QUICK REFERENCE GUIDE LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. 22LT560C 26LT560C 32LT560C 37LT560C 42LT560C 32LT560E 37LT560E 42LT560E 47LT560E P/NO : MFL67415402 (1208-REV05) 55LS460E www.lgsolutions.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. yy TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on yy or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified yy by the manufacturer. Use only with a cart, stand, tripod, bracket, yy or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
IMPORTANT SAFETY INSTRUCTIONS Warning - To reduce the risk of fire or yy electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. Do not expose to dripping or splashing and yy do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
IMPORTANT SAFETY INSTRUCTIONS If you smell smoke or other odors coming yy from the TV, unplug the power cord and contact an authorized service center. Do not press strongly upon the panel with a yy Supply hand or a sharp objectShort-circuit such as aPower nail, pencil Breaker or pen, or make a scratch on it. Keep the product away from direct sunlight. yy If the TV feels cold to the touch, there may yy be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV.
LICENSES / OPEN SOURCE SOFTWARE NOTICE LICENSES Supported licenses may differ by model. For more information about licenses, 'visit www.lg.com'. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
TABLE OF CONTENTS 7 TABLE OF CONTENTS 2 IMPORTANT SAFETY INSTRUCTIONS 24 GENERAL TROUBLESHOOTING 6 LICENSES 24 CAUTION for using ezsign 2.
ASSEMBLING AND PREPARING INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
ASSEMBLING AND PREPARING 9 For LT560C series ENERGY AV MODE INPUT TV SAVING 1 2 4 5 7 8 9 0 FLASHBK LIST 3 6 MARK FAV VOL 3D CH P A G E MUTE MENU INFO Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Quick Reference Guide Power Cord (For 32/37/42LT560C) (For 22LT560C) (For 26LT560C) Stand body/Stand base (See p.14) Stand body/Stand base (See p.15) Stand body/Stand base (See p.15) (For 32/37/42LT560C) (For 22LT560C) (For 26LT560C) Stand Screws 8 EA, M4 x 14 (See p.
ASSEMBLING AND PREPARING For LT560E series ENERGY AV MODE INPUT TV SAVING 1 2 3 4 5 7 8 9 0 FLASHBK LIST 6 MARK FAV VOL 3D CH P A G E MUTE MENU INFO Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Quick Reference Guide EzSign 2.0 Editor CD Power Cord Stand body/Stand base (See p.14) Stand Screws 8 EA, M4 x 14 (See p.14) Desk-mount Screw (See p.17) Protection cover Power Cord holder (See p.20) Cable holder (See p.20) ENGLISH ENG Remote control, Batteries (AAA) (See p.
ASSEMBLING AND PREPARING 11 For LS460E series ENERGY AV MODE INPUT TV SAVING 1 2 3 4 5 7 8 9 0 FLASHBK LIST 6 MARK FAV VOL 3D CH P A G E MUTE MENU INFO Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Quick Reference Guide EzSign 2.0 Editor CD Power Cord Stand body/Stand base (See p.16) Stand Screws 8 EA, M4 x 20 (See p.16) Wall Mount Inner Spacers 4 EA (See p.19) Cable holder (See p.
ASSEMBLING AND PREPARING Parts and buttons For LT560C, LT560E series Remote control Power indicator Side Connection panel HDMI input USB IN Buttons (For 22/26LT560C) IN 3 USB input Screen Buttons (For 32/37/42LT560C, 32/37/42/47LT560E) Speakers DC IN / DVI IN 1 2 R EXTERNAL SPEAKER OUT Rear Connection panel L RS-232C IN (CONTROL & SERVICE) L/MONO -AUDIO- R (For 22/26LT560C) AV IN VIDEO ENGLISH ENG RGB IN (PC) ANTENNA/ CABLE IN RJP INTERFACE AUDIO IN (RGB/DVI) Button Descript
ASSEMBLING AND PREPARING 13 For LS460E series Screen Side Connection panel USB IN USB input 3 IN HDMI input Remote control and intelligent1 sensors Power indicator OK AV IN RGB IN (PC) SETTINGS INPUT VIDEO 2 -AUDIO- R 1 L/MONO / DVI IN R EXTERNAL SPEAKER OUT L RS-232C IN (CONTROL & SERVICE) ANTENNA/ CABLE IN RJP INTERFACE Rear Connection panel Touch buttons2 AUDIO IN (RGB DVI) Touch button Description /I Turns the power on or off. INPUT Changes the input source.
