LCD TV OWNER'S MANUAL MODELS: 15LC1R * 20LC1R * 23LC1R * Please read Information Manual included together before reading this manual and operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote require service.
Contents 3 Installation Please set it up carefully so the product doesn't fall over 5 6 Location and function of controls Remote control handset Battery installation / Front/ Rear Basic operation On and off / Programme selection Volume adjustment / Quick view Mute function On screen language selection 10 On 11 screen menus Menu selection 12 up TV stations Auto programme tuning Manual programme tuning Assigning a station name Programme edit Favourite programme Calling the programme table Se
Installation Unfolding the stand base 1. Place the set with its front facing downward on a cushion 2. Hold down the release button inside the stand and or soft cloth. strongly pull out the stand with your two hands. Note: Here shown may be somewhat different from your set. The stand won't move if you don't press release button.
Installation Connection of TV 1. Connect the aerial cable to the socket marked +75 Ω on the back. For the best reception an outdoor aerial should be used. 2. To connect an additional equipment, see the Connection of external equipment section. 3. Connect the power cord. Note: Here shown may be somewhat different from your set. () Positioning your display Adjust ? the position of the panel in various ways for maximum comfort.
How to wall join the product assembly to the wall set tumbling protect the set Please set it up carefully Set it up close to the wall so the The instructions shown below is when it is the product so the doesn't fall product over when it is doesn't fall pushed to over. backwards. safer way to set up the product, which is to fix it on the wall so the product doesn't fall over in the forward direction. It will prevent the product from falling forward and hurting people.
Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be panel of the set. operate this Only adjusted with the buttons the remote control handset on supplied the top will set. Remote control handset 10 MUTE POWER 1 11 TV INPUT I/II Before you use the remote control handset, batteries. See the next page. 1. 12 2 LIST MUTE switches the sound 13 2. TV clears the OK VOL menu switches the set PR 3.
Location and function of controls 11. POWER switches the set 12. I/II selects the on from standby language during dual or off to standby. language broadcast. 13. MENU selects a menu. 10 MUTE 14. PSM (Picture Status recalls your preferred Memory) picture setting. POWER 1 11 TV INPUT I/II 12 2 15. TELETEXT BUTTONS These buttons are used for teletext. For further details, see the 'Teletext' section. LIST Q.
Location and function of controls Front Top panel PR VOL OK MENU INPUT /I 7 6 5 432 1 8 1. ON/OFF( 6. /I) switches the set on from standby or 3. a programme or a menu item. switches the set on from standby. INPUT selects the remote 7. REMOTE CONTROL SENSOR switches the set 8. POWER/STANDBY INDICATOR operating mode. on from standby. MENU selects 4. a menu. OK accepts your selection or displays mode. 5. 8 (Programme Down/Up) selects off to standby. 2.
Location and function of controls Rear 23LC1R * only COMPONENT VIDEO COMPONENT (VIDEO / AUDIO Input) L AUDIO R PC SOUND 15/ 23LC1R * PC INPUT JACK PC INPUT ANTENNA INPUT INPUT ANTIN( 75 ) PC SOUND AV1 AC INPUT H/P AV2 AC INPUT EURO SCART AUDIO/VIDEO SOCKET INPUT 20LC1R * FOR SERVICE JACK FOR SERVICE S-VIDEO HEADPHONE S-VIDEO JACK INPUT ANTENNA INPUT ANTIN( 75 ) AV1 AC INPUT H/P AV2 AC INPUT EURO SCART AUDIO/VIDEO SOCKET INPUT S-VIDEO S-VIDEO INPUT HEADPHONE JA
Basic operation On and off Press the 1. switch it 3. Note POWER : If, while the INPUT , TV, INPUT or NUMBER buttons to set is switched on, the mains the set will switch to replaced TV D / E fully. Press the POWER button. The set reverts to Pull out mains plugs to switch the set off. 2. MUTE POWER, on standby or power in the mains power socket. on standby plug mode. is disconnected when the mains plug is I/II Programme selection You a Q.
