Owner’s Manual LED LCD MONITOR (LED Monitor*) * LG LED Monitor applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 22MP400 22MP41W 24MP400 27MP40W 27MP400 27MP41D 24MP40B 24MP40A 24MP44B 27MP40A 22MP410 www.lg.com Copyright © 2021 LG Electronics Inc. All Rights Reserved.
Table of Contents LICENSE Each model has different licenses. Visit www.lg.com for more information on the license. ENGLISH LICENSE....................................................... 2 ASSEMBLING AND PREPARING................... 3 USING THE MONITOR................................... 8 USER SETTINGS......................................... 10 TROUBLESHOOTING.................................. 19 PRODUCT SPECIFICATION..........................
ASSEMBLING AND PREPARING CAUTION ENGLISH •• Always use genuine LG components to ensure safety and product performance. •• The product warranty will not cover damage or injury caused by the use of unauthorized components. •• It is recommended to use the supplied components. •• If you use generic cables not certified by LG, the screen may not display or there may be image problems. •• Illustrations in this document represent typical procedures, so they may look different from the actual product.
Moving and Lifting the Monitor Product and Button Description 22MP400 22MP410 22MP41W 24MP400 27MP400 24MP40B 24MP44B 27MP40W 27MP41D 24MP40A 27MP40A ENGLISH Joystick Button When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation, regardless of its shape or size. •• Place the monitor in the original box or packing material before attempting to move it.
Installing on a Table Adjusting the Angle •• Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm (3.94 inches) away from the wall to ensure sufficient ventilation. 1 Place the monitor mounted on the stand base in an upright position. 2 Adjust the angle of the screen. 100 mm (3.94 inches) 100 mm (3.94 inches) 24MP400 27MP400 100 mm (3.94 inches) 100 mm (3.94 inches) 24MP40B 24MP44B 27MP40W 27MP41D 100 mm (3.94 inches) 100 mm (3.
ENGLISH Using the Kensington Lock Installing the Wall Mount Plate The Kensington security system connector is located at the back of the Monitor set. For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website at http://www.kensington.com. Connect the monitor to a table using the Kensington security system cable. This monitor meets the specifications for the wall mount plate or other compatible devices.
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor. Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall. 75 x 75 M4 x L10 4 LSW 149 ENGLISH Wall Mount (mm) Standard screw Number of screws Wall Mount Plate (Optional) CAUTION •• Unplug the power cord before moving or installing the monitor to avoid electric shock.
USING THE MONITOR •• Illustrations in this manual may differ from the actual product. ENGLISH CAUTION •• Do not press the screen for a prolonged time. This may cause image distortion. •• Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a PC screensaver if possible. •• When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power outlet.
Connecting AV Devices HDMI Connection Note •• Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues. •• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. •• Recommended HDMI cable types -- High-Speed HDMI®/TM cable -- High-Speed HDMI®/TM cable with Ethernet ENGLISH HDMI transmits digital video and audio signals from your AV device to the monitor.
USER SETTINGS Note ENGLISH •• Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual. •• When Beep Guide is activated, pressing the joystick button will take you to Settings right away. Activating the Main Menu 1 Press the joystick button on the bottom of the monitor. 2 Move the joystick up/down and left/right to set the options. 3 Press the joystick button once more to exit the main menu.
Main Menu Features Input Exit ENGLISH Power Off Power Off Settings Exit Input Picture Mode Auto Configuration (for HDMI only) (for D-SUB only) Main Menu Settings Description Input Sets input mode. Power Off Turns off the monitor. Settings Configures the screen settings. Picture Mode Sets the picture mode. Exit Exits the main menu. Auto Configuration Operate the Auto configuration for optimal display in D-SUB.
Menu Settings ENGLISH 1 2 3 4 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Settings. Move the joystick up/down and left/right to set the options. To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it. If you want to exit the OSD menu, move the joystick to until you exit.
Customizing settings Quick Settings Brightness Contrast Auto Configuration Description Adjusts the color contrast and brightness of the screen. No Cancel the select. Yes Operate the Auto configuration for optimal display in D-SUB. ENGLISH Settings > Quick Settings Input Settings > Input Input List Description Selects the input mode. Adjusts the aspect ratio of the screen. Aspect Ratio Full Wide Displays the video in wide-screen, regardless of the video signal input.
Picture Settings > Picture ENGLISH Picture Mode Description Custom Allows the user to adjust each element. The color mode of the main menu can be adjusted. Reader Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu. Photo Optimizes the screen to view photos. Cinema Optimizes the screen to improve the visual effects of a video. Color Weakness This mode is for users who cannot distinguish between red and green.
