LCD TV OWNER'S MANUAL MODELS: 23LC1R * Please read Information Manual included together before reading this manual and operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote require service.
Contents 3 Installation How to join the product assembly tumbling set to the wall to protect the 5 6 Location and function of controls Remote control handset Battery installation / Front/ Rear Basic operation On and off / Programme selection Volume adjustment / Quick view Mute function On screen language selection 10 On 11 screen menus Menu selection Setting 12 Picture adjustment PSM (Picture Status Picture adjustment Picture format 17 up TV stations Auto programme tuning Manual programme t
Installation Unfolding ENGLISH the stand base 1. Place the set with its front facing downward on a cushion 2. Hold down the release button inside the stand and or soft cloth. strongly pull out the stand with your two hands. Note: Here shown may be somewhat different from your set. The stand won't move if you don't press release button.
Installation Connection of TV 1. Connect the aerial cable to the socket marked +75 Ω on the back. For the best reception an outdoor aerial should be used. 2. To connect an additional equipment, see the Connection of external equipment section. 3. Connect the power cord. Note: Here shown may be somewhat different from your set. ( ) Positioning your display Adjust ? the position of the panel in various ways for maximum comfort.
How to wall join the product assembly to the wall set tumbling protect the set Please set it up carefully Set it up close to the wall so the The instructions shown below is when it is the product so the doesn't fall product over when it is doesn't fall pushed to over. backwards. safer way to set up the product, which is to fix it on the wall so the product doesn't fall over in the forward direction. It will prevent the product from falling forward and hurting people.
Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be panel of the set. operate this Only adjusted with the buttons the remote control handset on supplied the top will set. Remote control handset 10 MUTE POWER 1 11 TV INPUT I/II Before you use the remote control handset, batteries. See the next page. 1. 12 2 LIST MUTE switches the sound 13 2. OK VOL menu switches the set PR 3. VOL 4.
Location and function of controls 11. POWER switches the set 12. I/II selects the on from standby language during dual or off to ENGLISH standby. language broadcast. 13. MENU selects a menu. 10 MUTE 14. PSM (Picture Status recalls your preferred Memory) picture setting. POWER 1 11 TV INPUT I/II 12 2 15. TELETEXT BUTTONS These buttons are used for teletext. For further details, see the 'Teletext' section. LIST Q.
Location and function of controls Front Top panel PR VOL OK MENU INPUT /I 7 6 5 432 1 8 1. ON/OFF( 6. /I) switches the set on from standby or 3. a programme or a menu item. switches the set on from standby. INPUT selects the remote 7. REMOTE CONTROL SENSOR switches the set 8. POWER/STANDBY INDICATOR operating mode. on from standby. MENU selects 4. a menu. OK accepts your selection or displays mode. 5. 8 (Programme Down/Up) selects off to standby. 2.
Location and function of controls ENGLISH Rear COMPONENT VIDEO COMPONENT (VIDEO / AUDIO Input) L AUDIO R PC SOUND PC INPUT JACK PC INPUT ANTENNA INPUT INPUT ANTIN( 75 ) PC SOUND AV1 H/P AC IN AV2 AC INPUT EURO SCART AUDIO/VIDEO SOCKET INPUT S-VIDEO S-VIDEO INPUT HEADPHONE JACK 9
Basic operation On and off 1. Press the switch it 2. 3. POWER : If, while the INPUT , TV, INPUT or NUMBER buttons to set is switched on, the mains the set will switch to replaced TV D / E fully. Press the POWER button. The set reverts to Pull out mains plugs to switch the set off. Note MUTE POWER, on standby or power in the mains power socket. on standby plug mode. is disconnected when the mains plug is I/II Programme selection You a Q.
On ENGLISH screen menus Menu selection 1. 2. 3. Press the MENU button and then D / E button to display each menu. Press the G button and then D / E button to select a menu item. the setting of an item in the sub or pull-down menu with F/G button. You can move to the higher level menu by pressing the OK button and to move to the lower level menu by pressing the MENU button. Change Note : a. In the TV, AV, S-video not b. or COMPONENT mode, the PC menu is displayed.
Setting up Channel TV stations Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. Auto programme Manual programme Programme edit Favourite programme Auto programme DEFG OK tuning All stations that can be received are stored by this method.
Setting up Manual programme TV stations tuning ENGLISH Channel Auto programme Manual programme Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. 1. Press the MENU button and then D / E button to select the Channel Programme edit Favourite programme DEFG menu. 2. Press the G button and then D / E button to select Manual 3. programme.