On screen menus Menu selection Press the MENU button and then D / E button to display each menu. Press the G button and then D / E button to select a menu item. 1. 2. the setting of an item in the sub or pull-down menu with F/G button. You can move to the higher level menu by pressing the OK button and to move to the lower level menu by pressing the MENU button. Note : a. In the TV/AV mode, the SCREEN (20LC1R *) menu is not dis- 3. Change played. b. In the teletext mode, menus are not displayed.
Setting up STATION TV stations Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. Auto programme Manual programme Programme edit Favourite programme Auto programme D E MENU FG tuning All stations that can be received are stored by this method.
Setting up Manual programme TV stations STATION tuning Auto programme Manual programme Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. 1. Press the MENU button and then D / E button to select the STATION menu. 2. Press the G button and then D / E button to select Manual 3. programme.
Setting up Assigning a station name 1. Repeat the 'Manual programme tuning' steps STATION Auto programme Manual programme 2. Programme edit 3. Favourite programme E MENU FG 1 to 2. Press the G button and then D / E button to select Name. Press the G button and then use the D / E You can use a blank, . +, D TV stations -,thenumber0to9andthealphabetAtoZ. + A~Za~z[]0~9?!#- OK []:blank TV MENU PR OK VOL VOL PR 14 4. With the F button you can select in the opposite direction.
Setting up Programme TV stations STATION edit Auto programme This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. 1. Press the MENU button and then D / E button to select the STATION menu. 2. Press the G button and then D / E button to select edit. Programme 3. Press the G button to menu.
Setting up STATION Favourite programme Auto programme This function lets you select your favourite programmes Manual programme Programme edit Favourite programme D E TV stations directly. 1. Press the MENU button and then D / E button to select the STATION menu. 2. Press the G button and then D / E to select Favourite programme. MENU FG OK Favourite programme On D E 3. TV 4. 5. LIST Q.VIEW MENU 6. 7.
Picture PSM adjustment PICTURE (Picture Status Memory) PSM 1. Press the MENU button and then D / E PICTURE menu. 2. Press the G button and then D / E button to select PSM. 3. the PSM on CSM Contrast Press the G button and then D / E button to select ting 4. button to select the a Brightness Colour picture set- Sharpness menu. D Press the OK button. E MENU FG OK PICTURE PSM Dynamic CSM Standard Contrast Mild Brightness Game Colour User Sharpness D MENU FG E 5.
Sound SOUND SSM AVL SSM (Sound Status Memory) You select your preferred sound setting; Flat, Music, Movie or and you can also adjust the sound frequency of the equalizer. can Sports Balance adjustment 1. Press the MENU button and then D / E button to select the SOUND menu. SOUND D E MENU FG OK SSM Flat AVL Music Balance Movie Sports G User D E 2. 3. TV MENU FG OK Press the G button and then D / E button to select SSM.
Sound Stereo/Dual When adjustment reception programme is selected, the sound information for the station appears after the programme number and station name a disappear. Broadcast On Screen Mono MONO Stereo STEREO Dual DUAL I Display I/II Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II button twice again.
TIME Menu Clock TIME Clock You must set the time Off time correctly before using on/off time function. On time Auto 1. sleep Press the MENU button and then D/E TIME 2. D E button to select the menu. Press the G button and then D / E button to select Clock. Time MENU FG OK Clock -i-i:i-i- Off time On time Auto D E sleep MENU FG OK 3. Press the G button and then D/E button to 4. Press the G button and then D/E button to 5. Press the MENU button to adjust the hour.
TIME Menu Auto TIME sleep Clock Off time If you select On on the Auto sleep menu, the set will automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting. 1. Press the MENU button and then D/E TIME 2. 3. button to select the On time Auto D E menu. sleep MENU FG OK Press the G button and then D/E button to select Auto sleep. Press the G button and then D / E button to select On or Off.
