LCD TV OWNER’S MANUAL 22LG3DCH 26LG3DCH 32LG3DCH 32LG3DC Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. This product qualifies for ENERGY STAR in the “factory default (Home mode)” setting and this is the setting in which power savings will be achieved.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 1 2 2 6 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 7 Only use attachments/accessories specified by the manufacturer. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.
20 ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PREPARATION Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Back Panel Information . . . . . . . .
FEATURES OF THIS TV USB IN SERVUCE ONLY HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing." Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. USB port shall be used for software update by service personnel only. is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.
PREPERATION ACCESSORIES Copyright© 2007 LGE, All Rights Reserved. CD Manual Owner’s Manual Power Cord Protective Bracket and Bolt for Power Cord (Refer to P.12) PREPARATION Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. 26/32LG3DCH, 32LG3DC only Protection Cover (Refer to P.11) (This feature is not available for all models.
PREPARATION FRONT PANEL INFORMATION ■ Image shown may differ from your TV. ■ NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it). PREPARATION CH CHANNEL(+, -) Buttons VOL VOLUME (+, -) Buttons Stand (only 32LG3DC) ENTER ENTER Button 32LG3DC model MENU Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on.
BACK PANEL INFORMATION ■ Image shown may differ from your TV.
PILLOW NORMAL SPEAKER SPEAKER SPEAKER SWITCH PREPARATION USB IN VIDEO RS-232C IN (SERVICE ONLY) REMOTE SERVUCE ONLY CONTROL OUT For 22LG3DCH ANTENNA IN M.P.I. 12 2 PILLOW SPEAKER 5 HDMI/DVI IN (MONO) AUDIO 15 PILLOW NORMAL SPEAKER SPEAKER SPEAKER SWITCH USB IN SERVUCE ONLY VIDEO RS-232C( IN) (SERVICE ONLY) 15 4 AV IN DVI AUDIO IN PREPARATION 14 13 RESET UPDATE 1 REMOTE CONTROL OUT 9 3 AV (Audio/Video) IN Analog composite connection.
STAND INSTRUCTION ■ Image shown may differ from your TV. INSTALLATION (Only 32LG3DC) Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the S T A N D B O D Y with C O V E R B A S E of the TV. 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Remove the four screws that hold the base on. 3 Detach the stand from TV.
PREPARATION CABLE MANAGEMENT ■ Image shown may differ from your TV. For 26/32LG3DCH, 32LG3DC PREPARATION 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the PROTECTIVE BRACKET and the screw as shown. It will help prevent the power cable from being removed by accident. PROTECTIVE BRACKET (This feature is not available for all models.) 2 For 22LG3DCH 1 Connect the cables as necessary.
DESKTOP PEDESTAL INSTALLATION ■ Image shown may differ from your TV. * This feature is not available for all models. For proper ventilation, allow a clearance of 4 inches on all four sides. 4 inches 4 inches CAUTION 4 inches G Ensure adequate ventilation by following the clearance recommendations. G Do not mount near or above any type of heat source.
PREPARATION VESA WALL MOUNTING PREPARATION Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall.
SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND ■ We recommend that you set the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV. ■ PREPARATION You should purchase necessary components to prevent TV from falling off of the stand.
PREPARATION ■ To prevent damage do not connect to the power outlet until all connections are made between the devices. ANTENNA OR CABLE CONNECTION Wall Antenna Socket or Outdoor Antenna without a Cable Box Connection. For optimum picture quality, adjust the direction if needed. Wall Antenna Socket Outdoor Antenna (VHF, UHF) R PREPARATION 1.
EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ This part of EXTERNAL EQUIPMENT SETUP mainly uses the picture for 32LG3DC model. ■ HD RECEIVER SETUP This TV can receive Digital Over-the-air or Digital Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. 1.
EXTERNAL EQUIPMENT SETUP HDMI Connection 1. How to connect UPDATE UP Connect the digital set-top box to H D M I / D V I I N jack on the TV. 2 No separate audio connection is necessary. HDMI supports both audio and video. ■ AV IN 1 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) (MONO) S-VIDEO AUDIO 2.
