User’s Guide Specification Yang HM 08.4.28 1. Model Description MODEL SUFFIX 2. 22LG30R-MA LP81K 담 당 BRAND KANG KWANG SUK 08.04.28 LG Part No. Product Name 관 리 자 22LG30R, 22/26/32LF15R MFL41469212 (0904-REV05) Printing Specification 1. Trim Size (Format) : 185mm x 260 mm 2. Printing Colors Cover : 1 COLOR (BLACK) Inside : 1 COLOR (BLACK) 3. Stock (Paper) Cover : Coated paper , S/White 150 g/㎡ Inside : Uncoated paper , 백상지 60 g/㎡ 4. Printing Method : Off set 5. Bindery : Perfect bind 6.
Pagination sheet P/NO.MFL41469212 Total pages : 168 Front cover LG(EN) Blank Page LG 1 P/NO. …. …. …. 81 Rear cover LG(SP) Blank Page 81 1 …. …. ….
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 1 LCD TV OWNER’S MANUAL 22LG30R 22LG30RC 22LF15R 26LF15R 32LF15R Please read this manual carefully before operating your set and retain it for future reference. Write the model number and serial number from the label on the back cabinet on the front or back of this manual. Model: Serial: P/NO : MFL41469212 (0904-REV05) Printed in Korea www.lge.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 2
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 1 WARNING / CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 2 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 1 2 2 6 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 7 Only use attachments/accessories specified by the manufacturer.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 3 11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 4 4 20 Cleaning When cleaning, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzene. 21 Moving Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 5 CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PREPARATION Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Back Panel Information . . . . . . . . . . . . . . . . . . . . . . .
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 6 ■ If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. ■ Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.
MFL41469212-Edit1-en5-mi 4/28/09 1:35 PM Page 7 PREPARATION ACCESSORIES OG ME MO RY/ER ASE 1 4 2 7 MUT VO 5 E PT PU T ION 6 0 9 TV M CH L IN CA 3 8 Q.V IE A. PR OG 4 L 2 7 5 W SL ND RAT EE ME MO RY/ER ASE 1 VO PO W ER TS FA V EN TE R CH MUT P 8 E 0 IN CA PT IO PU T N 3 6 9 PREPARATION Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 8 PREPARATION FRONT PANEL INFORMATION ■ Image shown may differ from your TV. PREPARATION For 22LG30R/C, 22LF15R INPUT MENU ENTER VOLUME CHANNEL Button Button Button (F,G) Buttons (E,D) Buttons INPUT MENU ENTER VOL CH Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 9 PREPARATION For 26/32LF15R CH VOL CHANNEL Buttons VOLUME Buttons ENTER ENTER Button MENU MENU Button INPUT INPUT Button Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on. (Can be adjusted P o w e r I n d i c a t o r in the Option menu.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 10 PREPARATION BACK PANEL INFORMATION ■ Image shown may differ from your TV.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 11 For 26/32LF15R PREPARATION 10 9 HDMI IN 1 SERVICE ONLY IN AV 5 6 VIDEO (MONO) AUDIO AUDIO VIDEO OUT COMPONENT IN VARIABLE AUDIO OUT ANTENNA IN 8 1 HDMI/DVI IN, HDMI IN Digital Connection. Supports HD video and Digital audio. Doesn’t support 480i(For 22LG30R/C)/576i. Accepts DVI video using an adapter or HDMI to DVI cable (not included) (For 22LG30R/C). 2 RGB (PC) IN (For 22LG30R/C) Analog PC Connection.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 12 PREPARATION STAND INSTALLATION ■ Image shown may differ from your TV PREPARATION For 22LG30R/C, 22LF15R 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the S T A N D B O D Y with C O V E R B A S E of the TV. Insert the S T A N D B O D Y into a C O V E R B A S E until clicking sound. STAND BODY COVER BASE 3 12 Assemble the TV as shown.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 13 For 26/32LF15R Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 3 2 Assemble the parts of the S t a n d B o d y with the C o v e r B a s e of the TV. 4 Assemble the TV as shown. PREPARATION 1 Fix the 4 screws securely using the holes in the back of the TV. STAND BODY COVER BASE ! NOTE G When assembling the desk type stand, check whether the screw is fully tightened.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 14 PREPARATION CABLE MANAGEMENT For 22LG30R/C, 22/26/32LF15R ■ Image shown may differ from your TV For 22LG30R/C, 22LF15R PREPARATION 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the CABLE MANAGEMENT CLIP as shown. For 26/32LF15R 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 15 DESKTOP PEDESTAL INSTALLATION ■ Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. PREPARATION 4 inches 4 inches 4 inches CAUTION G G 4 inches Ensure adequate ventilation by following the clearance recommendations. Do not mount near or above any type of heat source. WALL MOUNT: HORIZONTAL INSTALLATION For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 16 PREPARATION PROTECTION COVER ■ Image shown may differ from your TV. For 22LG30R/C, 22LF15R PREPARATION 1 Loose the screws from the TV. 2 Bend the H I N G E B O D Y and pull it backward. HINGE BODY 3 Insert the P R O T E C T I O N C O V E R into the TV. PROTECTION COVER 4 16 Fix the 4 screws securely using the holes in the back of the TV.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 17 After removing the stand, install the included p r o t e c t i o n c o v e r over the hole for the stand. Press the P R O T E C T I O N C O V E R into the TV until you hear it click.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 18 PREPARATION POSITIONING YOUR DISPLAY For 22LG30R/C, 22LF15R ■ Here shown may be somewhat different from your TV. ■ Adjust the position of the panel in various ways for maximum comfort. PREPARATION • Tilt range 12 0 0 3 KENSINGTON SECURITY SYSTEM For 22LG30R/C, 22LF15R - The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 19 ■ To prevent damage do not connect to the power outlet until all connections are made between the devices. ■ Image shown may differ from your TV. ANTENNA OR CABLE CONNECTION PREPARATION 1. Antenna (Analog) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 20 EXTERNAL EQUIPMENT SETUP ■ ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use picture for the 22LG30R/C models. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals with an external digital set-top box.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 21 HDMI Connection AUDIO (RGB/DVI) RGB(PC) IN 1 Connect the digital set-top box to H D M I / D V I I N or HDMI IN(For 22/2 6 / 3 2 L F 1 5 R ) jack on the TV. HDMI/DVI IN AV IN 2 VIDEO No separate audio connection is necessary. HDMI supports both audio and video. RS-232C IN (CONTROL & SERVICE) 2. How to use AUDIO ( MONO) 1 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 22 EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection (Except 22/26/32LF15R) EXTERNAL EQUIPMENT SETUP 1 Connect the DVI output of the digital set-top box to the H D M I / D V I I N jack on the TV. 2 Connect the audio output of the digital set-top box to the A U D I O ( R G B / D V I ) I N jack on the TV. HDMI/DVI IN AV IN VIDEO RS-232C IN CONTROL & SERVICE) S-VIDE AUDIO ( MONO) 2 1 VIDEO AUD COMPONENT IN 2.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 23 DVD SETUP Component Connection 1. How to connect 2 Y Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio outputs of the DVD to the C O MP O N E N T I N A U D I O jacks on the TV. PB PR L R AUDIO (RGB/DVI) IN RGB(PC) IN IN 1 2 ANTEN AV IN VIDEO 2. How to use ■ ■ ■ Turn on the DVD player, insert a DVD.