OWNER’S MANUAL LCD TV Please read this manual carefully before operating your set and retain it for future reference. 22LG3DDH 26LG3DDH 32LG3DDH The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL P/NO : SAC34026007 (1006-REV02) www.lg.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 1 2 2 6 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 7 Only use attachments/accessories specified by the manufacturer. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.
20 ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PREPARATION Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Back Panel Information . . . . . . . .
FEATURES OF THIS TV HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LCC." USB IN SERVUCE ONLY Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. USB port shall be used for software update by service personnel only. IMPORTANT INFORMATION TO PREVENT “IMAGE BURN / BURN-IN” ON YOUR TV SCREEN ■ ■ ■ 6 When a fixed image (e.g.
PREPERATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. PREPARATION Owner’s Manual CD Manual Power Cord Protective Bracket and Bolt for Power Cord (Refer to P.12) (This feature is not available for all models.) * Wipe spots on the exterior only with the polishing cloth. Option Extras * Do not wipe roughly when removing stains.
PREPARATION FRONT PANEL INFORMATION ■ Image shown may differ from your TV. ■ NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it). PREPARATION CH CHANNEL(+, -) Buttons VOL VOLUME (+, -) Buttons ENTER ENTER Button MENU MENU Button 22LG3DDH Power/Standby Indicator Illuminates red in standby mode. Illuminates green when the set is switched on.
BACK PANEL INFORMATION ■ Image shown may differ from your TV. R PREPARATION For 26/32LG3DDH ANTENNA IN R H/P 11 VIDEO L/MONO AUDIO R 12 M.P.I.
PILLOW NORMAL SPEAKER SPEAKER SPEAKER SWITCH PREPARATION USB IN REMOTE SERVUCE ONLY CONTROL OUT VIDEO RS-232C IN (SERVICE ONLY) For 22LG3DDH ANTENNA IN M.P.I. 12 2 PILLOW SPEAKER 5 HDMI/DVI IN (MONO) AUDIO 15 PILLOW NORMAL SPEAKER SPEAKER SPEAKER SWITCH VIDEO RS-232C( IN) (SERVICE ONLY) 15 4 AV IN DVI AUDIO IN PREPARATION 14 13 USB IN REMOTE SERVUCE ONLY CONTROL OUT RESET UPDATE 1 9 3 1 2 HDMI/DVI IN Digital Connection. Supports HD video and Digital audio.
PROTECTION COVER (For 26/32LG3DDH) ■ Image shown may differ from your TV. PREPARATION After removing the stand, install the included p r o t e c t i o n c o v e r over the hole for the stand. Press the P R O T E C T I O N C O V E R into the TV until you hear it click.
PREPARATION CABLE MANAGEMENT ■ Image shown may differ from your TV. For 26/32LG3DDH PREPARATION 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the PROTECTIVE BRACKET and the screw as shown. It will help prevent the power cable from being removed by accident. PROTECTIVE BRACKET (This feature is not available for all models.) 2 For 22LG3DDH 1 Connect the cables as necessary.
DESKTOP PEDESTAL INSTALLATION ■ Image shown may differ from your TV. * This feature is not available for all models. 4 inches 4 inches 4 inches 4 inches PREPARATION For proper ventilation, allow a clearance of 4 inches on all four sides. 4 inches CAUTION G Ensure adequate ventilation by following the clearance recommendations. G Do not mount near or above any type of heat source. KENSINGTON SECURITY SYSTEM ■ This feature is not available for all models.
PREPARATION VESA WALL MOUNTING PREPARATION Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer.
SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND ■ We recommend that you set the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV. ■ PREPARATION You should purchase necessary components to prevent TV from falling off of the stand.
PREPARATION ■ To prevent damage do not connect to the power outlet until all connections are made between the devices. ANTENNA OR CABLE CONNECTION PREPARATION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connection. For optimum picture quality, adjust the direction if needed.
EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ This part of EXTERNAL EQUIPMENT SETUP mainly uses the picture for 32LG3DDH model. ■ HD RECEIVER SETUP This TV can receive Digital Over-the-air or Digital Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. 1.
EXTERNAL EQUIPMENT SETUP HDMI Connection 1. How to connect UPDATE Connect the digital set-top box to H D M I / D V I I N jack on the TV. 2 No separate audio connection is necessary. HDMI supports both audio and video. USB IN SERVICE ONLY HDMI/DVI IN (MONO) VIDEO AV IN 1 AUDIO COMPONENT IN EXTERNAL EQUIPMENT SETUP 1 2. How to use ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
(SERVICE ONLY) ( RGB IN (PC) ) SPEA REMOTE CONTROL OUT AUDIO IN (RGB/DVI) DVI to HDMI Connection 26/32LG3DDH 1. How to connect UPDATE HDMI/DVI IN USB IN SERVICE ONLY COMPONENT IN Connect the audio output of the digital set-top box to the A U D I O I N ( R G B / D V I ) or A V I N A U D I O jack on the TV. 2 (MONO) RGB IN (PC) VIDEO AV IN 1 AUDIO RS-232C IN (SERVICE ONLY) 1 AUDIO IN (RGB/DVI) AUDIO VIDEO 2. How to use 2 Turn on the digital set-top box.
EXTERNAL EQUIPMENT SETUP DVD SETUP Component Connection (Except 22LG3DDH) 1. How to connect 2 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). Y PB PR L Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the TV. HDMI/DVI IN 2. How to use ■ ■ Turn on the DVD player, insert a DVD.
RS-232C IN (SERVICE ONLY) ( RGB IN (PC) ) AUDIO IN (RGB/DVI) CO HDMI Connection 1. How to connect UPDATE 2. How to use ■ ■ Select the HDMI input source on the TV using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions. AUDIO USB IN SERVUCE ONLY (MONO) VIDEO AV IN 1 No separate audio connection is necessary. HDMI supports both audio and video.
EXTERNAL EQUIPMENT SETUP VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all TVs and is not covered by warranty. ■ EXTERNAL EQUIPMENT SETUP Antenna Connection 1. How to connect 1 2 Connect the RF antenna out socket of the VCR to the A N T E N N A I N socket on the TV.
Composite (RCA) Connection V I D E O jacks between TV and Connect the A U D I O/V VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) AV IN IN 11 AV 1 AUDIO ( MONO ) AUDIO VIDEO 2. How to use ■ RGB IN (P VIDEO AUDIO (RGB/ 1 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select the A V or A V 1 input source on the TV using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 26/32LG3DDH 1. How to connect 1 Camcorder Video Game Set VIDEO L R 2. How to use ■ ■ H/P Select the A V 2 input source on the TV using the I N P U T button on the remote control. (Except 22LG3DDH) If connected to A V I N or A V I N 1 input, select the A V or A V 1 input source on the TV. Operate the corresponding external equipment.
PILLOW SPEAKER SETUP ■ Connect a pillow speaker to the LCD TV/Monitor. 1. How to connect PILLOW SPEAKER Connect an accessory pillow speaker or wired remote control unit to this 6-pin jack. 3 Select P I L L O W S P E A K E R on the rear panel of the TV. PILLOW SPEAKER Use a pillow speaker that is a UL recognized pendant control bearing the warning: “Risk of fire if used in oxygen enriched atmosphere. Keep pendant control away from oxygen equipment.
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection (Except 22LG3DDH) ( NO) RGB IN (PC) VIDEO 1. How to connect EXTERNAL EQUIPMENT SETUP 1 Connect the VGA output of the PC to the R G B I N( P C) jack on the TV. 2 Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. AUDIO IN (RGB/DVI) AUDIO 1 2. How to use ■ ■ 2 Turn on the PC and the TV.