AUDIO IN (RGB/DVI) SPEAKER OUT REMOTE 8 CONTROL OUT DVI to HDMI Connection 26/32LG3DCH, 32LG3DC model 1. How to connect HDMI/DVI IN USB IN SERVUCE ONLY Connect the DVI output of the digital set-top box to the H D M I / D V I I N jack on the TV. 1 AV IN 1 COMPONENT IN Connect the audio output of the digital set-top box to the A U D I O I N ( R G B / D V I ) or A V I N A U D I O jack on the TV. 2 (MONO) S-VIDEO AUDIO RGB IN (PC) VIDEO 1 AUDIO IN (RGB/DVI) AUDIO VIDEO 2.
EXTERNAL EQUIPMENT SETUP DVD SETUP Component Connection (Except 22LG3DCH) 1. How to connect 2 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). Y PB PR L Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the TV. HDMI/DVI IN ■ ■ ■ Turn on the DVD player, insert a DVD.
S-Video Connection (Except 22LG3DCH) 1. How to connect Connect the audio outputs of the DVD to the A U D I O input jacks on the TV. 2. How to use ■ ■ ■ AV AV IN 1 S-VIDEO 2 AUDIO ( MONO ) COMPONENT IN Connect the S-VIDEO output of the DVD to the S - V I D E O input on the TV. VIDEO 1 VIDEO AUDIO 2 Turn on the DVD player, insert a DVD. Select the A V 1 input source on the TV using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all TVs and is not covered by warranty. ■ EXTERNAL EQUIPMENT SETUP Antenna Connection 1. How to connect 1 2 Connect the RF antenna out socket of the VCR to the A N T E N N A I N socket on the TV.
Composite (RCA) Connection V I D E O jacks between TV and Connect the A U D I O/V VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) AV IN IN 11 AV S-VIDEO 1 AUDIO ( MONO ) AUDIO (RGB/ 1 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select the A V or A V 1 input source on the TV using the I N P U T button on the remote control. ■ If connected to A V I N 2, select A V 2 input source on the TV (Except 22LG3DCH).
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 26/32LG3DCH, 32LG3DC model 1. How to connect 1 Camcorder Video Game Set VIDEO L R 2. How to use ■ ■ H/P Select the A V 2 input source on the TV using the I N P U T button on the remote control. (Except 22LG3DCH) If connected to A V I N or A V I N 1 input, select the A V or A V 1 input source on the TV. Operate the corresponding external equipment.
PILLOW SPEAKER SETUP ■ (Except 32LG3DC) Connect a pillow speaker to the LCD TV/Monitor. 1. How to connect PILLOW SPEAKER Connect an acccessory pillow speaker or wired remote control unit to this 6-pin jack. 3 Select P I L L O W S P E A K E R on the rear panel of the TV. ■ PILLOW SPEAKER NOTE: If the pillow speaker switch is set to Pillow Speaker, no sound will be heard from the TV speakers. Also, Auto Volume will be grayed out and not accessible on the Sound menu.
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection (Except 22LG3DCH) ( NO) RGB IN (PC) VIDEO 1. How to connect EXTERNAL EQUIPMENT SETUP 1 Connect the VGA output of the PC to the R G B I N( P C) jack on the TV. 2 Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. REMOT CONTROL 1 2. How to use ■ ■ 2 Turn on the PC and the TV.
26/32LG3DCH, 32LG3DC model DVI to HDMI Connection UPDATE 1. How to connect HDMI/DVI IN 1 Connect the DVI output of the PC to the H D M I / D V I I N jack on the TV. 2 Connect the PC audio output to the A U D I O I N ( R G B / D V I ) or A V I N A U D I O jack on the TV. S-VIDEO AUDIO (MONO) RGB IN (PC) VIDEO 1 2. How to use Turn on the PC and the TV. Select the HDMI input source on the TV using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode (Except 22LG3DCH) Selecting Resolution You can choose the resolution in RGB mode. The P o s i t i o n, P h a s e, and S i z e can also be adjusted. EXTERNAL EQUIPMENT SETUP Screen Resolution Auto config. Position Move G MENU Prev. 1024 x 768 1280 x 768 1360 x 768 1366 x 768 Size Phase Reset 1 ADJUST Press the A D J U S T button. 2 Select R e s o l u t i o n. 3 ENTER Select the desired resolution. ■ 4 RETURN 28 Return to TV viewing.
