets of the VCR to AUDIO/VIDEO in sockets of the set. 2 Press the INPUT button to select AV2. 3 Press the PLAY button on the VCR. The VCR playback picture appears on the screen. VIDEO S-VIDEO AV IN 2 1 S-VIDEO L VIDEO R ANT IN ! NOTE OUTPUT SWITCH G ANT OUT If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack of the set.
HEADPHONE SETUP When connecting with a Headphone cable 1 Insert the headphone plug to the headphone socket of the set. You can listen to the sound through the headphone. To adjust the head-phone volume, press the F / G button. If you press the MUTE button, the sound from the headphone is switched off.
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub 15 pin cable 17LS5R* EXTERNAL EQUIPMENT SETUP 1 Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the PC input socket of the set. 2 Connect the audio cable from the PC to the A U D I O ( R G B ) I N sock-ets of the set. 3 Press the INPUT button to select RGB (PC).
When connecting with a HDMI to DVI cable(Only 19/22LS4R*) Connect the DVI output of the PC to the H D M I / D V I I N jack on the set. 2 Connect the audio cable from the PC to the A U D I O ( R G B / D V I ) I N sockets of the set. HDMI/DVI IN AUDIO (RGB/DVI) IN 2 1 3 Select HDMI/DVI (PC) input source with using the I N P U T button on the remote control. DVI-PC OUTPUT EXTERNAL EQUIPMENT SETUP 1 AUDIO ! NOTE If the set is cold, there may be a small “flicker” when the set is switched on.
EXTERNAL EQUIPMENT SETUP Supported Display Resolution <17LS5R*> RGB-PC mode RGB-DTV mode EXTERNAL EQUIPMENT SETUP Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x480 31.469 59.94 720x480p 31.47 31.50 59.94 60.00 800x600 37.879 60.31 720x576p 31.25 50.00 1024x768 48.363 60.00 1280x1024 63.981 60.02 1280x720p 37.50 44.96 45.00 50.00 59.94 60.
SCREEN SETUP FOR PC MODE PC Setup (RGB [PC] mode only) (only 17LS5R*/19LS4R*/22LS4R*) You can adjust auto configure, manual configure and reset as you prefer. EXTERNAL EQUIPMENT SETUP Auto configure This function is for the automatic adjustment of the screen position, clock, and phase. The displayed image will unstable for a few seconds while the auto configuration is in progress. Manual configure This function is for the manual adjustment of the screen position, clock and phase.
WATCHING TV / PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. 1 1 POWER Switches the set on from standby or off to standby. TV Returns to the TV viewing from any mode. Switches the set on from standby. INPUT If you press the button once, the input source OSD will appear on screen as shown. Press the D / E button and then OK button to select the desired input source.
7 I/II Selects the sound output. 1 4 8 ARC Select your desired picture format. 7 * 2 9 No function MENU Selects a menu. SLEEP Sets the sleep timer. 6 / 9 8 5 Installing Batteries ■ Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). ■ Install two 1.5V AAA batteries. Don’t mix old or used batteries with new ones. ■ Close cover.
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV If your TV will be turned on, you will be able to use its features. 1 WATCHING TV / PROGRAMME CONTROL 30 First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , I N P U T, P R D / E button on the TV or press the P O W E R, T V, I N P U T, P R D / E, N u m b e r ( 0~9 9 ) button on the remote control and then the TV will switch on.
ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 Press the M E N U button and then D / E button to display each menu. 2 Press the G button and then D / E button to select a menu item. 3 Change the setting of an item in the sub or pull-down menu with F / G button. You can move to the higher level menu by pressing the O K or M E N U button.
WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the PR D / E or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
MANUAL PROGRAMME TUNING Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. 1 Press the M E N U button and then D / Station menu. 2 Press the G button and then D / 3 Press the 4 Select the desired programme number (0 to 99) with the F / G button or NUMBER buttons on the Storage menu. Any number 0 5’ for 5. under 10 is entered with a numeric ‘0’ in front of it, i.e.
WATCHING TV / PROGRAMME CONTROL FINE TUNING Normally fine tuning is only necessary if reception is poor. The finely tuned programme will be indicated by orange numberduring programme selection. Station WATCHING TV / PROGRAMME CONTROL 1 Press the M E N U button and then D / Station menu. 2 Press the G button and then D / programme. E Auto programme Manual programme Programme edit Favourite programme E button to select the DE button to select Manual FG OK MENU 1 Station 3 Press the G button.
ASSIGNING A STATION NAME You can assign a station name with five characters to each programme number. Press the M E N U button and then D / Station menu. 2 Press the G button and then D / programme. E Station E button to select the Auto programme Manual programme Programme edit Favourite programme button to select Manual DE FG OK MENU 1 3 4 Press the G button and then D / Name. E button to select Press the G button and then D / E button.
WATCHING TV / PROGRAMME CONTROL PROGRAMME EDIT This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. 1 Press the M E N U button and then D / E button to select the Station menu. 2 Press the G button and then D / Programme edit. 3 Press the G button to display the Programme edit menu. E button to select Deleting a programme 1.