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 24 EXTERNAL EQUIPMENT SETUP S-Video Connection (Except 22/26/32LF15R) AUDIO (RGB/DVI) IN RGB(PC) IN N ANTENNA I 1. How to connect AV IN EXTERNAL EQUIPMENT SETUP 1 VIDEO Connect the S-VIDEO output of the DVD to the S V I D E O input on the TV. H/P ( MONO) VICE) 2 S-VIDEO AUDIO Connect the audio outputs of the DVD to the A U D I O input jacks on the TV. VIDEO AUDIO COMPONENT IN 2. How to use ■ ■ ■ 2 1 Turn on the DVD player, insert a DVD.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 25 VCR SETUP ■ ■ To avoid picture noise (interference), leave an adequate distance between the VCR and TV. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all TVs and is not covered by warranty. N ANTENNA IN S-VIDEO AUDIO IN H/P 1 ANT OUT S-VIDEO ANT IN OUTPUT SWITCH 2 VIDEO L R EXTERNAL EQUIPMENT SETUP Antenna Connection Wall Jack Antenna 1.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 26 EXTERNAL EQUIPMENT SETUP Composite (RCA) Connection ANTENNA IN ANTEN AV IN 1. How to connect EXTERNAL EQUIPMENT SETUP V I D E O jacks between TV and Connect the A U D I O/V VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) 1 AUDIO (RGB/DVI) IN RGB(PC) IN HDMI/DVI IN S-VIDEO AUDIO VIDEO RS-232C IN (CONTROL & SERVICE) H/P ( MONO) VIDEO AUDIO COMPONENT IN 2.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 27 PC SETUP For 22LG30R/C This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection AUDIO (RGB/DVI) IN RGB(PC) IN HDMI/DVI IN ANTE 1. How to connect 1 Connect the VGA output of the PC to the R G B ( P C) I N jack on the TV. 2 Connect the PC audio output to the A U D I O ( R G B / D V I) I N jack on the TV.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 28 EXTERNAL EQUIPMENT SETUP ! NOTES To get the the best picture quality, adjust the PC graphics card to1680x1050. G To enjoy vivid picture and sound, connect the PC to the TV. G Avoid keeping a fixed image on the TV ’s screen for prolonged periods of time.The fixed image may become permanently imprinted on the screen;use a screen saver when possible. G Connect the PC to the RGB (PC) port of the TV; change the resolution output of PC accordingly.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 29 EXTERNAL STEREO SETUP For 26/32LF15R IN 1 VIDEO AV Use to connected either an external amplifier, or add a subwoofer to your surround sound system. L/MONO L/ MONO AUDIO R OUT VARIABLE AUDIO OUT 2 Set up your speakers through your analog stereo amplifier, according to the instructions provided with the amplifier. ! NOTE G When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 30 EXTERNAL EQUIPMENT SETUP AV OUT SETUP For 26/32LF15R The TV has a special signal output capability which allows you to hook up the second TV or monitor. Connect the second TV or monitor to the TV’s AV OUT jacks. 2 See the Operating Manual of the second TV or monitor for further details regarding that device’s input settings.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 31 SCREEN SETUP FOR PC MODE Auto Configure (RGB PC mode only) (Except 22/26/32LF15R) EXTERNAL EQUIPMENT SETUP Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. Auto configure This function is for the automatic adjustment of the screen position, clock, and phase.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 32 EXTERNAL EQUIPMENT SETUP ■ For 22LG30R/C Manual Configure - Adjustment for screen Phase, Clock, Position (RGB PC mode only) If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. EXTERNAL EQUIPMENT SETUP It’s not available to use Phase, Clock function in COMPONENT(480i/480p/576i/576p/720p/1080i/1080p), HDMI (480p/576p/720p/1080i/1080p).
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 33 Initializing (Reset to original factory settings) EXTERNAL EQUIPMENT SETUP This function operates in current mode. To initialize the adjusted value. Picture 1 Press the M E N U button and then use to select the Picture menu. D or E Picture Mode Color Temperature button Advanced Aspect Ratio Picture Reset Screen 2 Press the G button and then use select Screen.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 34 WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. MTS Selects the MTS sound: Mono, Stereo, or SAP. G p.65 A.PROG Searches for available channels. G p.38 (AUTO PROGRAM) WATCHING TV / CHANNEL CONTROL MEMORY/ERASE Memorizes or erases selected channel. G p.39 CAPTION Selects CAPTION mode. G p.64 CHANNEL Select available channels.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 35 POWER Turns your TV or any other programmed equipment on or off, depending on the mode. TV In AV, Component, RGB PC and HDMI/DVI input sources, screen returns to the last TV channel. NUMBER button MUTE Switch the sound on or off. G p.36 FAV Scroll through the programmed Favorite channels. G p.42 WATCHING TV / CHANNEL CONTROL INPUT Select the desired input source: TV, AV, Component, RGB PC and HDMI/DVI.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 36 WATCHING TV /CHANNEL CONTROL TURNING ON TV Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , I N P U T, C H (D or E) button on the TV or press the P O W E R, I N P U T, C H (D or E), N U M B E R( 0~9 9 ) button on the remote control. 1 WATCHING TV / CHANNEL CONTROL ! NOTE G If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 37 ON-SCREEN MENUS SELECTION In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just example to help the TV operation. 1 Press the G button and then use D E F G button to display the available menus.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 38 WATCHING TV /CHANNEL CONTROL CHANNEL SEARCH Auto Tuning: Program Search WATCHING TV / CHANNEL CONTROL Auto Tuning should be used to memorize all the active channels in your area before you are able to use the TV. There are two ways of storing channels in the TV's memory. You can use either. One is called AUTO TUNING and the other is called MANUAL TUNING. In AUTO TUNING mode, the TV will memorize the channels in ascending numerical order.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 39 Manual Tuning: Adding/Deleting Channels You can add or delete channels from the channel scan manually. Use the C H D E or NUMBER buttons to select the channel number you want to add or delete. 2 Press the M E M O R Y / E R A S E button. 3 Press the M E M O R Y / E R A S E button to select M e m o r y or E r a s e. 4 Press the E N T E R button to return to TV viewing.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 40 WATCHING TV /CHANNEL CONTROL FINE TUNING ADJUSTMENT Normally fine tuning is only necessary if reception is poor. WATCHING TV / CHANNEL CONTROL Setup 1 2 Auto Tuning Press the M E N U button and then use D or E button to select the Setup menu. Press the G button and then M a n u a l Tuning. D or E Manual Tuning Favorite Channel button to select DE F G MENU 1 3 4 Press the G button and then D or E button to select F i n e.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 41 BOOSTER If reception is poor select B o o s t e r to On. When the signal is strong, select “OFF”. 1 2 Auto Tuning Press the M E N U button and then D or E button to to select the Setup menu. Press the G button and then use select Manual Tuning. D or E Manual Tuning Favorite Channel button to DE F G MENU 1 3 Press the G button and then use select Booster.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 42 WATCHING TV /CHANNEL CONTROL FAVORITE CHANNELS SETUP This function lets you select your favorite channels directly. Repeatedly press the FAV button to select stored favorite channels. WATCHING TV / CHANNEL CONTROL Setup 1 2 Press the M E N U button and then use to select the Setup menu. D Press the G button and then F a v o r i t e C h a n n e l.