Settings > Picture Description Adjusts the brightness of the screen. Adjusts the contrast of the screen. Sharpness Adjusts the sharpness of the screen. SUPER RESOLUTION+ Picture Adjust High Optimized picture quality is displayed when a user wants crystal clear images. It is effective for high quality video or game. Middle The optimized picture quality is displayed when a user wants images between low and high modes for comfortable viewing. It is effective for UCC or SD video.
Sets a response time for displayed pictures based on the speed of the screen. For a normal environment, it is recommended that you use Fast. For a fast-moving picture, it is recommended that you use Faster. Once Faster Mode is selected, Motion Blur may occur depending on the content. ENGLISH Response Time Faster Sets the response time to faster. Fast Sets the response time to fast. Normal Sets the response time to normal. Off Does not use the response time improvement feature.
Gamma Color Temp The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter the image becomes. Mode 4 If you do not need to adjust the gamma settings, select Mode 4. Selects the factory default picture color. Custom: The user can adjust it to red, green or blue by customization. Warm: Sets the screen color to a reddish tone. Medium: Sets the screen color between a red and blue tone. Cool: Sets the screen color to a bluish tone.
General Settings > General ENGLISH Language SMART ENERGY SAVING Description To choose the language in which the control names are displayed. High Enables SMART ENERGY SAVING you can save energy with this energy- high efficient. Low Enables SMART ENERGY SAVING you can save energy with this energy- low efficient. Off Disables SMART ENERGY SAVING . * SMART ENERGY SAVING : Conserve energy by using luminance compensation algorithm.
TROUBLESHOOTING Check the following before calling for service. Is the power cord of the display connected? •• Check and see if the power cord is connected properly to the power outlet. Do you see an "Out of Range" message on the screen? •• This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again.
PRODUCT SPECIFICATION 22MP400 ENGLISH Color Depth Resolution Power Sources AC/DC adaptor 20 8-bit color is supported. Max Resolution 1920 x 1080 @ 75 Hz (HDMI) 1920 x 1080 @ 60 Hz (D-Sub) Recommended Resolution 1920 x 1080 @ 60 Hz Power Rating 19 V Power Consumption On mode: 18 W Typ. (Typical)* Sleep Mode (Standby Mode) ≤ 0.3 W** Off Mode ≤ 0.3 W 1.
Operating Conditions Environmental Conditions Storing Conditions ENGLISH AC/DC adaptor or Type WA-24C19FS, manufactured by Asian Power Devices Inc., or Type WA-24C19FN, manufactured by Asian Power Devices Inc., or Type DA-24B19, manufactured by Asian Power Devices Inc., or Type AD10560LF, manufactured by PI Electronics (H.K.) Ltd., or Type AD2139S20, manufactured by PI Electronics (H.K.) Ltd., or Type AD2139620, manufactured by PI Electronics (H.K.) Ltd.. Output: 19 V 1.
PRODUCT SPECIFICATION 22MP410 22MP41W ENGLISH Color Depth Resolution Power Sources AC/DC adaptor 22 8-bit color is supported. Max Resolution 1920 x 1080 @ 75 Hz (HDMI) 1920 x 1080 @ 60 Hz (D-Sub) Recommended Resolution 1920 x 1080 @ 60 Hz Power Rating 19 V Power Consumption On mode: 19 W Typ. (Typical)* Sleep Mode (Standby Mode) ≤ 0.3 W** Off Mode ≤ 0.3 W 1.
Operating Conditions Environmental Conditions ENGLISH AC/DC adaptor or Type WA-24C19FS, manufactured by Asian Power Devices Inc., or Type WA-24C19FN, manufactured by Asian Power Devices Inc., or Type DA-24B19, manufactured by Asian Power Devices Inc., or Type AD10560LF, manufactured by PI Electronics (H.K.) Ltd., or Type AD2139S20, manufactured by PI Electronics (H.K.) Ltd., or Type AD2139620, manufactured by PI Electronics (H.K.) Ltd.. Output: 19 V 1.
PRODUCT SPECIFICATION 24MP400 24MP40B 24MP44B 24MP40A ENGLISH Color Depth Resolution Power Sources AC/DC adaptor 24 8-bit color is supported. Max Resolution 1920 x 1080 @ 75 Hz (HDMI) 1920 x 1080 @ 60 Hz (D-Sub) Recommended Resolution 1920 x 1080 @ 60 Hz Power Rating 19 V Power Consumption On mode: 19 W Typ. (Typical)* Sleep Mode (Standby Mode) ≤ 0.3 W** Off Mode ≤ 0.3 W 1.