FAVOURITE PROGRAMME This function lets you select your favourite programmes directly. Repeatedly press the YELLOW button to select stored favourite programmes while it is selected On. Repeatedly press the Y E L L O W button to select previous programmes while it is selected Off. 1 3 Press the G button and then D / E button to select the E button to select Favourite Programme.
WATCHING TV / PROGRAMME CONTROL CALLING THE PROGRAMME TABLE You can check the programmes stored in the memory by displaying the programme table. A Displaying programme table Press the L I S T button to display the Programme table menu. The programme table appears on the screen. One programme table contains ten programmes as shown. WATCHING TV / PROGRAMME CONTROL ! NOTE a. You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit mode. b.
CHILD LOCK The TV can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. 1 Press the M E N U button and then D / the Special menu. 2 Press the G button and then D / lock. E 3 Press the G button and then D / Off. E E button to select DE button to select Child FG OK MENU 1 Special button to select On or Repeatedly press the M E N U button to return to normal TV viewing.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO)CONTROL(ONLY 19/22LS4R*) You can watch the screen in various picture formats; S p e c t a c l e , O r i g i n a l , 4 : 3 , 16:9, 14:9, Zoom1, Zoom2. You can adjust the enlarge proportion using D / E button. This function works in the following signal. 1 Repeatedly press the A R C button to select your desired picture format. You can also adjust A R C in the Screen menu.
• 14:9 You can enjoy the picture format of 14:9 or general TV programme through the 14:9 mode. The screen 14:9 is viewed just like that the screen 4:3 is magnified to the left / right. 14:9 DE Zoom2 DE DE PICTURE CONTROL • Zoom1 Following selection will lead you to view the picture without any alternation, while filling the entire screen. However, the top and bottom portions of the picture will be cropped.
PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode-Preset Dynamic Standard Mild Game User PICTURE CONTROL 1 Select this option to display with a sharp image. The most general and natural screen display status. Select this option to display with a mild image. Select this option to display with a game image. Select this option to use the user-defined setting. Press the M E N U button and then D / the Picture menu.
Auto Color Tone Control (Warm/Normal/Cool) Selecting a factory setting colour set. Press the M E N U button and then D / the Picture menu. 2 Press the G button and then D / E E button to select PICTURE CONTROL 1 Picture button to select CSM. PSM CSM Cinema Reset 3 4 Press the G button and then D / E button to select a color setting on the CSM menu: Cool, Normal, Warm or User. Repeatedly press the M E N U button to return to normal TV viewing.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode-User option Contrast Brightness Colour Sharpness Tint 1 Adjusts the difference between the light and dark levels in the picture. Increases or decreases amount of white in the your picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Adjusts the balance between red and green levels.
Color Tone - User option Selecting a factory setting colour set. 1 Press the M E N U button and then D / the Picture menu. E button to select Picture 2 Press the G button and then D / E button to select CSM. 3 Press the G button and then D / E button to select User. PICTURE CONTROL PSM CSM Cinema Reset DE FG OK MENU 1 Picture 4 5 Press the G button and then D / Green or Blue. Press the F / G E button to select Red, button to make appropriate adjustments.
PICTURE CONTROL - PICTURE IMPROVEMENT TECHNOLOGY(ONLY 19/22LS4R*) XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. It’s not available to use this function in RGB-PC mode. This feature is not available for all models. PICTURE CONTROL 1 Press the MENU button and then D / the Picture menu. 2 Press the G button and then D / E button to select XD. 3 Press the G button and then D / Auto or Manual.
DEMO(ONLY 19/22LS4R*) Use it to see the difference between XD Demo on and XD Demo off. It’s not available to use this function in RGB[PC], HDMI[PC] mode. Special Press the MENU button and then D / the Special menu. 2 Press the G button and then D / E button to select E button to select XD DE Demo. FG OK MENU 1 3 4 Press the G button to begin XD Demo. Special To stop X D D e m o, press the M E N U button.
PICTURE CONTROL CINEMA (ONLY 19/22LS4R*) Set up the TV for the best picture appearance for viewing movies. This feature is not available for all models. 1 Press the M E N U button and then D / E button to select Picture PSM CSM XD Cinema Reset the Picture menu. PICTURE CONTROL 2 Press the G button and then D / E button to select Cinema. DE FG OK MENU 1 3 Press the G button and then D / E button to select On or Off.
PICTURE RESET Returns to the default settings PSM, CSM, XD, Cinema at the factory. Picture 1 E button to select DE 2 Press the G button and then D / Reset. 3 Press the G button to initialize the adjusted value. E FG OK MENU button to select 1 Picture PICTURE CONTROL Press the M E N U button and then D / the Picture menu. PSM CSM XD Cinema Reset PSM CSM XD Cinema Reset 4 Repeatedly press the M E N U button to return to normal TV viewing.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER Auto Volume automatically keeps on an equal volume level even if you change programmes. Sound 1 SOUND & LANGUAGE CONTROL 50 2 Press the M E N U button and then D / the Sound menu. Press the G button and then D / E E button to select SSM AVL Balance button to select AVL. DE FG 0 OK MENU 1 3 Press the G button and then D / Off.
PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; Flat, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer. F l a t , M u s i c, M o v i e, and S p o r t s are preset for good sound quality at the factory and are not adjustable. Flat Music Movie Sports User The most commanding and natural audio. Select this option to enjoy the original sound when lis tening to the music. Select this option to enjoy sublime sound.
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT -USER MODE Adjust the sound equalizer. 1 Press the M E N U button and then D / the Sound menu. 2 Press the G button and then D / E E button to select- button to select SSM. Sound 3 4 Press the G button and then D / E SSM AVL Balance button to select User. 0 Press the G button. DE FG OK MENU SOUND & LANGUAGE CONTROL 1 5 Select a sound band by pressing the F / G button. Make appropriate sound level with the D / E button.
BALANCE You can adjust the sound balance of speaker to the levels you prefer. 1 Press the M E N U button and then D / the Sound menu. E button to selectSound SSM AVL Balance 2 Press the G button and then D / E 0 button to select Balance. DE FG OK MENU 3 Press the G button and then F / desired adjustment. G button to make Sound SSM AVL Balance 4 R15G Repeatedly press the M E N U button to return to normal TV viewing.
SOUND & LANGUAGE CONTROL I/II Stereo/Dual Reception When a programme is selected, the sound information for the station appears after the programme number and station name disappear. SOUND & LANGUAGE CONTROL 54 Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I / I I button twice. In mono reception, the depth of sound is improved.
NICAM Reception If the set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button repeatedly. When N I C A M m o n o is received, you can select N I C A M M O N O or F M M O N O. 2 When N I C A M stereo is received, you can select N I C A M S T E R E O or F M M O N O.
SOUND & LANGUAGE CONTROL ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION Installation guide menu appears on TV screen when it is turned on for the first time. 1 Press the D / E / F / G button and then, O K button to select your desired language. 2 Press the country. D / E / F / G button and then, O K button to select your * If you want to change Language/ Country selection SOUND & LANGUAGE CONTROL 1 Press the M E N U button and then use D / menu.
TIME SETTING CLOCK SETUP You must set the time correctly before using on/off time function. In the event of power interruption (disconnection or power failure), the clock must be reset. 1 2 Press the M E N U button and then D / the Time menu. Press the G button and then D / E E button to select Time Clock Off time On time Auto sleep button to select Clock. DE FG OK MENU 1 3 Press the G button and then hour. D / E button to set the Time Press the G button and then D / utes.
TIME SETTING AUTO ON/OFF TIMER SETTING The Off time automatically switches the set to standby at the preset time. Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. Once the on time/off time is set, these functions operate daily at the preset time. Off time function overrides On timer function if they are set both to the same time. The set must be in standby mode for the On timer to work.
SLEEP TIMER SETTING You don’t have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time has elapsed. 1 Press the S L E E P button repeatedly to select the number of minutes. The display ‘ - - - ’ will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240. 2 When the number of minutes you want is displayed on the screen, the timer begins to count down from the number of minutes selected.
TIME SETTING AUTO SHUT-OFF SETTING If you select On on the Auto sleep menu, the set will automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting. 1 2 Press the M E N U button and then D / the Time menu. Press the G button and then D / Sleep. E E button to select Time Clock Off time On time Auto sleep button to select Auto DE FG OK MENU 11 3 TIME SETTING 4 Press the G button and then D / or Off.
TELETEXT This feature is not available in all countries. Teletext (or TOP text) is an optional function, therefore only a set with the teletext system can receive the teletext broadcast. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems.
TELETEXT TOP TEXT The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. A Block / group / page selection 1 4 With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group.
SPECIAL TELETEXT FUNCTIONS ? A REVEAL Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display. A SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. A UPDATE Displays the TV picture on the screen while waiting for the new teletext page.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. ■ Are batteries installed with correct polarity (+ to +, - to -)? ■ Correct remote operating mode set: TV, VCR etc.? ■ Install new batteries. ■ The remote control doesn’t work Power is suddenly turned off Is the sleep timer set? ■ Check the power control settings. Power interrupted ■ No broadcast on station tuned with Auto off activated.
The audio function does not work. Press the V O L ( o r V o l u m e ) button. ■ Sound muted? Press M U T E button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the product ■ Adjust Balance in menu option.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS MODELS Dimensions 17LS5R* 20LS5R* 19LS4R* 22LS4R* 17LS5R-ZA 20LS5R-ZA 20LS5RC-ZA 19LS4R-ZA 22LS4R-ZA with stand 394.5 x 394.0x 169.4 mm 15.5 x 15.5 x 6.7 inches 474.1 x 464.6 x 184.3 mm 18.7 x 18.3 x 7.3 inches 456.8x 396.6x 172.0mm 18.0x 15.6 x 6.8 inches 525.4 x 441.7x 187.4 mm 20.7x 17.4 x 7.3 inches without stand 394.5 x 352.0 x 66.0 mm 15.5 x 13.9 x 2.6 inches 474.1x 419.5 x 72.8 mm 18.7 x 16.5x 2.9 inches 456.8 x 368.5 x 70.5mm 18.0x 14.5 x 2.8 inches 525.