MFL41469212-Edit1-en5-mi 4/28/09 11:26 AM Page 43 KEY LOCK The TV can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. This TV is programmed to remember which option it was last set to even if you turn the TV off. 1 Press the M E N U button and then use to select the Option menu. D or E 2 Press the G button and then use select Key Lock.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 44 PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature allows an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. ■ 22LG30R: Component, RGB PC or HDMI input source use 4:3 or 16:9 aspect ratio. ■ 22/26/32LF15R: Component or HDMI input source use 4:3 or 16:9 aspect ratio.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 45 PRESET PICTURE SETTINGS Picture Mode - Preset Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the P i c t u r e M o d e menu based on the program category. Vivid, Standard, Cinema, Sport, and Game are programmed for optimum picture reproduction at the factory and cannot be changed.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 46 PICTURE CONTROL Auto Color Tone Control (Cool/Medium/Warm) To initialize values (reset to default settings), select the Cool option. Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. PICTURE CONTROL This menu is activated after selecting “User1” or “User2” in the Picture Mode.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 47 MANUAL PICTURE ADJUSTMENT Picture Mode-User Mode Backlight Contrast Brightness Color Sharpness PICTURE CONTROL Tint To control the brightness of the screen, adjust the brightness of LCD panel. Adjusts the difference between light and dark. Increases or decreases the amount of white in the picture. Adjusts intensity of all colors. Adjusts the level of crispness in the edges between the light and dark areas of the picture.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 48 PICTURE CONTROL Color Tone - User Mode To adjust red, green, blue to any color temperature you prefer. When selecting Picture Mode (User1 or User2), you can operate this function. PICTURE CONTROL Picture 1 2 Picture Mode Color Temperature Press the M E N U button and then D or E button to select the P i c t u r e menu. XD Advanced Aspect Ratio Picture Reset Screen Press the G button and then D or E button to select C o l o r T e m p e r a t u r e.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 49 XD - PICTURE IMPROVEMENT TECHNOLOGY XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. It is not possible to use this function in RGB PC mode (For 22LG30R/C). Picture Press the M E N U button and then D or E button to select the P i c t u r e menu.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 50 PICTURE CONTROL ADVANCED - GAMMA High gamma values display whitish images and low gamma values display high contrast images. It is not possible to use this function in RGB PC mode (For 22LG30R/C). PICTURE CONTROL Picture 1 Press the M E N U button and then D Picture Mode Color Temperature or E button to select XD Advanced Aspect Ratio Picture Reset Screen the P i c t u r e menu.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 51 ADVANCED - FILM MODE To set the TV up for the best picture quality for viewing films. This feature operates only in Analog TV, AV, and Component 480i/576i mode. PICTURE CONTROL Picture 1 Press the M E N U button and then D or E button to select the P i c t u r e menu. 2 Press the G button and then D or E button to select A d v a n c e d.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 52 PICTURE CONTROL ADVANCED - BLACK (DARKNESS) LEVEL When you view a film this function adjust the TV to best picture quality. Adjusting the contrast and the brightness of the screen using the black level of the screen. PICTURE CONTROL Picture 1 Press the M E N U button and then D or E button to select the P i c t u r e menu. 2 Press the G button and then D or E button to select A d v a n c e d.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 53 ADVANCED - EYE CARE For 26/32LF15R The Eye Care limits the brightness of the LCD. It reduces the eye dazzling by lowering the backlight voltage to decrease the brightness if the APL(Average Picture Level) is too high. When selecting Picture Mode (Standard, Game, Sport, User1 and User2), you can operate this function.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 54 PICTURE CONTROL PICTURE RESET Returns to the default factory setting for Picture Mode, Color Temperature, XD, Advanced, Aspect Ratio. PICTURE CONTROL Picture 1 2 Picture Mode Color Temperature Press the M E N U button and then D or E button to select the P i c t u r e menu. XD Advanced Aspect Ratio Picture Reset Screen Press the G button and then D or E button to select P i c t u r e R e s e t.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 55 POWER INDICATOR For 26/32LF15R It helps you adjust the brightness of moving LED when power is turned on. PICTURE CONTROL Option 1 Press the M E N U button and then D or E button to select the O p t i o n menu. 2 Press the G button and then D or E button to select P o w e r I n d i c a t o r.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 56 PICTURE CONTROL FACTORY RESET Use to quickly reset all the menu options to their original factory preset values. PICTURE CONTROL Option 1 Press the M E N U button and then D or E button to select the O p t i o n menu. 2 Press the G button and then D or E button to select F a c t o r y R e s e t.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 57 SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume automatically remains on the same level of volume if you change programs. Audio 2 Sound Mode Auto Volume Balance TV Speaker Audio Out Press the M E N U button and then D or E button to select the A u d i o menu. Press the G button and then D or E button to select A u t o V o l u m e. DE F G 0 MENU 1 3 4 Press the G button and then D or E button to select O n or O f f.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 58 SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS - SOUND MODE Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the channel content. S R S T S X T ( F o r 2 6 / 3 2 L F 1 5 R ), C l e a r V o i c e ( F o r 2 6 / 3 2 L F 1 5 R ), S t a n d a r d, M u s i c, C i n e m a, S p o r t and G a m e are preset for optimum sound quality at the factory and are not adjustable.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 59 SOUND SETTING ADJUSTMENT -USER MODE Adjusting the audio equalizer. Audio Press the M E N U button and then D or E button to select the A u d i o menu. 2 Press the G button and then D or E button to select S o u n d M o d e. Sound Mode Auto Volume Balance TV Speaker Audio Out DE F G 0 MENU 1 3 Press the G button and then D or E button to select U s e r. Audio Sound Mode Auto Volume Balance TV Speaker Audio Out 4 Press the G button.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 60 SOUND & LANGUAGE CONTROL BALANCE You can adjust the sound balance of the speakers to the preferred levels. Audio SOUND & LANGUAGE CONTROL 1 Press the M E N U button and then D or E button to select the A u d i o menu. 2 Press the G button and then D or E button to select B a l a n c e. Sound Mode Auto Volume Balance TV Speaker Audio Out DE F G 0 MENU 1 3 Press the G button and then F or G button to make desired adjustment.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 61 TV SPEAKERS ON/OFF SETUP For 26/32LF15R You can adjust the internal speaker status. In TV, AV, COMPONENT, and HDMI mode, internal speaker audio can be operational even though there is no video signal. If you wish to use an external hi-fi system, turn off the TV internal speakers. 1 2 Sound Mode Auto Volume Balance TV Speaker Audio Out Press the G button and then D or E button to select T V S p e a k e r.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 62 SOUND & LANGUAGE CONTROL SELECTING AUDIO OUT For 26/32LF15R Select M o n i t o r O u t or V a r i a b l e O u t to connect the audio outputs. SOUND & LANGUAGE CONTROL Audio 1 2 Press the M E N U button and then use D or E button to select the A u d i o menu. Sound Mode Auto Volume Balance TV Speaker Audio Out 0 Press the G button and then D or E button to select A u d i o O u t.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 63 ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. First select your language. Press the M E N U button and then use D or E button to select the O p t i o n menu. 2 Press the G button and then use 3 Press the G button and then use F or G button to select your desired language. 4 Press the M E N U button to move to the previous menu. D or E button to select L a n g u a g e.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 64 SOUND & LANGUAGE CONTROL CLOSED CAPTIONS Closed captioning is a process which converts the audio portion of a television program into written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs. • IGNITION: Picture may flutter, drift, suffer from black spots, or horizontal streaking.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 65 STEREO/SAP BROADCASTS SETUP The TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program; if the broadcaster transmits one additional sound signal in addition to the original one. Mono: The primary language is heard from left and right speakers. Signal mode is mono. Stereo: The primary language is heard from left and right speakers. Signal mode is stereo.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 66 TIME SETTING CLOCK SETUP You must set the time correctly before using on/off timer function. If current time setting is erased by a power failure or the TV is unplugged, reset the clock. Time TIME SETTING 1 Press the M E N U button and then D or E button to select the T i m e menu. 2 Press the G button and then D or E button to select C l o c k.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 67 AUTO ON/OFF TIME SETTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. Once the on time/off time is set, these functions operate daily at the preset time. The Off time function overrides the On time function if both are set to the same time.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 68 TIME SETTING SLEEP TIMER SETTING The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. 1 TIME SETTING 68 Press the S L E E P button repeatedly to select the number of minutes. First the ‘ - - - ’ option appears on the screen, followed by the following sleep timer options : 10, 20, 30, 60, 90, 120, 180, and 240 minutes.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 69 AUTO SHUT-OFF SETTING If the TV set is switched on and there is no input signal, it will switch off automatically after 10 minutes. Time Press the M E N U button and then D or E button to select the T i m e menu. 2 Press the G button and then D or E button to select A u t o S l e e p. Clock Off Time On Time Sleep Timer Auto Sleep DE F G MENU 1 3 4 Press the G button and then D or E button to select O n or O f f.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 70 APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 71 The audio function does not work. Press the VOL or VOLUME button. Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ ■ Picture OK & No sound No output from one of the speakers ■ Adjust Balance in menu option.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 72 APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 73 PRODUCT SPECIFICATIONS 22LG30R/C, 22LF15R (22LG30R/C-MA, 22LF15R-MA) MODELS Weight 522.2 x 431.5 x 189.2 mm 26.1 x 20.0 x 8.9 inches 31.5 x 23.7 x 8.9 inches 20.5 x 16.9 x 7.4 inches 663.3 x 508.2 x 227.3 mm 801.8 x 604.2 x 227.3mm Excluding stand 522.2 x 384.2 x 69.0 mm 26.1 x 17.7 x 3.1 inches 31.5 x 21.4 x 3.1inches 20.5 x 15.1 x 3.3 inches 663.3 x 449.8 x 80.0 mm 801.8 x 544.1 x 79.0 mm including stand 5.2 kg / 11.4 lbs 9.7 kg / 21.3 lbs 12.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 74 APPENDIX EXTERNAL CONTROL THROUGH RS-232C Except 22/26/32LF15R Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the TV’s functions externally. Connect the serial port of the control device to the RS-232C jack on the TV back panel.RS-232C connection cables are not supplied with the TV.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 75 RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) RXD TXD GND DTR DSR RTS CTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations(Not standard) RXD TXD GND DTR DSR RTS CTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 TXD RXD GND DTR DSR RTS CTS Set ID Option 1 Press the M E N U button and then use D or E button to select the O p t i o n menu.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 76 APPENDIX Command Reference List COMMAND1 COMMAND2 DATA (Hexadecimal) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power k a 00 ~ 01 13. Balance k t 00 ~ 64 02. Aspect Ratio k c (G p.77) 14. Color Temperature k u 00 ~ 03 03. Screen Mute k d 00 ~ 01 15. Red Adjustment k v 00 ~ 50 04. Volume Mute k e 00 ~ 01 16. Green Adjustment k w 00 ~ 50 05. Volume Control k f 00 ~ 64 17. Blue Adjustment k $ 00 ~ 50 06.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 77 0 5 . Volume Control (Command: k f) 0 1 . Power (Command: k a) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Data 01 : Power On To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] Data Min : 00 ~ Max : 64 To show Power On/Off. Refer to ‘Real data mapping 1’ G p .79.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 78 APPENDIX 15. Red Adjustment (Command: k v) 10. Sharpness (Command: k k) To adjust the screen sharpness. To adjust red in color temperature. You can also adjust sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Transmission [k][v][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 50 Data Min: 00 ~ Max: 64 Refer to ‘Real data mapping 2 G p .79. Refer to ‘Real data mapping 1’ G p .79.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 79 19 . Auto Configure (Command: j u) To adjust picture position and minimize image shaking automatically. It works only in RGB PC mode.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 80 APPENDIX Example) 21 . Tune Command (Command: m a) 1.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 81 22. K e y C o d e (Command: m c) 23. Control Backlight (Command : m g) To send IR remote key code. To control the back light. Transmission [m][c][ ][Set ID][ ][Data][Cr] Transmission [m][g][ ][Set ID][ ][Data][Cr] Data: Min : 00 ~ Max : 64 Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] Code Remote control (Hexa) Code Remote control Acknowledgement [g][ ][Set ID][ ][OK][Data][x] Data: Min : 00 ~ Max : 64 (Hexa) TV 44 0B INPUT 1A ENTER Q.
