Owner's Manual IPS LED MONITOR (LED MONITOR*) *LG LED Monitors are LCD Monitors with LED Backlighting. Please read this manual carefully before operating your set and retain it for future reference. IPS LED MONITOR MODEL 22MP57A 22MP57D 22MP57HQ 22MP57VQ 22MC57HQ 23MP57A 23MP57D 23MP57H 23MP57HQ 23MP57VQ 24MP57D 27MP57HQ 24MP57HQ 27MP57VQ 24MP57VQ 27MP57HT 24MC57HQ www.lg.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
2 TABLE OF CONTENTS ENGLISH CONTENTS 3 LICENSE 26 - -General 27 - -Auto Configuration 28 - -Reset 29 - -Picture mode 30 TROUBLESHOOTING 4 ASSEMBLING AND PREPARING 4 Unpacking 6 Parts and buttons 7 - How to Use the Joystick Button 8 Moving and Lifting the Monitor 32 SPECIFICATIONS 9 Setting up the Monitor set 9 - Attaching the Stand Base 40 Preset Modes (Resolution) 9 - Detaching the Stand Base 40 Indicator 10 - Mounting on a table 11 - Using the cable holder 41 PRO
LICENSE 3 22MP57HQ 22MP57VQ 22MC57HQ 23MP57H 23MP57HQ 23MP57VQ 24MP57HQ 24MP57VQ 24MC57HQ 27MP57HQ 27MP57VQ 27MP57HT ENG ENGLISH LICENSE Each model has different licenses. Visit www.lg.com for more information on the license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
4 ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING ENGLISH ENG Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card D-SUB Cable ( This cable is not included in all countries. ) DVI-D Cable ( This cable is not included in all countries.
ASSEMBLING AND PREPARING 5 CAUTION NOTE The accessories supplied with your product may vary depending on the model. yy Product specifications or contents in this manual may be changed without prior notice due to upgrade yy of product functions. ENG ENGLISH Do not use any unapproved accessories to ensure the safety and product life span. yy Any damages or injuries by using unapproved accessories are not covered by the warranty.
6 ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator y yOn: power is on y yOff: power is off (Joystick Button) Connection panel (See p.14~16) NOTE The joystick button is located at the bottom of the monitor.
ASSEMBLING AND PREPARING 7 You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger. Basic Functions ◄/► Power on Press the joystick button once with your finger to turn on the monitor. Power off Press and hold the joystick button once with your finger to turn off the monitor. Volume Control You can control the volume by moving the joystick button left/right.
8 ASSEMBLING AND PREPARING Moving and Lifting the Monitor ENGLISH ENG When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation regardless of its shape or size. It is advisable to place the monitor in the yy original box or packing material before attempting to move it. Before moving or lifting the monitor, disconyy nect the power cord and all cables. Hold the top and bottom of the monitor frame yy firmly.
ASSEMBLING AND PREPARING Setting up the Monitor set 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Detaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 2 1 Turn the screw to the left. 2 Pull out the Stand Base. 3 Pull out the Stand Body from the monitor set. 4 Separate the Cable Holder. CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.
10 ASSEMBLING AND PREPARING CAUTION ENGLISH ENG y yIllustrations in this document represent typical procedures, so they may look different from the actual product. y yDo not carry the monitor upside down by just holding the stand base. This may cause the monitor to fall off the stand and could result in personal injury. y yWhen lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen may cause damage to it.
ASSEMBLING AND PREPARING 3 Press the joystick button on the bottom of the When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. Using the cable holder Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture.
12 ASSEMBLING AND PREPARING Using the Kensington security system NOTE ENGLISH ENG 22MP57A 23MP57A 24MP57D 22MP57D 23MP57D 24MP57HQ 22MP57HQ 23MP57H 24MP57VQ 22MP57VQ 23MP57HQ 24MC57HQ 22MC57HQ 23MP57VQ Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. Front The Kensington security system connector is located at the back of the Monitor set.
ASSEMBLING AND PREPARING Mounting on a wall Wall Mount (A x B) yy 10 cm 10 cm 10 cm 10 cm If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 If you use screw longer than standard, the monitor might be damaged internally. If you use improper screw, the product might be damaged and drop from mounted position.