26/32LG3DDH DVI to HDMI Connection UPDATE 1. How to connect HDMI/DVI IN Connect the PC audio output to the A U D I O I N ( R G B / D V I ) or A V I N A U D I O jack on the TV. AV IN 1 2 RGB IN (PC) VIDEO AUDIO (MONO) COMPONENT IN Connect the DVI output of the PC to the H D M I / D V I I N jack on the TV. 1 2. How to use Turn on the PC and the TV. Select the HDMI input source on the TV using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode (Except 22LG3DDH) Selecting Resolution You can choose the resolution in RGB-PC mode. The P o s i t i o n, P h a s e, and S i z e can also be adjusted. EXTERNAL EQUIPMENT SETUP PICTURE Move Screen Enter E Resolution • Contrast 90 • Brightness 50 • Sharpness 70 • Color 60 • Tint 0 Auto Config. Position R G • Advanced Control • Picture Reset Phase Screen (RGB-PC) Reset 1 MENU 2 Select P I C T U R E.
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. Returns P o s i t i o n, S i z e, and P h a s e to the default factory settings. This feature operates only in RGB-PC mode. PICTURE Move Screen Enter E • Contrast 90 • Brightness 50 • Sharpness 70 • Color 60 • Tint 0 Move Prev.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase PICTURE Move Screen Enter E EXTERNAL EQUIPMENT SETUP If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. Move Prev. Resolution • Contrast 90 • Brightness 50 • Sharpness 70 • Color 60 Auto config.
WATCHING TV / CHANNEL CONTROL TURNING ON TV First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the button on the TV or press the POWER button on the remote control. 2 Select the viewing source by using the INPUT button on the remote control. 3 When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
WATCHING TV / CHANNEL CONTROL INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus. Selecting Menu Mode Installer Menu Wizard 1 Select Menu Mode ENTER Which menu mode will you be using? Select the desired menu mode.
Step3. Pillow Speaker Installer Menu Wizard 1 G 2 G 3 G 4 G 5 G 6 G 7 6 Step3. Pillow Speaker Select P i l l o w S p e a k e r C o d e. Which brand pillow speaker code will you be using? Zenith code Exit Script F 7 G G ENTER Select N e x t. OK PTC: V1.00.006 CPU: V01.17.00 FPGA: 20E7 Exit Express Script Step4. Channel Access Installer Menu Wizard 1 G 2 G 3 G 4 G 5 G 6 G 7 8 Step4. Channel Access Select Y e s or N o.
WATCHING TV / CHANNEL CONTROL ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run this function if you change your residence or move the TV. Also, make sure to run this function with the antenna connected during TV broadcasting hours. Auto Tuning memorizes only the channels available at the time.
WATCHING TV / CHANNEL CONTROL Add/Delete Channel (Manual Tuning) If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CHANNEL Move Enter Move WATCHING TV / CHANNEL CONTROL Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Channel Label Channel Label Enter DIGITAL F G Select channel type and RF-channel number.
Channel Editing The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue. When a channel number is deleted, it means that you will be unable to select it using CH button during TV viewing. If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select it in the C h a n n e l E d i t menu. Move Enter Auto Tuning Manual Tuning Channel Edit Channel Label Ch.
WATCHING TV / CHANNEL CONTROL CHANNEL LABEL Choose preset labels for your channels. If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel even if you didn't preset a label for the channel. CHANNEL Move Enter WATCHING TV / CHANNEL CONTROL Auto Tuning Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Channel Label Channel Label Move Enter DIGITAL 2-1 Channel Logo F Disney Close 1 MENU 2 Select C H A N N E L.