MFL41469212-Edit2-en5-mi 4/28/09 11:27 AM Page 82
MFL41469212-sp-mi 4/28/09 11:28 AM Page 1 TELEVISOR LCD MANUAL DE USUARIO 22LG30R 22LG30RC 22LF15R 26LF15R 32LF15R Por favor, lea detenidamente este manual antes de poner en funcionamiento su televisor. Guárdelo para referencias futuras. Registre el número de modelo y serie de la unidad. Vea la etiqueta pegada en el panel posterior y presente esta información a su distribuidor cuando requiera el servicio. Modelo: Serie: www.lge.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 2
MFL41469212-sp-mi 4/28/09 11:28 AM Page 1 ADVERTENCIA ADVERTENCIA PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR PARA REDUCIR EL RIESGO DE DESCARGA ELECTRICA NO RETIRE LA CUBIERTA NI LA PARTE POSTERIOR DE ESTE APARATO. El símbolo de descarga dentro del triangulo equilátero, señala al usuario la presencia de voltaje peligroso sin aislamiento en el interior del aparato de tal intensidad que podría presentar riesgo de descarga eléctrica.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 2 INSTRUCCIONES IMPORTANTES DE LA SEGURIDAD INSTRUCCIONES IMPORTANTES DE LA SEGURIDAD Lea estas instrucciones. Guarde estas instrucciones. Tenga en cuenta todas las advertencias. Siga todas las instrucciones. 1 2 2 Proteja el cable de alimentación para que no lo pisen ni aplasten, especialmente en las clavijas, las tomas y el punto de salida del aparato. 7 Utilice únicamente acoplamientos y accesorios especificados por el fabricante.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 3 10 Sólo el personal calificado puede encargarse del servicio técnico. La asistencia técnica es necesaria si el aparato presenta algún daño, como por ejemplo, si el cable o la clavija de alimentación están dañados, si se derrama líquido o se introducen objetos dentro del aparato, si el aparato ha estado expuesto a la lluvia o humedad, si no opera correctamente o si se ha caído. 11 No toque el aparato o la antena durante una tormenta eléctrica.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 4 4 18 DESCONEXIÓN DE LA ALIMENTACIÓN Link-Loader recibe alimentación si el cable de alimentación está conectado. Desenchufe el cable de alimentación del tomacorriente de CA para eliminar la alimentación. 19 Mantenga el producto lejos de la luz directa del sol. 20 Limpieza Antes de iniciar labores de limpieza, desenchufe el cable de alimentación y limpie cuidadosamente la unidad con un paño suave para evitar arañazos superficiales.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 5 CONTENIDO ADVERTENCIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 INSTRUCCIÓNES DE LA SEGURIDAD ..... 2 PREPARACIÓN Accessorios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Información del panel frontal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Información del panel posterior . . . . . . . . . . . . . . . . . . . . . .
MFL41469212-sp-mi 4/28/09 11:28 AM Page 6 Si siente la TV fría al tocar, puede que haya un pequeño “flicker” cuando se ha encendido. Esto es normal, no hay nada malo con la TV. Unos pocos defectos de puntos pueden ser visibles en la pantalla, apareciendo en un color rojo, verde o azul. Pero ellos no tienen ningún efecto equivocado para la función del monitor. Evitese tocar la pantalla LCD o agarrarla con su(s) dedo(s) por un periodo largo de tiempo.
MFL41469212-sp-mi 4/28/09 1:36 PM Page 7 PREPARACIÓN ACCESORIOS OG ME MO RY/ER ASE 1 4 2 7 MUT VO E IN CA PT PU T ION 3 6 0 9 TV M CH L 5 8 TU EN Q.V RE IE 2 7 SL UN D RAT EE ME MO RY/ER ASE 4 L 5 W SO PO W ER A. PR OG 1 VO CH U TS FA V EN TE R M MUT P 8 E 0 IN CA PT IO PU T N 3 6 9 IO VO CH L FA V PREPARACIÓN Asegurese de que los siguientes accesorios estén incluidos con su TV.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 8 PREPARACIÓN INFORMACIÓN DEL PANEL FRONTAL ■ La imagen puede ser diferente a la de su televisor. PREPARACIÓN Para 22LG30R/C, 22LF15R Botón Botón Botón Botones de Botones de INPUT MENU ENTER VOLUME (F,G) CHANNEL (E,D) INPUT MENU ENTER VOL CH Indicador de Encendido/Standby Se ilumina en rojo en el modo de espera. Se ilumina de color azul cuando el aparato está encendido.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 9 PREPARACIÓN Para 26/32LF15R CH VOL Botones de CHANNEL Botones de VOLUME ENTER Botón ENTER MENU Botón MENU INPUT Botón INPUT Indicador de Encendido/Standby Se ilumina en rojo en el modo de espera. Se ilumina de color azul cuando el aparato está encendido. (El I n d i c a d o r d e E s t a d o puede ajustarse en el menú O P C I Ó N.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 10 PREPARACIÓN INFORMACIÓN DEL PANEL POSTERIOR ■ La imagen puede ser diferente a la de su televisor.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 11 Para 26/32LF15R PREPARACIÓN 10 9 HDMI IN 1 SERVICE ONLY IN AV 5 6 VIDEO (MONO) AUDIO AUDIO VIDEO OUT COMPONENT IN VARIABLE AUDIO OUT ANTENNA IN 8 1 HDMI/DVI IN, HDMI IN Conexión digital. Compatible con video HD y audio digital. No es compatible con 480 entrelazado(Para 22LG30R/C)/576 entrelazado. Acepta video DVI con un adaptador o un cable de HDMI a DVI (no incluido) (Para 22LG30R/C). 2 RGB (PC) IN (Para 22LG30R/C) Conexión análoga a la PC.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 12 PREPARACIÓN INSTALACIÓN DE LA BASE ■ La imagen puede ser diferente a la de su televisor. PREPARACIÓN Para 22LG30R/C, 22LF15R 1 Coloque con cuidado pantalla de la TV sobre una superficie acolchada que la proteja de posibles daños. 2 Monte el S O P O R T E D E L C O N J U N T O en la B A S E D E L S O P O R T E de la TV. Introduzca el S O P O R T E D E L C O N J U N T O en la B A S E D E L S O P O R T E de la TV hasta que se oiga un click.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 13 Para 26/32LF15R Coloque con cuidado la pantalla de la TV sobre una superficie acolchada que la proteja de posibles daños. 3 Monte la TV como se ilustra. 2 Monte el s o p o r t e d e l c o n j u n t o en la b a s e d e l s o p o r t e de la TV. 4 Ajuste firmemente los 4 tornillos en los huecos de la parte posterior de la TV.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 14 PREPARACIÓN ORGANIZADOR DE CABLES Para 22LG30R/C, 22/26/32LF15R ■ Es probable que la imagen sea un poco diferente que su unidad de TV. Para 22LG30R/C, 22LF15R PREPARACIÓN 1 Conecte los cables necesarios. Para conectar un equipo adicional, vea la sección de CONEXIONES DE EQUIPO EXTERNO. 2 Instale el CLIP SUJETADOR DE CABLES como la imagen. Para 26/32LF15R 1 Conecte los cables necesarios.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 15 INSTALACIÓN DE UN PEDESTAL DE ESCRITORIO ■ La imagen puede ser diferente a la de su televisor. 10,1 cm 10,1 cm 10,1 cm CUIDADO G G 10,1 cm PREPARACIÓN Para conseguir una ventilación adecuada, deje un espacio de 10,1 cm de separación entre la pared y los costados del televisor. Asegure la ventilación adecuada dejando el espacio recomendado. No instale la unidad próxima o sobre ninguna fuente de calor.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 16 PREPARACIÓN CUBIERTA DE PROTECCIÓN ■ La imagen puede ser diferente a la de su TV.z PREPARACIÓN Para 22LG30R/C, 22LF15R 1 Afloje los tornillos del televisor. 2 Doble el C U E R P O D E B I S A G R A S y tírelo hacia atrás. CUERPO DE BISAGRAS 3 Inserte la C U B I E R T A D E P R O T E C C I Ó N en el televisor. CUBIERTA DE PROTECCIÓN 4 16 Ajuste firmemente los 4 tornillos en los huecos de la parte posterior de la TV.