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. Move EXTERNAL EQUIPMENT SETUP Screen MENU Prev. Resolution Auto config. G To Set Position Size Yes No Phase Reset 1 ADJUST 2 Press the A D J U S T button. Select A u t o c o n f i g .. 3 ENTER Select Y e s.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB mode. EXTERNAL EQUIPMENT SETUP Screen Move MENU Prev. Resolution Auto config. D Position G F G E Size Phase Reset 1 ADJUST Press the A D J U S T button. ■ 2 Select P o s i t i o n, S i z e, or P h a s e.
Screen Reset (Reset to original factory values) Returns P o s i t i o n, S i z e, and P h a s e to the default factory settings. This feature operates only in RGB mode. Move MENU Prev. Resolution Auto config. Position Initialize Settings. Yes Size Phase Reset G No EXTERNAL EQUIPMENT SETUP Screen 1 ADJUST 2 Press the A D J U S T button. Select R e s e t. 3 ENTER Select Y e s.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS (Only 32LG3DC) When using the remote control, aim it at the remote control sensor on the TV. POWER Turns your TV on or off. POWER TV In AV1-2, Component, RGB, and HDMI input sources, screen returns to the last TV channel. TV PICTURE WATCHING TV / CHANNEL CONTROL INPUT External input modes rotate in regular sequence: TV, AV12, Component, RGB, and HDMI. PICTURE Selects the factory preset picture depend on the viewing environment. G p.
NUMBER button — (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. FLASHBK Tune to the last channel viewed. TIMER Select the amount of time before your TV turns off automatically. G p.70 CC Select a closed caption. G p.64 MUTE Switch the sound on or off. G p.35 CHANNEL Select available channels. UP/DOWN ADJUST Adjust the screen resolution, position, size and phase. G p.28 - p.31 WATCHING TV / CHANNEL CONTROL VOLUME UP Increase/decrease the sound level.
WATCHING TV / CHANNEL CONTROL TURNING ON TV WATCHING TV / CHANNEL CONTROL 34 1 First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the button on the TV or press the P O W E R button on the remote control. ■ Note: Only for 32LG3DCH the TV also turn on with C H ( + or - ) button on the remote. 2 Select the viewing source by using the I N P U T button on the remote control.
CHANNEL SELECTION 1 Press the C H ( + or - ) or NUMBER buttons to select a channel number. Adjust the volume to suit your personal preference. 1 Press the V O L ( + or - ) button to adjust the volume. 2 If you want to switch the sound off, press the M U T E button. 3 You can cancel the Mute function by pressing the MUTE or V O L ( + or - ) button.
WATCHING TV / CHANNEL CONTROL ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. Move Enter CHANNEL Auto Tuning Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Channel Label Channel Label Move Enter Press ‘Yes’ button to begin auto tuning. Yes No 1 MENU Select C H A N N E L. ENTER Select A u t o T u n i n g.
WATCHING TV / CHANNEL CONTROL Add/Delete Channel (Manual Tuning) If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CHANNEL Move Enter Move WATCHING TV / CHANNEL CONTROL Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Channel Label Channel Label Enter DIGITAL F G Select channel type and RF-channel number.
Channel Editing A custom list can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the topright corner of the screen. Move Enter Auto Tuning Manual Tuning Channel Edit Channel Label Add/Delete 1 MENU Select C H A N N E L. ENTER Select C h a n n e l E d i t.