ASSEMBLING AND PREPARING Setting up the TV Put your TV on a pedestal stand and mount the TV on a table or wall. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. (For 32/37/42LT560C, 32/37/42/47LT560E) 1 4 EA 2 M4 x 14 Stand Body Front Stand Base Caution ENGLISH ENG When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
ASSEMBLING AND PREPARING 15 (For 22/26LT560C) 1 2 4 EA M4 x 12 Stand Body M4X20 Front CAUTION Stand Base Top View When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 3 M4 x 16 (For 22LT560C) 4 EA M4 x 12 (For 26LT560C) Caution Make sure that the screws are fastened yy completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.
ASSEMBLING AND PREPARING (For 55LS460E) 1 4 EA Stand Body 2 M4 x 20 Front Stand Base Top View Caution When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. ENGLISH ENG 3 4 EA M4 x 20 Caution Note Remove the stand before installing the TV yy on a wall mount by performing the stand attachment in reverse. Make sure that the screws are fastened yy completely.
ASSEMBLING AND PREPARING Mounting on a table 17 Adjusting the angle of the TV to suit view 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation. (For 32/37/42LT560C, 32/37/42/47LT560E) Swivel 90±4 degrees to the left or right and adjust the angle of the TV to suit your view. 90˚ 90˚ 10 cm 10 cm 10 cm 10 cm (For 55LS460E) Swivel 20±2 degrees to the left or right and adjust the angle of the TV to suit your view.
ASSEMBLING AND PREPARING Attaching the TV to a desk The TV should be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. (For 32/37/42LT560C, 32/37/42/47LT560E, 55LS460E) 4-Screws (Not provided as parts of the product) Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.
ASSEMBLING AND PREPARING Caution Disconnect the power first, and then move yy or install the TV. Otherwise electric shock may occur. If you install the TV on a ceiling or slanted yy wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. Do not over tighten the screws as this may yy cause damage to the TV and void your warranty. Only use screws and wall mounts that meet yy the VESA standard.
ASSEMBLING AND PREPARING Tidying cables For 32/37/42LT560C, 32/37/42/47LT560E 1 Install the power cord holder and power cord. It will help prevent the power cable from being removed by accident. For 55LS460E 1 Gather and bind the cables with the cable holder. Cable holder Power cord holder 2 Gather and bind the cables with the cable holder. ENGLISH ENG Cable holder For 22/26LT560C 1 Gather and bind the cables with the cable holder.
ASSEMBLING AND PREPARING 21 External Speaker Out Connect the external speaker.
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control.
REMOTE CONTROL 23 VOL Adjusts the volume level. CC, CHAR/NUM CC: Selects a closed caption. CHAR/NUM: Switches between Letter and Number input modes. TIMER Turns the TV off in a set amount of time. Q.MENU , DELETE MUTE MUTE: Mutes all sounds. DELETE: Deletes letters and numbers. INPUT TV 1 4 7 DVD .,;@ ghi pqrs 2 5 8 MARK abc jkl tuv 0 3 6 9 ^ CH v, PAGE CH: Scrolls through the saved channels. PAGE: Moves to the previous or next screen.
GENERAL TROUBLESHOOTING / CAUTION FOR USING EZSIGN 2.0 GENERAL TROUBLESHOOTING Display Panel Picture Symptom No picture. Possible Cause(s) Display panel is turned off. yy Antenna/cable not connected. yy Connections incorrect. yy MPI not connected yy Encrypted program. yy Wrong tuning band. yy Possible Solution(s) Turn TV ON. yy Power failure? yy Connect antenna/cable signal to TV. yy Check connections on TV. yy If applicable, connect MPI cable to MPI device. yy Try another channel.
SPECIFICATIONS 25 SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions.