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 17 Tras extraer el soporte, instale la C U B I E R T A D E P R O T E C C I Ó N incluida sobre el hueco dejado por este. Inserte la C U B I E R T A D E P R O T E C C I Ó N en el televisor hasta que escuche un sonido de chasquido.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 18 PREPARACIÓN POSICIÓN DE LA PANTALLA Para 22LG30R/C, 22LF15R ■ ■ La imagen puede ser diferente a la de su televisor. Ajuste la posición del panel en diversas formas para obtener una máxima comodidad. PREPARACIÓN • Rango de inclinación 12 0 0 3 SISTEMA DE SEGURIDAD KENSINGTON Para 22LG30R/C, 22LF15R - El televisor tiene instalado un conector de Sistema de seguridad Kensington en el panel posterior.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 19 ■ Para prevenir daños, no conecte a la corriente hasta que estén instaladas todas las conexiones entre los dispositivos. ■ La imagen puede ser diferente a la de su televisor. CONEXIÓN DE LA ANTENA O CABLE PREPARACIÓN 1. Antena (analógica) Toma de entrada de pared o antena exterior sin conexiones a caja de cables. Para lograr la mejor calidad de imagen, ajuste la posición de la antena si fuera necesario.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 20 CONEXIONES DE EQUIPO EXTERNO Para evitar daños en el equipo, no enchufe ningún cable de alimentación hasta haber finalizado la conexión completa de todo el equipo. ■ Esta parte de la CONEXIONES DE EQUIPO EXTERNO utiliza principalmente imagen para modelo 22LG30R/C. ■ INSTALACIÓN DEL HDSTB Este TV puede recibir señales de la transmisión digital/cable sin una caja sintonizadora externa. Pero si ud.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 21 Conexión HDMI AUDIO (RGB/DVI) RGB(PC) IN 1 Conecte la salida HDMI del decodificador de señales digitales al conector H D M I / D V I I N o HDMI IN(Para 2 2 /2 6 / 3 2 L F 1 5 R ) en el televisor. HDMI/DVI IN AV IN VIDEO 2 No se necesita conexión de audio por separado. HDMI admite audio y video. RS-232C IN (CONTROL & SERVICE) AUDIO ( MONO) 1 2. Cómo usar VIDEO ■ Encienda el decodificador digital.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 22 CONEXIONES DE EQUIPO EXTERNO Conexión de DVI a HDMI (Excepto 22/26/32LF15R) CONEXIONES DE EQUIPO EXTERNO 1 Conecte la salida de DVI del decodificador digital al puerto de H D M I / D V I I N en la unidad. 2 Conecte las salidas de audio del decodificador al puerto de A U D I O ( R G B / D V I) I N en la unidad. HDMI/DVI IN AV IN VIDEO RS-232C IN CONTROL & SERVICE) S-VIDE AUDIO ( MONO) 2 1 VIDEO 2.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 23 INSTALACIÓN DEL DVD Conexión de componente 1. Cómo conectar Y Conecte las salidas de video (Y, PB, PR) del DVD a los puertos de C O M P O N E N T I N V I D E O en la unidad. Haga coincidir los colores de los conectores (Y = Verde, PB = Azul, PR = Rojo). PB PR L R AUDIO (RGB/DVI) IN RGB(PC) IN IN 2 1 Conecte las salidas de audio del DVD a los puertos de C O M P O N E N T I N A U D I O en la unidad. 2 AV IN VIDEO 2.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 24 CONEXIONES DE EQUIPO EXTERNO Conexión de S-Video (Excepto 22/26/32LF15R) ANTENNA AV IN 1. Cómo conectar CONEXIONES DE EQUIPO EXTERNO 1 Conecte la salida de S-VIDEO del DVD a la entrada de S - V I D E O en la unidad. 2 Conecte las salidas de audio del DVD a los puertos de la entrada de A U D I O en la unidad. VIDEO ■ ■ H/P ( MONO) CE) VIDEO AUDIO COMPONENT IN 2 2. Cómo usar ■ S-VIDEO AUDIO 1 Encienda el reproductor de DVD, inserte un DVD.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 25 INSTALACIÓN DEL VCR ■ ■ Para evitar ruido en la imagen (interferencia), deje una distancia adecuada entre el VCR y la TV. Si el formato de imagen es de 4:3, las imagenes congeladas en los lados de la pantalla se pueden quedar visibles permanentemente. Este fenómeno es común para todos los televisores y no lo cubre la garantía.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 26 CONEXIONES DE EQUIPO EXTERNO Cuando lo conecta con el cable RCA ANTENNAANTEN IN AV IN 1. Cómo conectar CONEXIONES DE EQUIPO EXTERNO V I D E O entre la TV y el Conecte las salidas de A U D I O/V VCR.Coincida los colores de salidas (Video = amarillo, Audio izquierdo = blanco, Audio derecho = rojo) 1 AUDIO (RGB/DVI) IN RGB(PC) IN HDMI/DVI IN S-VIDEO AUDIO VIDEO RS-232C IN (CONTROL & SERVICE) ( MONO) VIDEO AUDIO COMPONENT IN 2.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 27 INSTALACIÓN DE LA PC Para 22LG30R/C Esta TV proporciona la capacidad de Plug and Play, significa que la PC se ajusta automáticamente a los ajustes de la TV. Conexión VGA (D-Sub de 15 pins) AUDIO (RGB/DVI) IN RGB(PC) IN HDMI/DVI IN ANTE 1. Cómo conectar 1 Conecte la salida de VGA de la PC al puerto de R G B ( P C ) I N en la unidad. 2 Conecte las salidas de audio de la PC al puerto de A U D I O ( R G B / D V I ) I N en la unidad.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 28 CONEXIONES DE EQUIPO EXTERNO ! NOTAS Nosotros le recomendamos que use 1 680 x 1 050 para el modo PC, esto le ofrecerá la mejor calidad de imagen. G Para disfrutar de una imagen y sonido intensos, conecte el PC a la TV. G Evite mantener una imagen fija en la pantalla de TV durante largos periodos de tiempo. La imagen fija puede quedarse impresa permanentemente en la pantalla; utilice un salvapantallas siempre que sea posible.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 29 AJUSTE ESTÉREO EXTERNO Para 26/32LF15R Utilice esta función para conectar un amplificador externo o añadir un subwoofer a su sistema de sonido envolvente. IN 1 AV VIDEO L/MONO L/ MONO AUDIO R OUT 2 Configure sus altavoces a través de su amplificador analógico estéreo, según las instrucciones incluidas con el amplificador. ! N OTA G Al conectar con un equipo de audio externo, como amplificadores o altavoces, por favor, apague los altavoces de la TV.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 30 CONEXIONES DE EQUIPO EXTERNO AJUSTE DE LA SALIDA AV OUT Para 26/32LF15R El aparato de TV tiene una capacidad de salida de señal especial que le permite acoplar una segunda TV o monitor. L/MONO AUDIO IN 1 VIDEO AV VIDEO R L/MONO L/ MONO AUDIO R OUT CONEXIONES DE EQUIPO EXTERNO 1 Conecte la segunda TV o el monitor a la toma A V O U T de la TV.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 31 CONFIGURACIÓN DE PANTALLA PARA EL MODO PC Configuración automática (sólo modo RGB PC) (Excepto 22/26/32LF15R) CONEXIONES DE EQUIPO EXTERNO Ajusta automáticamente la posición y minimiza la fluctuación de la imagen. Aunque la imagen no sea aún correcta, su configuración está funcionando, pero necesita más ajustes. Configuración automática Esta función sirve para ajustar automáticamente la posición de la pantalla, el reloj y la fase.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 32 CONEXIONES DE EQUIPO EXTERNO ■ Para 22LG30R/C Config. Manual - Ajuste de las funciones de pantalla Fase, Reloj, Posicion (sólo modo RGB PC) Si la imagen no fuese clara tras el ajuste automático, especialmente si los caracteres fluctuaran, ajuste la imagen en fase manual.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 33 Inicialización (Restablecer el valor original de fábrica) CONEXIONES DE EQUIPO EXTERNO Esta función opera en el modo actual. Para iniciar el valor ajustado. Imagen 1 Pulse el botón M E N U y después use el botón para seleccionar el menú Imagen. D o 2 Pulse el botón G y después use el botón seleccionar Pantalla.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 34 VER LA TV / CONTROL DE CANAL FUNCIONES DE LOS BOTONES DEL CONTROL REMOTO Cuando use el control remoto dirija el sensor del control remoto hacia panel frontal de la TV. MTS Selecciona el sonido MTS: Mono, Estereo o SAP. G p.65 A.PROG Búsquedas para los canales disponible. G p.38 (AUTO PROGRAM) VER LA TV / CONTROL DE CANAL MEMORY/ERASE Memoriza o borra el canal seleccionado. G p.39 CAPTION Selecciona el modo de subtítulos. G p.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 35 POWER Enciende su TV o deja cualquier otro equipo programado encendido o apagado dependiendo del modo. INPUT Los modos de entrada externa se dan rotación en secuencia regular: TV, AV, Component, RGB PC y HDMI/DVI. Botones Numerados MUTE Enciende y apaga el sonido. G p . 3 6 FAV Se desplaza a través de los canales programados favoritos. G p .