INPUT LIST TV ENTER INPUT For 26/32LG3DDH Component RGB Select the desired input source. TV AV1 HDMI For 22LG3DDH AV2 RGB TV AV2 Component AV WATCHING TV / CHANNEL CONTROL 1 AV1 HDMI ■ ■ ■ ■ ■ T V: Select it to watch over-the-air, cable and digital cable broadcasts. A V: Select them to watch a VCR or other external equipment. C o m p o n e n t : Select them to watch DVD or a Digital set-top box. R G B: Select it to view PC input.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. ■ RGB-PC input source use 4:3 or 16:9 aspect ratio. 16:9 PICTURE CONTROL 1 RATIO 2 Press the R A T I O button repeatedly to select the picture options : S e t B y P r o g r a m , 4 : 3 , 1 6 : 9 , Z o o m , J u s t S c a n. Return to TV viewing. RETURN ■ 40 You can also adjust A s p e c t R a t i o in the PICTURE menu.
Set by program Zoom Selects the proper picture proportion to match the source’s image. Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. (4:3 4:3) Set By Program (16:9 16:9) Set By Program 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video.
PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode - Preset There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually.
MANUAL PICTURE ADJUSTMENT - USER MODE Adjust the picture appearance to suit your preference and viewing situations. PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard 90 • Brightness 50 • Sharpness 70 • Color 60 • Tint 0 • Backlight 80 E R E E 70 • Contrast E • Backlight Enter G E MENU 2 3 Select P I C T U R E. ENTER Select P i c t u r e M o d e. ENTER Select V i v i d, S t a n d a r d, N a t u r a l, C i n e m a, S p o r t or G a m e.
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY Dynamic Contrast: Optimizes the contrast automatically according to the brightness of the reflection. Dynamic Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors. Noise Reduction: Removes interference up to the point where it does not damage the original picture. Gamma: High gamma values display whitish images and low gamma values display high contrast images.
Color Temperature Dynamic Contrast ■ Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish. ■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. ■ Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid.
PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move Enter PICTURE Move E E • Contrast ? 90 • Brightness 50 All picture settings will be reset. 70 Continue?• Sharpness • Color Yes • Tint 60 0 No R G i PICTURE CONTROL Select P I C T U R E. MENU 2 3 4 ENTER Select P i c t u r e R e s e t. ENTER Select Y e s. ENTER 5 Return to TV viewing. MENU 46 Initialize the adjusted value.
DEMO MODE Displays a slide show to explain the various feature of this TV. OPTION Move Enter OPTION Move Enter : English Menu Language Audio Language : English Audio Language : English Caption : Off Caption : Off Set ID :1 Set ID :1 Demo Mode : Off Demo Mode : Off Off Menu Language : English On MENU Select O P T I O N. 2 ENTER 3 ENTER 4 MENU Select D e m o M o d e. Select O n to show the various feature of the TV. PICTURE CONTROL 1 Return to TV viewing.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.
CLEAR VOICE I I By differentiating the human sound range from others, it improves the sound quality of voices. AUDIO Move Auto Volume : Off Clear Voice II : On • Level Balance Sound Mode AUDIO Enter 0 - + 0 L R : Standard 2 Off • Level 0On - + 0 R Balance • Infinite Sound : Off 50 • Treble 50 • Bass 50 • Bass 50 Select A U D I O. ENTER Select O n or O f f. 3 Adjustment for Clear Voice Level With selecting O n ENTER Select L e v e l. ENTER Make appropriate adjustments.
SOUND &LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Auto Volume Clear Voice I Move Balance Clear Voice I 0 - + 0 L R SOUND & LANGUAGE CONTROL 3 50 - • Infinite Sound : Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 ENTER Select B a l a n c e. ENTER Make appropriate adjustments. 4 MENU 0 0 L Balance : : Standard • Infinite Sound : Off Select A U D I O. RETURN Balance Return to the previous menu.
PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content.
SOUND &LANGUAGE CONTROL SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations.
TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. (Except Pillow Speaker, Speaker out 8Ω) In A V, C o m p o n e n t, R G B and H D M I with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system or a Infinite System, turn off the TV’s internal speakers.
