OWNER'S MANUAL Colour Television Chassis : CW91A/C P/No.
Important Precautions Safety/Installation 3 5 7 8 9 Auto Programme / Search Channel Selection (option) Programme Edit / Deleting a programme / Copying a programme Moving a programme / Skipping a programme 12 PSM (Picture Status Memory) / XDP Demo (option) / CSM (Colour Status Memory) Picture adjustment / Eye (option) / Picture format (ARC) (option) Excellent digital picture selection 14 Sound adjustment / Turbo sound selection (option) / AVL (option) / Balance adjustment/ Equalizer/ Sound frequency adju
Important Precautions This unit has been engineered and manufactured to assure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this TV set, observe the following basic rules for its installation, use and servicing. Keep it in an accessible place for future reference. (TV operating voltage is : 110V ~ 240V AC) Make sure to insert the power plug completely.
Important Precautions Do not place the product where it might be exposed to excessive heat, sunlight, rain or moisture. Do not attempt to open the product. There are dangerous High Voltages inside. Refer to Servicing through Qualified Personnel if the TV is not operating properly. Avoid personal injury / set damage by Installing the product on a flat and stable place that can support the weight of the set and has no risk of dropping the product.
1 MUTE POWER TV/AV 9 10 MUSIC MOVIES NEWS SPORTS 18 EQ/* MM/* ARC 1 2 3 4 5 6 7 8 9 15 17 2 0 3 MENU 4 EYE/* PR 5 VOL OK VOL PR 6 Q-VIEW X-LIST 12 X-SORT TURBO SOUND/* XDP/* 16 PSM 7 13 SLEEP SSM/* 8 19 14 I/II/* 11 All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set. Remote control handset Before you use the remote control handset, please install the batteries.
FRONT PANEL / SIDE PANEL (Option) Shown below is a simplified representation of front or side panel, here shown may be somewhat different from your set. On Off On or Off. Common AV3 8 S VIDEO 7 MENU ON/OFF VIDEO L/MONO AUDIO R 6 1 2 5 OK PR VOL 3 4 9 Dims 29FC8 series On.
On and Off On Off. On On MUTE MUSIC POWER TV/AV MOVIES NEWS EQ/* MM/* SPORTS ARC 1 2 3 4 5 6 7 8 9 0 MENU Q. VIEW EYE/* PR VOL OK VOL Off PR You can cancel it by pressing the MUTE, SOUND/* button. SSM/*, AVL, TURBO Q-VIEW X-SORT TURBO SOUND/* Display XDP/* (Option) PSM SLEEP I/II/* Special Language. Press X-LIST button to select desired language.
MUTE MUSIC POWER TV/AV MOVIES NEWS EQ* EQ/* MM/* SPORTS ARC 1 2 3 4 5 6 7 8 9 0 MENU Note : a. In the teletext mode, menus are not displayed. b. In some models Degauss will not display. c. In AV mode, Blueback, Signal will not display.
200 199 100 Station Storage from Colour system Sound system Auto programme Search Fine Programme edit Channel Auto programme 1 Auto BG To start To start V-UHF 34 OK MENU 1. Press the MENU button. 2. 3. Storage from. MUTE Storage from menu. POWER TV/AV Station Storage from Colour system Sound system Auto programme 1 Auto BG To start MUSIC MOVIES NEWS EQ/* MM/* SPORTS ARC Search Fine Programme edit Channel OK MENU To start V-UHF 34 4. Press button to select Auto programme. 5.
Search Search Station menu. Station Storage from Colour system Sound system Auto programme Search Fine Programme edit Channel OK MENU 1 AUTO BG To start To start V-UHF 34 Storage from. 1 MUTE MUSIC POWER TV/AV MOVIES NEWS SPORTS 5. Press button to select Colour system. Press button to select the AUTO, PAL, PAL60, NTSC, NTSC4.43, SECAM. Press OK button. Sound system. EQ/* MM/* Press button to select the BG, I, DK, M. BG : (Asia/New Zealand/M.
Programme edit This function enables you to delete or skip or copy or move the stored programmes. Also you can move some stations to other programme numbers. 1. Press the MENU button, Press the button and then to select the Programme edit menu. 2. Press button to go in Programme edit menu.
Picture Dynamic To start Standard 85 60 60 60 0 PSM XDP Demo CSM Contrast Brightness Colour Sharpness Tint PSM (Picture Status Memory) 1. Press the MENU button and then button to select the Picture MENU. 2. Press button to select PSM, press to select the desired PSM (Standard, Dynamic, Mild, Game, or User). OK MENU Note: PSM status change to user automatically when Contrast, Brightness, Colour and Sharpness set manually.