Other functions SPECIAL TV, Language Input AV and PC modes be set for TV, AV Child lock Inputs Power indicator video cassette recorder can PC mode. AV mode is used when or (VCR), or other equipment a is connected to the set. D E MENU FG Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the 'Connection of external equipment' section. OK 1. Press the MENU button and then D / E button to select the SPECIAL 2. 3. menu.
Other functions SETUP Child lock Language The TV can be set so Input that the remote control handset is needed to control it. This feature can be used to Child lock prevent unauthorized view- Power indicator ing. 1. Press the MENU button and then D / E button to select the SPECIAL 2. 3. D menu. E MENU FG OK Press the G button and then D / E button to select Child lock. Press the G button and then D / E button to select On or Off on the Child lock menu.
Teletext - This feature is not available in all countries. Teletext is an optional function, therefore only a set with the telereceive the teletext broadcast. Teletext is a free service broadcast by most TV stations which gives up-to-theminute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems.
Teletext Direct page selection Corresponding to the SIMPLE teletext mode, you ber using the NUMBER buttons in TOP mode. can select a page by entering it as a three digit num- FASTEXT The teletext pages are colour coded corresponding coloured button. along the bottom of the selection Press the i button to select the index page. You can select the pages which are colour coded screen and are selected by pressing the Page 1. 2. along the bottom line with the same coloured but- tons.
Connection of external equipment You can connect additional equipment, such etc. to your set. Examples are shown below. (- This as VCRs, camcorders part of Connection of external equipment mainly use tures for the 23LC1R * .) pic- Aerial socket PC INPUT ANTIN(75) PC SOUND 1. H/P S-VIDEO AV2 2. 3. 4. VCR 5. Connect the RF out socket of the VCR to the aerial socket of the set. Connect the aerial cable to the RF aerial in socket of the VCR.
Connection of external Euro scart socket equipment (DVD) PC INPUT 1. 2. 3. Press the PLAY button on the DVD. The DVD playback picture appears on the DVD 1. input sockets screen. DVD (15/23LC1R * ) COMPONENT Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y Y PB PR) of the DVD to the COMPONENT/VIDEO sockets (Y PR) VIDEO of the set. L 2. Connect the audio cable from the DVD to COMPONENT/ AUDIO sockets of the set. 3. Press the INPUT button to select Component.
Connection of PC PC in socket PC INPUT ANTIN( 75 ) Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the PC input socket of the set. Connect the audio cable from the PC to the PC SOUND sockets of the set. Press the INPUT button to select RGB-PC. Switch on the PC, and the PC screen appears on the set. The set can be operated as the PC monitor. 1. H/P S-VIDEO AV2 2. 3. 4.
Connection of PC SCREEN ARC PC Setup (15/23LC1R * ) You can * Auto configure configure Manual Reset 1. D E 2. MENU FG OK * : adjust auto configure, manual configure and reset as you prefer. 23LC1R only 3. Press the INPUT button and then D / E button to select the RGB-PC. Press the MENU button and then D / E button to select the SCREEN menu. Press the G button and then D / E button to select the desired screen function.
Connection of PC Picture format You (23LC1R * only) watch TV in various can picture formats; Full, 16:9, 14:9, Zoom, Spectacle, Original, 4:3. press the ARC button to select your desired Repeatedly picture format. Full When your TV receives the wide screen signal, it will lead you to adjust the picture horizontally or vertically, in a linear proportion, to fill the entire screen fully. (Not available in all countries) 16:9 You can TV MENU 14:9 You can enjoy through the 14:9 mode.
T roubleshooting Checklist Checklist The ? doesn't work Power is suddenly Check to control The remote control does not work operation see if there is any obstruction. object normally. between the product ? Are batteries installed with correct ? Correct remote ? Install new ? Is the sleep ? Check the power control settings. Power interrupted No broadcast on station tuned with Auto off activated.
T roubleshooting Checklist Checklist The audio function does not work. No ? Press the VOL Picture OK & ? Sound muted? Press MUTE button. No sound ? Try ? Are the audio cables installed ? Adjust ? A output from of the one another channel. The Balance in problem may be properly? with the broadcast. option.