MFL41469212-sp-mi 4/28/09 11:28 AM Page 36 VER LA TV / CONTROL DE CANAL ENCENDIENDO LA TV Primero conecte el cordón de alimentación correctamente. En este momento, la TV se cambia al modo de espera. ■ En el modo de espera para encender la TV, presione los botones I N P U T o C H (D o E) de la TV o presione los botones P O W E R, 9 ) del control remoto.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 37 SELECCIÓN Y AJUSTE DEL MENÚ PANTALLA El OSD (On Screen Display, Despliegue En la Pantalla) de su TV puede ser un poco diferente que este manual. 1 Presione el botón G y enseguida presione los botones D E F G para seleccionar un ítem del menú. Configuración Imagen Audio Sinto.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 38 VER LA TV / CONTROL DE CANAL BÚSQUEDA DE CANALES Sinto. Auto: Búsqueda de canales VER LA TV / CONTROL DE CANAL El Sinto. Auto debe memorizar todos los canales activos en su área antes de poder usar la TV. Hay dos maneras de almacenar canales en la memoria de la TV. Y ud. también puede usar. Una se llama S i n t o . A u t o y la otra se llama S i n t o n i z a c i ó n M a n u a l. En el modo S i n t o . A u t o, la TV memorizará los canales en el orden numérico.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 39 Sintonización Manual: Agregar/Eliminar los Canales Ud.puede agregar o eliminar los canales de la escaneada manual de los canales. Use el botón C H D E o de NÚMERO para seleccionar el número de canal que ud. quiere agregar o eliminar. 2 Presione el botón M E M O R Y / E R A S E. 3 Presione el botón M E M O R Y / E R A S E para seleccionar M e m o r i a o B o r r a r. 4 Presione el botón E N T E R para regresar a la TV donde estaba viendo.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 40 VER LA TV / CONTROL DE CANAL AJUSTE FINO DE SINTONIZACIÓN Normalmente la sintonización fina sólo es necesaria en caso de una mala recepción. VER LA TV / CONTROL DE CANAL Configuración 1 Presione el botón M E N U y luego presione el botón D o E para seleccionar el menú Configuración. 2 Presione el botón G y luego presione el botón D o E para seleccionar S i n t o n i z a c i ó n M a n u a l. Sinto.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 41 AMPLIFICADOR Si la recepción es débil, seleccione Enc. en R e f o r z a d a A p a g". Cuando la señal sea fuerte, seleccione la opción °A VER LA TV / CONTROL DE CANAL Configuración 1 Presione el botón M E N U y luego presione el botón D o E para seleccionar el menú Configuración. 2 Presione el botón G y luego presione el botón D o E para seleccionar S i n t o n i z a c i ó n M a n u a l. Sinto.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 42 VER LA TV / CONTROL DE CANAL AJUSTE DE CANALES FAVORITOS Esta función le permitirá seleccionar directamente sus programas favoritos. Presione repetidamente el botón FAV para seleccionar programas favoritos guardados. VER LA TV / CONTROL DE CANAL Configuración 1 Presione el botón M E N U y luego presione el botón D o E para seleccionar el menú Configuración. 2 Presione el botón G y luego presione el botón para seleccionar Favorito. D o Sinto.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 43 BLOQUEO DE CONTROLES La TV puede ajustarse de tal forma que le sea necesario el mando a distancia para controlarla. Esta función puede utilizarse para evitar el uso sin autorización. Esta TV está programada para recordar qué opción fue establecida por última vez, incluso si se apaga la unidad. VER LA TV / CONTROL DE CANAL Opción 1 Presione el botón M E N U y luego presione el botón D o E para seleccionar el menú Opción.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 44 CONTROL DE IMAGEN TAMAÑO DE LA IMAGEN (CONTROL DE RELACION DE ASPECTO) Esta característica le permite elegir la forma en la que aparece una imagen análoga con una relación de aspecto de 4:3 en el televisor. Cuando recibe una imagen análoga con una relación de aspecto de 4:3 en el televisor de 16:9, es necesario especificar cómo se mostrará la imagen. ■ 22LG30R: Componente, RGB PC o HDMI fuente de entrada de relación de aspecto 4:3 ó 16:9.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 45 AJUSTES DE LA IMAGEN PRESTABLECIDA Modo imagen - Presintonizada La Modo imagen ajusta la TV para obtener el mejor aspecto de la imagen. Seleccione el valor preestablecido en el menú de Modo imagen basado en la categoría del programa. Los ajustes I n t e n s o , E s t á n d a r , C i n e , D e p o r t e s , V i d e o j u e g o s son preestablecidos en fábrica para lograr la mejor calidad de imagen, y no son ajustables.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 46 CONTROL DE IMAGEN Control de tono de color automático (Fria/Medio/Cálida) Seleccione la opción Fria para inicializar los valores (restablecer los ajustes por defecto). CONTROL DE IMAGEN Escoja uno de los tres ajustes de color automático. Ajustelo en Cálida para intensificar la gama de colores Cálida como el rojo, o ajuste Fria para disfrutar colores menos intensos como el incremento del azul.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 47 CONTROL MANUAL DE IMAGEN Modo Imagen – Modo usuario CONTROL DE IMAGEN L u z d e f o n d o Para controlar el brillo de la pantalla, ajuste el brillo del panel LCD. Contraste Ajusta la diferencia entre los niveles de luz y oscuridad de la imagen. Brillo Incrementa o reduce la cantidad de blanco en la imagen. Color Ajusta la intensidad de todos los colores. Nitidez Ajusta el nivel de la nitidez de los bordes entre zonas de imagen iluminadas y oscuras.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 48 CONTROL DE IMAGEN Tono de color - Modo usuario Para ajustar el rojo, verde y azul a cualquier temperatura de color que prefiera. Este menú se activa tras seleccionar las opciones (Usuario 1 o Usuario 2) en el modo imagen. CONTROL DE IMAGEN Imagen 1 Pulse el botón M E N U y después use el botón seleccionar el menú Imagen. 2 Pulse el botón G y después use el botón D o E para seleccionar T e m p e r a t u r a C o l o r.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 49 XD - TECNOLOGÍA DE MEJORA DE LA IMAGEN XD es una tecnología de perfeccionamiento de imagen exclusiva de LG Electronics que permite desplegar una fuente HD a través de un avanzado procesador de algoritmo de señal digital. Esta función no está disponible en el modo RGB PC (Para 22LG30R/C).