WATCHING TV / CHANNEL CONTROL CHANNEL LABEL Choose preset labels for your channels. If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel even if you didn't preset a label for the channel. CHANNEL Move Enter WATCHING TV / CHANNEL CONTROL Auto Tuning Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Channel Label Channel Label Move Enter DIGITAL 2-1 Channel Logo F Disney Close 1 MENU Select C H A N N E L.
INPUT LIST TV AV1 AV2 Component RGB INPUT ENTER For 26/32LG3DCH 32LG3DC Select the desired input source. TV AV1 HDMI For 22LG3DCH RGB TV AV2 Component AV WATCHING TV / CHANNEL CONTROL 1 HDMI ■ ■ ■ ■ ■ T V: Select it to watch over-the-air, cable and digital cable broadcasts. A V 1 - 2: Select them to watch a VCR or other external equipment. C o m p o n e n t : Select them to watch DVD or a Digital set-top box. R G B: Select it to view PC input.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. ■ RGB input source use 4:3 or 16:9 aspect ratio. ! NOTE G If a fixed image is displayed on the screen for a long time, the image could become imprinted on the screen and remain visible. This phenomenon is rare on LCDs, but is possible when the image is on the screen for a very long time.
Set by program 16:9 Selects the proper picture proportion to match the source’s image. Adjust the picture horizontally, in a linear proportion to fill the entire screen. (4:3 16:9) Full (Only 22LG3DCH) When TV receives the wide screen signal, it will lead you to adjust the picture horizontally or vertically, in a linear proportion, to fill the entire screen fully. PICTURE CONTROL (16:9 4:3) 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio.
PICTURE CONTROL PICTURE CONTROL 44 Zoom 1 Just Scan Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video. Notes: If there is noise on the edges of the original signal, it will be visible when Just Scan is activated.
PRESET PICTURE SETTINGS Picture Mode - Preset There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually. PICTURE CONTROL Vivid 1PICTURE Press the P I C T U R E button repeatedly to select the picture options : V i v i d, S t a n d a r d, C i n e m a, S p o r t, G a m e and E x p e r t 1 - 2. 2 RETURN Return to TV viewing. ■ You can also adjust P i c t u r e M o d e in the PICTURE menu.
PICTURE CONTROL Color Tone - Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue.
MANUAL PICTURE ADJUSTMENT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard 50 • Sharpness 60 • Color 60 • Tint 0 • Backlight 80 E R G E 1 MENU Select P I C T U R E. ENTER Select P i c t u r e M o d e. ENTER Select V i v i d, S t a n d a r d, C i n e m a, S p o r t, or G a m e.
PICTURE CONTROL Picture Mode - Expert Control E x p e r t 1 and E x p e r t 2 allow you set you own custom settings. PICTURE Move Enter PICTURE Move Enter E Aspect Ratio : 16:9 • Contrast Picture Mode : Standard • Brightness Vivid • Backlight PICTURE CONTROL • Contrast 90 • Brightness 50 • Sharpness 60 • Color 60 • Tint • Color Cinema • Tint Sport R 0 E Game • Expert Control Real Cinema G • Reset Expert1 Expert2 MENU Select P I C T U R E.
PICTURE IMPROVEMENT SETTINGS Fresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection. Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors. Noise Reduction: Removes interference up to the point where it does not damage the original picture. Gamma: High gamma values display whitish images and low gamma values display high contrast images.
PICTURE CONTROL ADVANCED CONTROL - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature is disable in DTV and RGB mode.
ADVANCED CONTROL - REAL CINEMA Set up the TV for the best picture appearance for viewing movies. When you operate Real Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV/AV1-2, Component 480i/1080i, and HDMI 480i/1080i mode.
PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move Enter PICTURE Move E E • Contrast 50 • Contrast 50 • Brightness 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 i R • Sharpness 50 Resetting video configuration... • Color 50 • Tint G • Advanced Control PICTURE CONTROL 1 Select P I C T U R E. ENTER Select R e s e t. 2 3 52 ENTER Initialize the adjusted value. MENU Return to TV viewing.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. AUDIO Move : Off Auto Volume : Off Clear Voice : On Clear Voice : On Sound Mode 0 L : Standard Balance Enter Off On 0 L • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 ENTER Select A u t o V o l u m e. ENTER Select O n or O f f. 3 4 RETURN Return to the previous menu.