14 USING THE MONITOR SET USING THE MONITOR SET ENGLISH Connecting to a PC Your Monitor set supports Plug & Play*. yy *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. DVI-D connection Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations. D-SUB connection Transmits analog video from your PC to the Monitor set.
USING THE MONITOR SET CAUTION Connecting to AV Devices HDMI connection Transmits the digital video and audio signals from your AV devices to the monitor. Connect your AV device to the monitor with the HDMI cable as illustrated below. NOTE When you want to use two PC in our Monitor, yy please connect the signal cable(D-SUB/ DVI-D/HDMI) respectively in Monitor set. If you turn the Monitor set on while it is cold, yy the screen may flicker. This is normal.
16 USING THE MONITOR SET Connecting to External Devices ENGLISH Peripheral device connection Connect peripheral devices to the monitor using headphone ports. (sold separately) NOTE Peripheral devices are sold separately. yy Cables with angled plugs may have clearyy ance issues, use straight plugs when possible. Angle Type Straight Type NOTE Headphones or speakers may not work noryy mally, depending on the server PC settings.
INSTALLING LG MONITOR SOFTWARE 17 INSTALLING THE LG MONITOR SOFTWARE Insert the the owner's manual CD included in the product package into your PC's CD driver and install the Screen Split. 1 Set the default Web browser to Internet Explorer. 2 Click the "Screen Split " on the CD's main screen. When the file download window appears, click the Run button. (The file download window may vary depending on the operating system and the Internet Explorer version, but the installation procedures are same.
18 INSTALLING LG MONITOR SOFTWARE 5 The Screen Split installation starts as shown ENGLISH ENG below. NOTE Screen Split: This program automatically yy splits the program window as desired. Monitor Selection only supported in extend display. This program supported Windows 7 & Windows 8. 6 When the installation is complete, restart your system. NOTE If you run Screen Split, the Screen Split icon [ ] appears in the system tray at the right bottom of the PC screen.
INSTALLING LG MONITOR SOFTWARE 19 Installing The LG Color Cloning 1 Set the default Web browser to Internet Explorer. 2 Click the "LG Color Cloning" on the CD's main screen. When the file download window appears, click the Run button. (The file download window may vary depending on the operating system and the Internet Explorer version, but the installation procedures are same.) CAUTION Service Pack 1 or higher is required for yy Windows 7 & Windows 8.
20 INSTALLING LG MONITOR SOFTWARE 6 The LG Color Cloning starts the installation as ENGLISH ENG shown below. NOTE LG Color Cloning: This program matches yy the color quality and brightness of two monitors using your Smartphone. NOTE Double-click the LG Color Cloning icon on yy des-ktop to run LG Color Cloning Application. 7 Click the complete button. 8 When the installation is complete, restart your system.
CUSTOMIZING SETTINGS 21 CUSTOMIZING SETTINGS Activating the Main Menu 3 set the options. Press the joystick button once more to exit the main menu. Button Power Indicator Joystick Button Menu Status Description Main menu disabled Enables the main menu. Main menu enabled Exits the main menu. (Holding down the button to turn off the monitor: You can turn off the monitor this way at any time, including when the OSD is on.
22 CUSTOMIZING SETTINGS Customizing settings ENGLISH ENG Menu Settings -Quick Settings 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Go to Quick Settings > Brightness by moving the joystick. 2 3 Configure the options following the instructions that appear in the 4 5 bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it.
CUSTOMIZING SETTINGS 23 NOTE ENG ENGLISH Saving Data depends on the Panel. So,those values should be different from each panel and panel yy vendor.If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or lower depend on source. y yIf option of SMART ENERGY SAVING is High or Low, Picture Mode will automatically be Custom and Color Wizard will automatically be Off.
24 CUSTOMIZING SETTINGS -Picture ENGLISH ENG 1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Menu. Go to Picture by moving the joystick. 2 3 Configure the options following the instructions that appear in the bottom right corner. 4 To return to the upper menu or set other menu items, 5 move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Each option is described below.
