Owner's Manual

29
ENGLISH
You can connect additional equipment, such as VCRs, camcorders
etc. to your set. Examples are shown below.
Aerial socket
1. Connect the RF out socket of the VCR to the aerial socket of
the set.
2. Connect the aerial cable to the RF aerial in socket of the VCR.
3. Store the VCR channel on a desired programme number using
the ‘Manual programme tuning’ section.
4. Select the programme number where the VCR channel is
stored.
5. Press the PLAY button on the VCR.
Euro scart socket (VCR)
1. Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
2. Press the PLAY button on the VCR.
If your VCR outputs an AV switching signal via the Scart lead the
set will auto switch to AV mode on start of playback, but if you
want to keep on watching in TV mode, press the
DD
/
EE
or NUM-
BER buttons.
Otherwise press the INPUT button on the remote control
handset to select AV. The VCR play back picture appears on
the screen.
You can also record programmes received by the TV on video
tape.
Note :
a. Signal type RGB, i.e. the signals red, green and blue can only
be selected for the Euro scart and the AV can be received.
These signals are transmitted, for example, by a pay TV
decoder, game machine or photo CD unit, etc.
b. Please use shielded scart cable.
HDMI
DVI IN
AV
RJ12
AUDIO IN D-S
RGB/DVI
COMPONENT
PC/
COMPO
VCR
HDMI
DVI IN
AV
RJ12
AUDIO IN D-SUB ANTENNA
IN
DC-IN
RGB/DVI
COMPONENT
PC/DVI
COMPONENT
VCR
Connection of external equipment