SOUND &LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Clear Voice I Move Clear Voice I • Level Balance Sound Mode SOUND & LANGUAGE CONTROL 54 3 - + L R 50 • Treble 50 50 • Bass 50 Select R e s e t. Initialize the adjusted value. Return to TV viewing. Sound Mode 0 0 • Bass 4 MENU • Level Balance • Treble Select A U D I O. ENTER + R Enter : Standard i Resetting audio configuration...
STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. MONO 1 SAP Each time you press the S A P button, M o n o, S t e r e o, or S A P appear in turn. 2 RETURN Return to TV viewing. ■ If other languages available on the digital signal, select them with the S A P button.
SOUND &LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV mode. OPTION 1 Enter SOUND & LANGUAGE CONTROL 2 Move Enter Menu Language : English Audio Language : English Audio Language Caption : Off Caption : English English : Off Set ID :1 Set ID : 1Spanish Demo Mode : Off Demo Mode French : Off Select O P T I O N. ENTER Select A u d i o L a n g u a g e.
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. OPTION Enter 3 Audio Language : English Audio Language Caption : Off Caption Set ID :1 Set ID Demo Mode : Off Demo Mode : Off ENTER Select M e n u L a n g u a g e. ENTER Select your desired language. From this point on, the on-screen menus will be shown in the selected language. 4 MENU Enter : English English : English Español : Off : 1 Français Select O P T I O N.
SOUND &LANGUAGE CONTROL CAPTION MODE Caption must be provided to help people with hearing loss watch TV. This feature operates only in TV, AV1-2 mode. 1 CC ■ Select Caption O n or O f f. When selecting O f f, Sub-menus for Analog, DTV, and Digital Option become disabled. Analog Broadcasting System Captions Captions provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program.
Digital Broadcasting System Captions Choose the language you want the DTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On.
SOUND &LANGUAGE CONTROL Caption Option Customize the DTV captions that appear on your screen. This function in only available when Caption Mode is set On.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
TIME SETTING Manual Clock Setup If the current time setting is wrong, set the clock manually. TIME Move Enter Clock TIME Move Enter F Clock Manual : Off Off Time : Off Year On Time : Off On Time : Off Month 2 Date 21 Hour 2 AM Sleep Timer : Off Sleep Timer : Off 2008 Minute 10 Eastern Time Zone Daylight Saving Auto Close TIME SETTING 1 Select T I M E. MENU 2 3 ENTER Select C l o c k. ENTER Select M a n u a l. 4 Select the Year, Month, Date, Hour, or Minute option.
AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The O f f T i m e function overrides the O n T i m e function if they are both set to the same time. The TV must be in standby mode for the O n T i m e to work. TIME Move Enter Clock TIME Move Enter Clock Off Time : Off Off Time : Off On Time : Off On Time : 6:30 Sleep Timer : Off Sleep Timer : Off Feb. 21, 2010 12:07 AM Repeat F Hour Once G 6 AM Minute 30 Close 1 Select T I M E.
PARENTAL CONTROL /RATINGS SLEEP TIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. 1 TIMER Press the T I M E R button repeatedly to select the number of minutes. Sleep timer options: Off, 10, 20, 30, 60, 90, 120, 180, and 240 minutes. 2 RETURN Return to TV viewing. You can also adjust S l e e p T i m e r in the T I M E menu.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
PARENTAL CONTROL /RATINGS Lock System Enables or disables the blocking scheme you set up previously. LOCK Move Lock System 1 : Off Enter LOCK Move Lock System : On Set Password Set Password Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER Enter Off On Select L O C K.
Set Password Change the password by inputting a new password twice. LOCK Move Lock System 1 Enter : Off LOCK Lock System Set Password Set Password Block Channel Block Channel Move Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER Enter : Off New * * * * Confirm * * * * Close Select L O C K.