CUSTOMIZING SETTINGS P i c t u r e Picture Adjust SUPER RESOLUTION+ 24MP57D 24MP57HQ 24MP57VQ 24MC57HQ 27MP57HQ 27MP57VQ 27MP57HT Sharpness Black Level 22MP57HQ 24MP57HQ 22MP57VQ 24MP57VQ 22MC57HQ 24MC57HQ 23MP57H 27MP57HQ 23MP57HQ 27MP57VQ 23MP57VQ 27MP57HT Response Time 22MP57HQ 24MP57HQ 22MP57VQ 24MP57VQ 22MC57HQ 24MC57HQ 23MP57H 27MP57HQ 23MP57HQ 27MP57VQ 23MP57VQ 27MP57HT Over Scan 22MP57HQ 24MP57HQ 22MP57VQ 24MP57VQ 22MC57HQ 24MC57HQ 23MP57H 27MP57HQ High Optimized picture quality is displa
26 CUSTOMIZING SETTINGS -General ENGLISH ENG 1 To view the OSD menu, press the joystick but- ton at the bottom of the monitor and then enter the Menu. Go to General by moving the joystick. 2 3 Configure the options following the instructions that appear in the bottom right corner. 4 To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. 5 If you want to exit the OSD menu, move the joystick to ◄ until you exit. Each option is described below.
CUSTOMIZING SETTINGS 27 -Auto Configuration bottom of the monitor and then enter the Menu. 2 Go to Auto Configuration by moving the joystick. 3 Configure the options following the instructions that appear in the 4 5 bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Each option is described below.
28 CUSTOMIZING SETTINGS -Reset ENGLISH ENG 1 To view the OSD menu, press the joystick but- ton at the bottom of the monitor and then enter the Menu. Go to Reset by moving the joystick. 2 3 Configure the options following the instructions that 4 5 appear in the bottom right corner. To return to the upper menu or set other menu items, move the joystick to ◄ or pressing ( / OK) it. If you want to exit the OSD menu, move the joystick to ◄ until you exit. Each option is described below.
CUSTOMIZING SETTINGS 29 -Picture mode bottom. Each option is described below. Joystick Button > Picture Mode Picture Mode Description Custom Allows the user to adjust each element. The color mode of the main menu can be adjusted. Reader 1 It is a mode that the screen is adjusted to the best for the newspaper. If you want screen more bright, you can control brightness in Menu OSD. Reader 2 It is a mode that the screen is adjusted to the best for the cartoon.
30 TROUBLESHOOTING ENGLISH ENG TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected? Is the power indicator light on? Is the power indicator flickering? Do you see an "OUT OF RANGE" message on the screen? Do you see a "NO SIGNAL" message on the screen? y y Check and see if the power cord is connected properly to the power outlet. y y Press the Power button.
TROUBLESHOOTING 31 CAUTION Display image is incorrect The screen color is mono or abnormal. y y Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. y y Make sure the video card is properly inserted in the slot. y y Set the color setting higher than 24 bits (true color) at Control Panel ► Settings. The screen blinks. y y Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
32 SPECIFICATIONS ENGLISH ENG SPECIFICATIONS 22MP57A 22MP57D Display Resolution Power Consumption Power Input AC-DC Adapter 22MP57HQ Screen Type 22MP57VQ 22MC57HQ Pixel Pitch TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Anti-Glare coating 0.248 mm x 0.248 mm (Pixel Pitch) Max 1920 x 1080 @ 60 Hz Recommend VESA 1920 x 1080 @ 60 Hz On Mode : 21 W (ENERGY STAR® standard)* Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W 19 V 1.
33 SPECIFICATIONS Horizontal Frequency 30 kHz to 83 kHz (Automatic) 30 kHz to 61 kHz (Automatic) Vertical 56 Hz to 75 Hz Frequency (D-SUB) 56 Hz to 75 Hz (DVI-D) 56 Hz to 61 Hz (HDMI) Input Form Separate Sync. Digital Video Input Signal Input 22MP57A ● ● ● ● ● ● ● ● ● ● ● 15 pin D-SUB Connector DVI-D Connector (Digital) HDMI Connector ● Input Form RGB Analog (0.