SPECIFICATIONS 55LS460E (55LS460E-UA) MODELS Dimensions (W x H x D) Weight With stand 1,263.0 mm x 822.0 mm x 315.0 mm (49.7 inch x 32.4 inch x 12.4 inch) Without stand 1,263.0 mm x 754.0 mm x 35.5 mm (49.7 inch x 29.7 inch x 1.4 inch) With stand 25.5 Kg (56.2 lbs) Without stand 21.9 Kg (48.3 lbs) RGB(PC), HDMI (PC) supported mode Resolution Horizontal Vertical Frequency (KHz) Frequency (Hz) ENGLISH ENG 720x400 31.46 70.08 640x480 31.46 59.94 800x600 37.87 60.31 1024x768 48.
EXTERNAL CONTROL DEVICE SETUP 27 EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Type of connector; D-Sub 9-Pin Male 1 5 6 9 RS-232C IN (CONTROL & SERVICE) RS-232C IN (CONTROL & SERVICE) No.
EXTERNAL CONTROL DEVICE SETUP RS-232C configurations Set ID Set ID number. 7-Wire Configuration (Serial female-female NULL modem cable) OPTION 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DSR DSR 6 4 DTR RTS 7 8 CTS CTS 8 7 RTS D-Sub 9 : On • My Media Setting • Set ID :1 • Mode Setting : Home Use ꔉ 1 Press Home or MENU to access the main menus. 2 Press the Navigation buttons to scroll to 3 Press the Navigation buttons to scroll to Set ID and press ENTER.
EXTERNAL CONTROL DEVICE SETUP 29 Communication Parameters Stop bit: 1 bit yy Communication code: ASCII code yy Use a crossed (reverse) cable. yy Baud rate: 9600 bps (UART) yy Data length: 8 bits yy Parity : None yy Command reference list 01. Power COMMAND1 COMMAND2 DATA (Hexadecimal) k a 00 - 01 COMMAND1 COMMAND2 DATA (Hexadecimal) 14. Treble k r 00 - 64 b (See p.31) 15. Bass k s 00 - 64 k c (See p.31) 16. Balance k t 00 - 64 04. Screen Mute k d 00 - 01 17.
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the set.(j, k, m or x) [Command 2] : Second command to control the set. [Set ID] : You can adjust the set ID to choose desired set ID number in Option menu. Adjustment range is 1~ 99. When selecting Set ID ‘0’, every connected the set is controlled.
EXTERNAL CONTROL DEVICE SETUP 01. Power (Command: k a) To control Power On/Off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. * Note: In this model, set will send the Acknowledge after power on processing completion.
EXTERNAL CONTROL DEVICE SETUP 12. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00: OSD off Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 13. Remote Control Lock Mode (Command: k m) To lock the remote control and the front panel controls on the set.
EXTERNAL CONTROL DEVICE SETUP 20. Energy Saving (Command: j q) To control the energy saving function. Transmission [ j ][q][ ][Set ID][ ][Data][Cr] Data 00: off 01: Minimum 02: Medium 03: Maximum 04: Auto/Intelligent sensor (depending on model) 05: Screen off Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x] 21. Auto Configuration (Command: j u) To adjust picture position and minimize image shaking automatically. Auto configuration only works in RGB-PC mode.
EXTERNAL CONTROL DEVICE SETUP * Table List (Channel Tuning) 7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical Channel 4 Reserved 3 2 1 0 Step 0 Main 0 Two 0 Use x 0 0 0 0 NTSC Air 1 Sub 1 One 1 No Use x 0 0 0 1 NTSC Cable x 0 0 1 0 ATSC Air x 0 0 1 1 ATSC Cable_std x 0 1 0 0 ATSC Cable_hrc x 0 1 0 1 ATSC Cable_irc x 0 1 1 0 ATSC cable_auto x 0 1 1 1 Reserved x x x x x ...
CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE yy The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.
The model and serial numbers of the TV are located on the back and/or one side of the TV. Record them below should you ever need service. MODEL SERIAL Pro:Centric is a trademark of LG Electronics U.S.A., Inc.(For LT560C series) All other trademarks or registered trademarks are the property of their respective owners. LG Customer Information Center For inquires or comments, visit www.lg.
