User's Manual
Table Of Contents
- Introduction / Important Safety Precautions
- Using Windows 10
- Using the PC
- Using an AC Adapter and a Battery
- Operation Status Lamps
- Keyboard
- Keyboard Backlight
- Adjusting Screen Brightness and Volume
- Hearing Protection Feature
- Using the Touchpad
- Setting Touchpad
- Connecting to External Display
- Connecting to Wireless Display
- Connecting an External USB-C™ (Thunderbolt™) Device
- Using USB-C™ (Thunderbolt™) Charging Function
- Bluetooth
- Wired LAN
- Wireless LAN
- Using a Wired/Wireless Router
- UFS/Micro SD Slot
- Using Software
- Restoring the System
- Setup and Upgrade
- FAQ
128
Using the PC
3 Source
The notebook PC is used to charge the connected device.
TIP
If the connected device is set to Source, the charging function does not work.
TIP
The charging status of the external device being charged is not displayed on the notebook PC.
If you connected a smartphone, you should select "Charge mobile phone" on the smartphone
screen to charge the phone battery.
CAUTION
When you set the charging function for a USB-C™ port in LG Control Center, beware of the
following:
• If you changed the charge setting, it is recommended that you remove the USB-C™ cable
and re-connect it.
• If you restart the system or turn off the power, the charge setting is changed to
[Automatic].
• If the charge setting is set to [Sink], some of the devices connected to the USB-C™ port
may not work properly.
• Always-On Charging only supports the ON (automatic) and OFF options.
• If the power consumption of the notebook PC is larger than the power supply from the
external device, the battery may be consumed gradually.
ENGLISH