34 SPECIFICATIONS SPECIFICATIONS ENGLISH ENG 23MP57A 23MP57D Display Resolution Power Consumption Power Input AC-DC Adapter 23MP57H Screen Type 23MP57HQ 23MP57VQ Pixel Pitch TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Anti-Glare coating 0.265 mm x 0.265 mm (Pixel Pitch) Max 1920 x 1080 @ 60 Hz Recommend VESA 1920 x 1080 @ 60 Hz On Mode : 21 W (ENERGY STAR® standard)* Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W 19 V 1.
SPECIFICATIONS Horizontal Frequency 30 kHz to 83 kHz (Automatic) 30 kHz to 61 kHz (Automatic) Vertical 56 Hz to 75 Hz Frequency (D-SUB) 56 Hz to 75 Hz (DVI-D) 56 Hz to 61 Hz (HDMI) Input Form Separate Sync. Digital Video Input Signal Input 23MP57A ● ● ● ● ● ● ● ● ● ● ● 15 pin D-SUB Connector DVI-D Connector (Digital) HDMI Connector ● Input Form RGB Analog (0.
36 SPECIFICATIONS ENGLISH ENG SPECIFICATIONS 24MP57D 24MP57HQ Display Resolution Power Consumption Power Input AC-DC Adapter 24MP57VQ Screen Type 24MC57HQ Pixel Pitch TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Anti-Glare coating 0.2745 mm x 0.2745 mm (Pixel Pitch) Max 1920 x 1080 @ 60 Hz Recommend VESA 1920 x 1080 @ 60 Hz On Mode : 22 W (ENERGY STAR® standard)* Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W 19 V 1.
SPECIFICATIONS 37 Video Input Plug & Play Horizontal Frequency 30 kHz to 83 kHz (Automatic) 30 kHz to 61 kHz (Automatic) Vertical 56 Hz to 75 Hz Frequency (D-SUB) 56 Hz to 75 Hz (DVI-D) 56 Hz to 61 Hz (HDMI) Input Form Separate Sync. Digital Signal Input 15 pin D-SUB Connector DVI-D Connector (Digital) HDMI Connector ● ● ● ● ● ● ● ● Input Form RGB Analog (0.
38 SPECIFICATIONS ENGLISH ENG SPECIFICATIONS 27MP57HQ 27MP57VQ Display Resolution Power Consumption Power Input AC-DC Adapter 27MP57HT Screen Type Pixel Pitch TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Anti-Glare coating 0.3114 mm x 0.3114 mm (Pixel Pitch) Max 1920 x 1080 @ 60 Hz Recommend VESA 1920 x 1080 @ 60 Hz On Mode : 27 W (ENERGY STAR® standard)* Sleep Mode ≤ 0.3 W Off Mode ≤ 0.3 W 19 V 1.
SPECIFICATIONS 39 Sync Input Horizontal Frequency Vertical Frequency 30 kHz to 83 kHz (Automatic) 30 kHz to 61 kHz (Automatic) 56 Hz to 75 Hz (D-SUB) ● ● ● ● ● 56 Hz to 75 Hz (DVI-D) 56 Hz to 61 Hz (HDMI) Separate Sync. Digital Signal Input 15 pin D-SUB Connector Input Form Video Input ● ● ● ● ● ● ● ● ● ● ● ● ● ● DVI-D Connector (Digital) HDMI Connector RGB Analog (0.
40 SPECIFICATIONS Preset Modes (Resolution) ENGLISH ENG D-SUB/DVI-D Timing Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.023 75 +/+ 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60 +/+ 1280 x 1024 79.976 75 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.
PROPER POSTURE 41 ENG ENGLISH PROPER POSTURE Proper posture for using the Monitor set. Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the location of the Monitor set to avoid it reflecting light.
Declaration of Conformity Trade Name: LG Model : 22MP57A,22MP57D,22MP57HQ,22MP57VQ 22MC57HQ,23MP57A,23MP57D,23MP57HQ 23MP57VQ,24MP57D,24MP57HQ,24MP57VQ 24MC57HQ,27MP57HQ,27MP57VQ,27MP57HT Responsible Party: LG Electronics Inc. Address : 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534 *above information is only for USA FCC Regulatory Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference.