SOUND &LANGUAGE CONTROL CLEAR VOICE By differentiating the human sound range from others, it improves the sound quality of voices.
PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. S t a n d a r d, M u s i c, C i n e m a, S p o r t, and G a m e are preset for optimum sound quality at the factory and are not adjustable. Standard Press the S O U N D button repeatedly to select the sound options : S t a n d a r d, M u s i c, C i n e m a, S p o r t, and G a m e. 2 RETURN Return to TV viewing.
SOUND &LANGUAGE CONTROL SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Move Auto Volume : Off Clear Voice : On Balance Sound Mode 0 Enter L R : Standard : On Balance 0 L R : Standard • Treble 50 Treble 50 • Bass 50 • Bass 50 Bass 50 SOUND & LANGUAGE CONTROL Select A U D I O. ENTER Select S o u n d M o d e. ENTER Select S t a n d a r d, M u s i c, C i n e m a, S p o r t, or G a m e. ENTER Select T r e b l e or B a s s.
SRS TRUSURROUND XT Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standard stereo material.
SOUND &LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Move Auto Volume : Off Clear Voice : On Sound Mode 0 L R : Standard : On Balance 0 L Balance 0R : Standard • SRS TruSurround XT: Off Close 50 • Treble 50 • Bass 50 • Bass 50 SOUND & LANGUAGE CONTROL Select A U D I O. ENTER Select B a l a n c e. ENTER Make appropriate adjustments.
TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. AUDIO Move Enter AUDIO Move E : On Balance Sound Mode E Clear Voice Clear Voice 0 L : Standard R : On Balance Sound Mode 0 L • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 : On R : Standard • SRS TruSurround XT: Off • Reset TV Speaker Enter • Reset TV Speaker : On Off On MENU Select A U D I O. ENTER Select T V S p e a k e r. ENTER Select O n or O f f.
SOUND &LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Move : Off Auto Volume : Off Clear Voice : On Clear Voice : On Sound Mode 0 R Balance Sound Mode 0 Enter L • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 SOUND & LANGUAGE CONTROL 1 MENU Select A U D I O. ENTER Select R e s e t. 3 Initialize the adjusted value. R i Resetting audio configuration...
STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. MONO SAP Each time you press the S A P button, M o n o, S t e r e o, or S A P appear in turn. 2 RETURN Return to TV viewing. ■ If other languages available on the digital signal, select them with the S A P button.
SOUND &LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. OPTION Move Enter OPTION Move Enter Language : English Language : English Caption : Off Caption : Off English Menu Audio F English Close SOUND & LANGUAGE CONTROL 1 MENU Select O P T I O N. ENTER Select L a n g u a g e. ENTER Select A u d i o.
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. OPTION Move Enter OPTION Move Enter Language : English Language : English Caption : Off Caption : Off Menu Audio F English G English Close MENU Select O P T I O N. ENTER Select L a n g u a g e. ENTER Select M e n u. 2 3 4 SOUND & LANGUAGE CONTROL 1 Select your desired language. From this point on, the on-screen menus will be shown in the selected language.
SOUND &LANGUAGE CONTROL CAPTION MODE Caption must be provided to help people with hearing loss watch TV. This feature operates only in TV, AV/AV1-2 mode. 1 cc ■ Select Caption O n or O f f. When selecting O f f, Sub-menus for Analog, DTV, and Digital Option become disabled. Analog Broadcasting System Captions Caption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program.
Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. OPTION Move Enter OPTION Move Language : English Language : English Caption : Off Caption : CC1 Enter F Mode On G CC1 Digital Option Close MENU Select O P T I O N. ENTER Select C a p t i o n. ENTER Select O n.
