User's Manual
Table Of Contents
- Introduction / Important Safety Precautions
- Using Windows 10
- Using the PC
- Using an AC Adapter and a Battery
- Operation Status Lamps
- Keyboard
- Keyboard Backlight
- Adjusting Screen Brightness and Volume
- Hearing Protection Feature
- Using the Touchpad
- Setting Touchpad
- Connecting to External Display
- Connecting to Wireless Display
- Connecting an External USB-C™ (Thunderbolt™) Device
- Using USB-C™ (Thunderbolt™) Charging Function
- Bluetooth
- Wired LAN
- Wireless LAN
- Using a Wired/Wireless Router
- UFS/Micro SD Slot
- Using Software
- Restoring the System
- Setup and Upgrade
- FAQ
Using the PC
95
Operation Status Lamps
1 AC Adapter Lamp
• On: The AC adapter is connected.
• Off: The AC adapter is not connected.
If you try to turn on the system that has entered the Hibernate mode or been turned off
after a low-battery alarm, the system will not be turned on but the lamp will blink three
times. If this is the case, connect the AC adapter and charge the battery sufficiently before
using it.
2 Power lamp (a model with fingerprint recognition system)
• On: The system is on and running by the AC adapter or batter y.
• Off: When the system is turned off or in Hibernate mode
• Blinking: The system is in the standby mode.
3 Power lamp (a model without fingerprint recognition system)
• On: The system is on and running by the AC adapter or batter y.
• Off: When the system is turned off or in Hibernate mode
• Blinking: The system is in the standby mode.
4 Caps Lock Lamp
• On: When the Caps Lock is activated
• Off: When the Caps Lock is deactivated
ENGLISH