PARENTAL CONTROL /RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. LOCK Move Lock System Enter : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Ch. Change Navigation CH Page Change CC 1 ENTER Select L O C K. MENU 2 1 ABC 3 DEF GHI 5 JKL 6 MNO PQRS 8 TUV 9 0 &@ .:/, 4 7 2 PARENTAL CONTROL / RATING 3 4 Select B l o c k C h a n n e l.
MOVIE & TV RATING Movie Rating (MPAA) Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
PARENTAL CONTROL /RATINGS TV Rating Children Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
TV Rating General Based on the ratings, blocks certain TV programs that you and your family do not want to view. LOCK Move Lock System Enter : Off LOCK Move Lock System Enter : Off Set Password Set Password Block Channel Block Channel Age Movie Rating Movie Rating Dialogue TV Rating-Children TV Rating-Children Language TV Rating-General TV Rating-General Sex Downloadable Rating Downloadable Rating Violence Input Block Input Block Close 1 ENTER Select L O C K.
PARENTAL CONTROL /RATINGS DOWNLOADABLE RATING This function operates only when TV has received Region5 Rating data.
EXTERNAL INPUT BLOCKING Enables you to block an input.
APPENDIX APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries. ■ The remote control doesn’t work *This feature is not available for all models.
The audio does not work. Press the VOL or VOLUME button. Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ ■ Picture OK & No sound No output from one of the speakers ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. ■ Check High Speed HDMI cable.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS MODEL Dimensions (Width x Height x Depth) Weight Power requirement Television System Program Coverage External Antenna Impedance Environment condition ■ 22LG3DDH (22LG3DDH-UA) 26LG3DDH (26LG3DDH-UA) 32LG3DDH (32LG3DDH-UA) 528 x 387.3 x 82.7 mm 20.7 x 15.2 x 3.2 inches 663.3 x 449.8 x 105.0 mm 26.1 x 17.6 x 4.1 inches 801.8 x 544.4 x 109 mm 31.5 x 21.4 x 4.2 inches 6.2kg / 13.6 lbs 8.1 kg / 17.8 lbs 11.9 kg / 26.
OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part there of, to be licensed as a whole at no charge to all third parties under the terms of this license.
APPENDIX 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license.
END OF TERMS AND CONDITIONS How to apply these terms to your new programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program.
GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this license and to the absence of any warranty; and distribute a copy of this license along with the Library.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.
For an executable, the required form of the "work that uses the library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
If the library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14.If you wish to incorporate parts of the library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this.
MOZILLA PUBLIC LICENSE Version 1.1 --------------code which is described in the source code notice required by exhibit as original code, and which, at the time of its release under this license is not already covered code governed by this license. 1.Definitions. 1.0.1. “Commercial use” means distribution or otherwise making the covered code available to a third party. 1.1. “Contributor” means each entity that creates or contributes to the creation of modifications. 1.2.
(c) the licenses granted in this section 2.1(a) and (b) are effective on the date Initial developer first distributes original code under the terms of this license. (d) Notwithstanding section 2.1(b) above, no patent license is granted: 1) for code that You delete from the original Code; 2) separate from the original code; or 3) for infringements caused by: i) the modification of the original code or ii) the combination of the original code with other software or devices. 2.2. 3. Distribution Obligations.
3.5. 3.6. (c) Representations. contributor represents that, except as disclosed pursuant to section 3.4(a) above, contributor believes that contributor's modifications are contributor's original creation(s) and/or contributor has sufficient rights to grant the rights conveyed by this license. 3.7. Required notices. You must duplicate the notice in exhibit A in each file of the source code.
7. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU.
11. MISCELLANEOUS. This license represents the complete agreement concerning subject matter hereof. If any provision of this license is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions.
OWNER’S MANUAL LCD TV Please read this manual carefully before operating your set and retain it for future reference. 22LG3DDH 26LG3DDH 32LG3DDH The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL P/NO : SAC34026007 (1005-REV00) www.lg.