MFL41469212-sp-mi 4/28/09 11:28 AM Page 50 CONTROL DE IMAGEN AVANZADO - GAMMA Valores de gama altos presentan imágenes pálidas y valores de gama bajos muestran imágenes de contraste alto. Esta función no está disponible en el modo RGB PC (Para 22LG30R/C). CONTROL DE IMAGEN Imagen 1 Pulse el botón M E N U y después use el botón seleccionar el menú Imagen. 2 Pulse el botón G y después use el botón D o E para seleccionar A v a n z a d o.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 51 AVANZADO - MODO DE PELÍCULA Configurar la TV para obtener la mejor calidad de imagen durante el visionado de películas. Esta función opera sólo en modo de TV, AV, y Componente 480 entrelazado/576 entrelazado. CONTROL DE IMAGEN Imagen 1 2 Pulse el botón M E N U y después use el botón seleccionar el menú Imagen.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 52 CONTROL DE IMAGEN AVANZADO - NIVEL DE NEGRO Al disfrutar de una película, esta función ajusta la TV para obtener la mejor calidad de imagen. Ajustando el contraste y el brillo de la pantalla mediante el nivel de negro de la pantalla. CONTROL DE IMAGEN Imagen 1 Pulse el botón M E N U y después use el botón seleccionar el menú Imagen. 2 Pulse el botón G y después use el botón D o E para seleccionar A v a n z a d o.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 53 AVANZADO - PROTECCIÓN VISUAL Para 26/32LF15R La función Protección Visual limita el brillo del LCD. Reduce el deslumbramiento de los ojos rebajando el voltaje de la retroiluminación para reducir el brillo si el APL (nivel de imagen medio) es demasiado alto. Al seleccionar un modo imagen (estándar, videojuegos, deportes, Usuario1 y Usuario2), puede activar esta función.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 54 CONTROL DE IMAGEN RESTABLECIMIENTO DE LA IMAGEN Restablece la configuración de fábrica a los ajustes modo imagen, Temperatura color, XD, Avanzado, Relación de Aspecto. CONTROL DE IMAGEN Imagen 1 Pulse el botón M E N U y después use el botón seleccionar el menú Imagen. D o 2 Pulse el botón G y después use el botón cionar R e s t a b l e c e r I m a g e n.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 55 INDICADOR DE ENCENDIDO Para 26/32LF15R Esta función le ayuda a ajustar el brillo del parpadeo del LED del sistema al encender el equipo. CONTROL DE IMAGEN Opción 1 Pulse el botón M E N U y después use el botón seleccionar el menú O p c i ó n. 2 Pulse el botón G y después use el botón D o E para seleccionar I n d i c a d o r d e E s t a d o.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 56 CONTROL DE IMAGEN RESTABLECER AJUSTES DE FÁBRICA Utilizar para restablecer rápidamente todas las opciones del menú a sus valores de fábrica originales. CONTROL DE IMAGEN Opción 1 Pulse el botón M E N U y después use el botón seleccionar el menú O p c i ó n. 2 Pulse el botón G y después use el botón D o E para seleccionar M o d o d e F á b r i c a.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 57 CONTROL DE SONIDO Y DE IDIOMA NIVELADOR AUTOMÁTICO DE VOLUMEN (AUTOMÁTICO DE VOLUMEN) El volumen automático mantiene al mismo nivel el volumen al cambiar de programa. Audio 2 Pulse el botón M E N U y después use el botón seleccionar el menú A u d i o. D o E Modo de Audio Volumen Automático Balance Bocina de TV Salida de audio para Pulse el botón G y después use el botón D o E para seleccionar V o l u m e n A u t o m á t i c o.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 58 CONTROL DE SONIDO Y DE IDIOMA AJUSTES DE SONIDO PREESTABLECIDOS (MODO DE AUDIO) El modo de sonido le permite disfrutar del mejor sonido sin necesidad de realizar ajustes especiales, porque la TV establece las opciones de sonido más adecuadas basándose en el contenido del programa.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 59 AJUSTE DE SONIDO - MODO USUARIO Ajuste del ecualizador de audio. Audio Pulse el botón M E N U y después use el botón seleccionar el menú A u d i o. 2 Pulse el botón G y después use el botón D o E para seleccionar M o d o d e A u d i o. D o Modo de Audio Volumen Automático Balance Bocina de TV Salida de audio Epara DE F G 0 MENU 1 3 Pulse el botón G y después use el botón D o E para seleccionar U s u a r i o. 4 Presione el botón G.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 60 CONTROL DE SONIDO Y DE IDIOMA AJUSTE DE BALANCE Puede ajustar el balance de sonido de las bocinas a los niveles que desea ud. Audio CONTROL DE SONIDO Y DE IDIOMA 1 Pulse el botón M E N U y después use el botón seleccionar el menú A u d i o. 2 Pulse el botón G y después use el botón D o E para seleccionar B a l a n c e.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 61 DISPOSICIÓN DE BOCINAS DE TV Para 26/32LF15R Es posible ajustar el estado del altavoz interno. En los modos TV, AV, COMPONENTE y HDMI, el audio del altavoz interno puede funcionar aun cuando no hay señal de vídeo. Si desea utilizar un sistema externo hi-fi, apague los altavoces internos de la TV. Audio G Pulse el botón M E N U y después use el botón seleccionar el menú A u d i o.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 62 CONTROL DE SONIDO Y DE IDIOMA SELECCIÓN DE SALIDA DE AUDIO Para 26/32LF15R Seleccione S a l i d a F i j a o S a l i d a V a r i a b l e para conectar las salidas de audio. CONTROL DE SONIDO Y DE IDIOMA 1 2 Pulse el botón M E N U y después use el botón seleccionar el menú A u d i o.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 63 SELECCIÓN DEL LENGUAJE EN LA PANTALLA Los menus pueden ser mostrados en la pantalla en el idioma inicial seleccionado. Primero seleccione su idioma. Pulse el botón M E N U y después use el botón D o E para seleccionar el menú O p c i ó n. 2 Pulse el botón G y después use el botón I d i o m a ( L a n g u a g e ). 3 4 D o E para seleccionar Pulse el botón G a continuación, utilice el botón F o G para seleccionar el idioma que desee.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 64 CONTROL DE SONIDO Y DE IDIOMA SUBTITULAJE El subtitulaje es un proceso que convierte la porción de audio de un programa de televisión en palabras escritas, las cuales aparecen en la pantalla del televisor en una forma similar a los subtítulos. El subtitulaje permite al televidente leer el diálogo y narración de los programas de televisión. • IGNICIÓN: La imagen puede vibrar, desviarse,llenarse de manchas negras o rayas horizontales.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 65 DISFRUTE DE LA TRANSMISIÓN ESTÉREO/SAP La TV puede recibir programas MTS estéreo y SAP que acompañen la programación ya que se transmite una señal de audio adicional de igual calidad que la señal original y cuando selecciona Stereo (Estéreo) o SAP en el control remoto. El sonido Mono se recibe automáticamente si el programa emite en Mono aunque se haya seleccionado Stereo o SAP.