Operating Conditions Environmental Conditions Storing Conditions ENGLISH AC/DC adaptor or Type WA-24C19FS, manufactured by Asian Power Devices Inc., or Type WA-24C19FN, manufactured by Asian Power Devices Inc., or Type DA-24B19, manufactured by Asian Power Devices Inc., or Type AD10560LF, manufactured by PI Electronics (H.K.) Ltd., or Type AD2139S20, manufactured by PI Electronics (H.K.) Ltd., or Type AD2139620, manufactured by PI Electronics (H.K.) Ltd.. Output: 19 V 1.
PRODUCT SPECIFICATION 27MP400 27MP40W 27MP41D 27MP40A ENGLISH Color Depth Resolution Power Sources AC/DC adaptor 26 8-bit color is supported. Max Resolution 1920 x 1080 @ 75 Hz (HDMI) 1920 x 1080 @ 60 Hz (D-Sub) Recommended Resolution 1920 x 1080 @ 60 Hz Power Rating 19 V Power Consumption On mode: 22 W Typ. (Typical)* Sleep Mode (Standby Mode) ≤ 0.3 W** Off Mode ≤ 0.3 W 1.
Operating Conditions Environmental Conditions Storing Conditions ENGLISH AC/DC adaptor or Type WA-24C19FS, manufactured by Asian Power Devices Inc., or Type WA-24C19FN, manufactured by Asian Power Devices Inc., or Type DA-24B19, manufactured by Asian Power Devices Inc., or Type AD10560LF, manufactured by PI Electronics (H.K.) Ltd., or Type AD2139S20, manufactured by PI Electronics (H.K.) Ltd., or Type AD2139620, manufactured by PI Electronics (H.K.) Ltd.. Output: 19 V 1.
Factory Support Mode (Preset Mode, PC) D-SUB ENGLISH 28 Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) 720 x 400 31.468 70.08 -/+ 640 x 480 31.469 59.94 -/- 640 x 480 37.5 75 -/- 800 x 600 37.879 60.317 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.023 75.029 +/+ 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60.023 +/+ 1280 x 1024 79.976 75.035 +/+ 1680 x 1050 65.290 59.954 -/+ 1920 x 1080 67.
HDMI Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) 720 x 400 31.468 70.08 -/+ 640 x 480 31.469 59.94 -/- 640 x 480 37.5 75 -/- 800 x 600 37.879 60.317 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.023 75.029 +/+ 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60.023 +/+ 1280 x 1024 79.976 75.035 +/+ 1680 x 1050 65.290 59.954 -/+ 1920 x 1080 67.500 60 +/+ 1920 x 1080 83.89 74.
HDMI Timing (Video) ENGLISH Factory support mode (Preset Mode) Horizontal Frequency(kHz) Vertical Frequency(Hz) HDMI 480P 576P 720P 31.50 31.25 37.50 60 50 50 O O O 720P 45.00 60 O 1080P 56.25 50 O 60 O Recommend Mode 1080P 30 67.
Beep Guide Menu Location Menu Location Menu Location 1 Picture - Picture Adjust - Brightness 3 2 1 1 Slider Picture - Game Adjust - Black Stabilizer 333 11 Picture - Picture Adjust - Contrast 322 Picture - Game Adjust - Black Stabilizer 3 3 3 1 Slider Quick Settings - Brightness 1 1 1 Slider Picture - Picture Adjust - Contrast 3 2 2 1 Slider Quick Settings - Contrast 12 Picture - Picture Adjust - Sharpness 323 Quick Settings - Contrast 1 2 1 Slider Picture - Picture Adjust - Sharpn
Menu Picture - Configuration Adjust (Only D-sub) ENGLISH Picture - Configuration Adjust (Only D-sub) - Horizontal Picture - Configuration Adjust (Only D-sub) - Horizontal Picture - Configuration Adjust (Only D-sub) - Vertical Picture - Configuration Adjust (Only D-sub) - Vertical 35 Menu Location Menu Location General - Language 41 General - Automatic Standby - 4H 433 General - Language - English 411 General - Automatic Standby - Off 434 General - Language - German 412 General - OSD Lock 4
Supplier’s Declaration of Conformity Trade Name LG Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632 E-mail lg.environmental@lge.com The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Model Serial No.