SOUND &LANGUAGE CONTROL Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On. OPTION Move Enter OPTION Move Language : English Language : English Caption : Off Caption : CC1 F Enter On F G CC1 Mode Digital Option Close Custom G Size A Standard Font Font 1 Text Color White Text Opacity Solid Bg Color Black Bg Opacity Solid Close SOUND & LANGUAGE CONTROL 1 MENU Select O P T I O N.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
TIME SETTING Manual Clock Setup If the current time setting is wrong, set the clock manually. TIME Move Enter TIME Move Enter Manual Clock : Feb/21/2008/ 2:10 AM Clock F : Feb/21/2008/ 2:10 AM Off Time : Off Off Time : Off Year On Time : Off On Time : Off Month 2 Date 21 Hour 2 AM Sleep Timer : Off Sleep Timer : Off Auto Sleep : Off Auto Sleep : Off Minute 10 Eastern Time Zone Daylight Saving Auto Close TIME SETTING 1 MENU Select T I M E. ENTER Select C l o c k.
AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The O f f T i m e function overrides the O n T i m e function if they are both set to the same time. The TV must be in standby mode for the O n T i m e to work.
TIME SETTING SLEEP TIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. 10min 1 TIME SETTING TIMER Press the T I M E R button repeatedly to select the number of minutes. Sleep timer options: Off, 10, 20, 30, 60, 90, 120, 180, and 240 minutes. 2 RETURN Return to TV viewing. ■ 70 You can also adjust S l e e p T i m e r in the T I M E menu.
AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal for 10 minutes. TIME Move TIME Move Clock : Feb/21/2008/ 2:10 AM Clock : Feb/21/2008/ 2:10 AM Off Time : Off Off Time : Off On Time : Off On Time : Off Enter Sleep Timer : Off Sleep Timer : Off Auto Sleep : Off Auto Sleep : Off Enter Off On TV will be automatically turned off, in case of No Signal for 10 minutes. MENU Select T I M E. ENTER Select A u t o S l e e p. ENTER Select O n or O f f.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
Lock System Enables or disables the blocking scheme you set up previously. LOCK Move Lock System Enter : Off LOCK Move Lock System : On Set Password Set Password Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block Enter Off On 1 MENU 1 2 3 4 5 6 7 8 9 Select L O C K. Input the password. 0 3 Select L o c k S y s t e m.
PARENTAL CONTROL /RATINGS Set Password Change the password by inputting a new password twice. LOCK Move Lock System Enter : Off LOCK Lock System Set Password Set Password Block Channel Block Channel Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER PARENTAL CONTROL / RATING 2 1 2 3 4 5 6 7 8 9 Input the password. 0 3 Select S e t p a s s w o r d.
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. LOCK Move Lock System Enter : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Block/Unblock Move CH + Move Page MENU Previous RETURN EXIT 1 MENU 1 2 3 4 5 6 7 8 9 Select L O C K. Input the password. 0 3 Select B l o c k C h a n n e l. 4 ENTER Select a channel to block or unblock.
PARENTAL CONTROL /RATINGS MOVIE & TV RATING Movie Rating (MPAA) Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
TV Rating Children Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
PARENTAL CONTROL /RATINGS TV Rating General Based on the ratings, blocks certain TV programs that you and your family do not want to view.
DOWNLOADABLE RATING This function may become available in the future and will be available only for digital channels. This function operates only when TV has received Region5 Rating data.
PARENTAL CONTROL /RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries.
APPENDIX The audio function does not work. Press the VOL or VOLUME button. ■ Sound muted? Press the MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK but No sound No output from one of the speakers ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
APPENDIX IR CODES 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.
(Hexa) Code Function Note 08 POWER Remote control Button (Power On/Off) D6 0F TV Remote control Button 0B INPUT Remote control Button PICTURE Remote control Button 52 SOUND Remote control Button 0A SAP Remote control Button 79 RATIO Remote control Button 10-19 Number Key 0-9 Remote control Button 4C - (Dash) Remote control Button 1A FLASHBK Remote control Button 02 VOL + Remote control Button 03 VOL - Remote control Button 00 CH + Remote control Button 01 CH - Rem
86