MUTE MUSIC POWER MOVIES NEWS EQ/* Off. When PSM, XDP keys pressed or any of the picture settings are changed. Normal (4:3) SPORTS ARC 2 3 4 5 6 7 8 9 0 MENU EYE/* PR VOL This picture format is 4 : 3 of general TV. MM/* 1 Picture format (ARC) (option) You can watch TV in various picture formats; Normal, Zoom. Repeatedly press the ARC button to select your desired picture format. TV/AV Zoom (14:9) OK VOL PR You can enjoy the cinema in a vast screen through the Zoom mode.
Sound Flat SSM Turbo Sound AVL Balance Equalizer Off Off 0 Sound adjustment To start You can select your preferred sound setting: Flat, Music, Movie, Sport, User and you can also adjust the sound frequency of Equalizer and Balance. OK MENU If you switch AVL (option) to On, the set automatically keeps on an equal volume level even if you change programmes. MUTE MUSIC 1. Press the MENU button and then button to select the Sound menu. 2.
Turbo Sound selection (option) Sound When this function is On, it will give surround effect as well as loudness will be increased. Repeatedly press the Turbo sound button to switch On or Off. SSM Turbo sound AVL Balance Equalizer Turbo Sound On Turbo Sound Off (Turbo Sound On) (Turbo Sound Off) AVL (Auto Volume Leveler) (option) Balance adjustment You can adjust balance. 1. Press the MENU button and select the Sound menu. 2. Press the button and then button to select Balance menu. 3.
(for AV2) (option) Y MUTE MUSIC POWER TV/AV MOVIES NEWS EQ/* MM/* Note: Sound output selection is not applicable for AV1 & Component mode.
Time Clock Off time On time Time Clock. 00 00 30 On time volume Auto sleep Off Time OK MENU Clock Off time On time 00 00 30 On time volume Auto sleep 01 03 Off MUTE OK MENU MUSIC POWER MOVIES NEWS EQ/* On Off On /Of f Time menu. MM/* SPORTS ARC 1 2 3 4 5 6 7 8 9 Off Time/on Time. TV/AV 0 MENU EYE/* PR Time On time volume -00 00 30 Auto sleep Off Clock Off time On time -01 03 VOL OK VOL PR OK MENU Q-VIEW X-SORT TURBO SOUND/* Press 6. Press 7.
Language: Ref: page No. 7 Special Language English Input Child lock TV Off Degauss Off Blue back Signal Off Off Inputs can be set for TV or AV mode. AV mode is used when a VCR/DVD, or other equipment is connected to the set. a. OK MENU b. In AV mode, Blue back, Signal will not work. MUTE MUSIC Special POWER MOVIES NEWS EQ/* MM/* SPORTS 2 3 4 5 6 7 8 9 0 EYE/* PR VOL OK Component Input Special ARC 1 MENU Input.
Special Language English Input Child lock TV Off Degauss Off Blue back Signal Off Off Special On On On OK MENU Degauss. Degauss Off Blue back sub Special On Off Blue back. Blue back Signal (option) It displays the RF signal strength. Special On Off Signal. Signal Signal Level Description To see signal level on top right corner press OK button from remote. Signal to noise ratio will be displayed in form of red, yellow and green bars. Details are as follows:1. Two red bars - weak signal.
Off Sleep Sleep MUTE POWER TV/AV Sleep MUSIC MOVIES NEWS EQ/* MM/* ARC 1 2 3 4 5 6 7 8 9 0 MENU EYE/* OK VOL PR Q-VIEW X-SORT TURBO SOUND/* PSM SLEEP I/II/* X-SORT You can select the different programmes and add them into different categories (Music, Movies, News, Sports). Press X-SORT button on the remote to switch On/Off the X-Sort function. X-Sort On Sel: News Press the coloured buttons to select the programme to desired category.
VCR/DVD VCR/DVD VCR/DVD VCR/DVD. VCR/DVD Search section. VCR/DVD VCR/DVD. VCR/DVD VCR/DVD VCR/ DVD VCR/DVD VCR/DVD. VCR/DVD VCR/DVD VCR/DVD.
S-VIDEO/ AUDIO in sockets (S-AV) (option) When connecting an S-VIDEO VCR/DVD to S-VIDEO socket, the picture quality will be further improved. S-VIDEO VCR/DVD B VIDEO 1. Connect the S-VIDEO socket of the VCR/DVD to the S-VIDEO socket of the set. 2. Connect the audio cable from the S-VIDEO VCR/DVD to the AUDIO socket of set. 3. Select S-VIDEO by pressing TV/AV button repeatedly. 4. Press the PLAY button on the VCR/DVD. The VCR playback picture appears on the screen.
On On Note: i) Colour patch might appear in your TV set if you rotate or shift the position of the set while it is On or in standby mode. If patch appears in your TV set try the following before calling your service centre or dealer. Place the TV set in desired position and switch it Off by the main power switch. Allow the set to cool down for at least 30 minutes and then switch it On. The degaussing circuit (inbuilt) in your set will remove the patch automatically.