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 66 CONFIGURACIÓN HORARIA AJUSTE DEL RELOJ Deberá realizar correctamente la configuración horaria antes de utilizar la función de encendido/apagado por temporizador. Si la hora se borrase debido a un corte eléctrico o por desenchufar la TV, vuelva a ajuste el reloj. Hora CONFIGURACI Ó N HORARIA 1 Pulse el botón M E N U y después use el botón seleccionar el menú H o r a. 2 Pulse el botón cionar R e l o j.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 67 AJUSTES DE CONEXIÓN/DESCONEXIÓN AUTOMÁTICA MEDIANTE TEMPORIZADOR La función de desconexión automática pone la TV en espera tras un periodo programado. Dos horas después de encender la TV mediante el temporizador de conexión, la unidad volverá automáticamente al modo de espera, a menos que presione cualquier botón. Una vez configurado el temporizador de conexión o desconexión, estas funciones se activarán diariamente a la hora establecida.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 68 CONFIGURACIÓN HORARIA CONFIGURACIÓN DEL TEMPORIZADOR DE APAGADO AUTOMÁTICO El Temporizador para Dormir apaga el TV después de un tiempo prefijado. Nota: Si apaga el TV después de haber programado el temporizador para dormir, el ajuste se borrará. 1 CONFIGURACI Ó N HORARIA 68 Presione el botón S L E E P para fijar el tiempo para dormir. ‘ - - - ’ aparecerá en la pantalla, seguido de 10, 20, 30, 60, 90, 120, 180 y 240.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 69 CONFIGURACIÓN DE APAGADO AUTOMÁTICO Si la TV se enciende y no hay señal de entrada, ésta se apagará automáticamente tras 10 minutos. Hora Pulse el botón M E N U y después use el botón seleccionar el menú H o r a. 2 Pulse el botón G y después use el botón cionar A p a g a d o r A u t o m á t i c o.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 70 APÉNDICE LISTA DE VERIFICACIÓN DE PROBLEMAS No se trabaja normalmente. Verifique para ver si hay algún objeto entre el producto y el control remoto causando la obstrucción. Asegúrese de apuntar el control remoto directamente al televisor. ■ Están puestas las baterías con la polaridad correcta (+con +, -con -)? ■ Está correcta la configuración del modo remoto de la operación: TV, VCR etc.? ■ Ponga nuevas baterías.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 71 No sirve la función de audio. Presione el botón VOL o Volume. Sonido mudo? Presione el botón MUTE. ■ Intente otro canal. El problema puede ser con la transmisión. ■ Están instalados apropiadamente los cables de audio? ■ Imagen OK pero No sonido No salida de una de las bocinas ■ ■ Ajuste el Balance en la opción del menú.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 72 APÉNDICE MANTENIMIENTO Las malfunciones anticipadas pueden ser prevenidas. La limpieza regular y cuidadosa puede extender la suma de tiempo que ud.va a tener su nueva TV. Asegurese apagar la TV y desenchufar el cordón de alimentación antes de empezar cualquier tipo de limpieza. Limpiando la pantalla 1 Aqui hay una buena manera para mantener su pantalla limpia por un tiempo.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 73 ESPECIFICACIONES DEL PRODUCTO 22LG30R/C, 22LF15R (22LG30R/C-MA, 22LF15R-MA) MODELO Dimensiones 26LF15R (26LF15R-MA) 32LF15R (32LF15R-MA) incluyendo la base 522,2 x 431,5 x 189,2 mm 26,1 x 20,0 x 8,9 pulgadas 31,5 x 23,7 x 8,9 pulgadas 20,5 x 16,9 x 7,4 pulgadas 663,3 x 508,2 x 227,3 mm 801,8 x 604,2 x 227,3mm excluyendo la base 522,2 x 384,2 x 69,0 mm 26,1 x 17,7 x 3,1 pulgadas 31,5 x 21,4 x 3,1inches 20,5 x 15,1 x 3,3 pulgadas 663,3 x 449,8 x 80,0 mm 801,
MFL41469212-sp-mi 4/28/09 11:28 AM Page 74 APÉNDICE CONFIGURACIÓN DE DISPOSITIVO EXTERNO DEL CONTROL Excepto 22/26/32LF15R El puerto RS-232 permite conectar el conector de entrada RS-232C a un dispositivo de control externo (como una computadora o un sistema de control de A/V) para controlar en forma externa las funciones del televisor. El RS-232 de esta unidad está diseñado para ser utilizado con hardware y software de control de RS-232 de terceros.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 75 Configuraciones de RS-232C Configuración de 3-Cables (No estándar) Configuración de 7-Cables (Cable de módem NULL hembra-hembra serial ) RXD TXD GND DTR DSR RTS CTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS TXD RXD GND DSR DTR CTS RTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 TXD RXD GND DTR DSR RTS CTS Configuración de ID Use esta función para especificar un número de ID de la unidad.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 76 APÉNDICE Lista de Referencia de los Comandos COMANDO 1 COMANDO 2 COMANDO 1 COMANDO 2 DATO (Hexadecimal) 01. Alimentación k a 00 ~ 01 13. Balance k t 00 ~ 64 02. Relación de Aspecto k c (G p.77) 14. Temperatura de color k u 00 ~ 03 03. Pantalla muda k d 00 ~ 01 15. Ajuste de rojo k v 00 ~ 50 04. Silenciador de volumen k e 00 ~ 01 16. Ajuste de verde k w 00 ~ 50 05. Control de volumen k f 00 ~ 64 17.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 77 0 5 . Control de volumen (Comando: k f) 0 1 . Potencia (Comando: k a) Para controlar la potencia Encendida/Apagada de la TV. Transmisión [k][a][ ][Set ID][ ][Dato][Cr] Dato 00 : Apagado Dato 01 : Encendido Reconocimiento [a][ ][Set ID][ ][OK/NG][Dato][x] Para mostrar la potencia Encendida/Apagada. Transmisión [k][a][ ][Set ID][ ][FF][Cr] Para ajustar el volumen. Ud. también puede ajustar el volmen con los botones de volumen del control remoto.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 78 APÉNDICE 10. Nitidez (Comando: k k) Para ajustar la nitidez de pantalla. Ud. puede ajustar la nitidez en el menú Imagen. 15. Ajuste de rojo (Comando: k v) Para ajustar el rojo en la temperatura de color. Transmisión [k][k][ ][Set ID][ ][Dato][Cr] Transmisión [k][v][ ][Set ID][ ][Dato][Cr] Dato Min: 00 ~ Max: 50 Dato Min: 00 ~ Máx: 64 Refiérase a ‘Grupeo de dato real 2 G p .79. * Refiérase a ‘Grupeo de dato real 1’ G p .79.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 79 19. Auto-configuración (Comando: j u) Para ajustar la posición de imagen y minimizar el temblor de imagen automáticamente. Sólo se trabaja en el modo RGB PC.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 80 APÉNDICE Ejemplo) 21 . S e l e c c i ó n d e c a n a l (Commando: m a) 1. Comando: ma 00 23 xx xx xx xx 01 atributo (0x01): datos de imagen principal, dos partes (no es obligatorio), uso de canal físico, cable NTSC ‘xx’: en caso de sintonización de canal analógico el número de canal mayor o menor no importará Sintoniza canales en los números físicos siguientes.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 81 22. Mandar el código I R (Commando: m c) Para mandar el código de botón del control remoto (IR). Transmisión [m][c][ ][Set ID][ ][Dato][Cr] Reconocimiento [c][ ][Set ID][ ][OK/NG][Dato][x] Código (Hexa) Control Remoto Code (Hexa) Control Remoto 0F TV 44 0B INPUT 1A ENTER Q.VIEW 08 POWER 52 SOUND 79 RATIO 4D PICTURE 10-19 Teclas de números0-9 39 CAPTION 09 MUTE 0E SLEEP 02 VOL G 54 A.
MFL41469212-sp-mi 4/28/09 11:28 AM Page 82