Setting up Assigning a station name 1. Repeat the 'Manual programme tuning' steps Channel Auto programme Manual programme Favourite programme 3. 4. With the F button you can select in the opposite direction. Select the position by pressing the F / G button and then make 5. your choice of the second character, and Press the OK button to store it. 6. Press the TV button to return to normal TV . +, OK MENU TV MENU PR OK VOL VOL PR 14 1 to 2.
Setting up Programme TV stations Auto programme Manual programme This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. 1. menu. Favourite programme DEFG 2. Press the G button and then D / E button to select edit. Programme 3. Press the G button to menu. display the 0C0 35S Deleting 2.
Setting up TV stations Favourite programme Channel Auto programme This function lets you select your favourite programmes Manual programme Programme edit Favourite programme directly. 1. Press the MENU button and then D / E button to select the Channel menu. 2. Press the G button and then D / E to select Favourite programme. DEFG OK MENU Favourite programme On -- ----- -- ----- -- ----- -- ----- -- ----- -- ----- -- ----- -- ----- DEFG 3. TV 4. 5. LIST Q.VIEW MENU 6. 7.
Picture PSM adjustment (Picture Status Memory) ENGLISH Picture PSM 1. Press the MENU button and then D / E button to select the Picture 2. 3. Brightness menu. Colour Press the G button and then D / E button to select PSM. Press the G button and then D / E button to select a picture set- ting 4. Contrast on the PSM Sharpness menu. Press the OK button. DEFG OK MENU Picture PSM Dynamic Contrast Standard Brightness Mild Colour Game Sharpness User DEFG 5.
Picture adjustment Picture format You watch TV in various can picture formats; 16:9, 14:9, Zoom, 4:3. Auto, Repeatedly press the ARC button to select your desired picture for- mat. 16:9 You can enjoy the cinema (the picture format of 16:9) or general TV programme through the 16:9 mode. The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
Sound SSM You ENGLISH Sound (Sound Status Memory) SSM select your preferred sound setting; Flat, Music, Movie or and you can also adjust the sound frequency of the equalizer. can Speech 1. adjustment AVL Balance Press the MENU button and then D / E button to select the Sound menu. Sound DEFG SSM Flat AVL Music Balance Movie OK MENU Speech G User DEFG 2. 3. OK MENU Press the G button and then D / E button to select SSM.
Sound adjustment Stereo/Dual reception When a programme is selected, the sound information for the station appears after the programme number and station name disappear. I/II Broadcast On Screen Mono MONO Stereo STEREO Dual DUAL I Display Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II button twice again.
TIME Menu Clock ENGLISH Time Time You must set the time 1. using Off time on/off time function. Press the MENU button and then D / E TIME 2. before correctly On time Auto off button to select the menu. Press the G button and then D / E button to select TIME. Time DEFG Time OK MENU -i-i:i-i- Off time On time Auto off DEFG OK MENU 3. Press the G button and then D/E button to 4. Press the G button and then D / E button to 5. Press the MENU button to adjust the hour.
TIME Menu Auto off Time Time Off time If you select On on the Auto off menu, the set will automatically switch itself to standby mode approximately ten minutes after a TV On time Auto off station DEFG 1. OK MENU stops broadcasting. Press the MENU button and then D/E TIME button to select the menu. 2. Press the G button and then D / E button to select Auto off. 3. Press the G button and then D / E button to select On or Off. Time Time Off time On time On Auto off Off DEFG MENU 4.
Other functions TV, AV and PC modes ENGLISH Setup Language Input be set for TV, AV or PC mode. AV mode is used when a Inputs video cassette recorder (VCR), or other equipment is connected to can Child lock Power indicator the set. Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the 'Connection of external equipment' section. 1. 3. OK MENU Press the MENU button and then D / E button to select the Setup 2. DEFG menu.
Other functions Setup Child lock Language Input Child lock The TV Power indicator control it. This feature can be set that the remote control handset is needed to so can be used to prevent unauthorized view- ing. DEFG OK 1. MENU Press the MENU button and then D / E button to select the Setup 2. 3. menu. Press the G button and then D / E button to select Child lock. Press the G button and then D / E button to select On or Off on the Child lock menu.
Teletext - ENGLISH This feature is not available in all countries. Teletext (or TOP text) is an optional function, therefore only with the teletext system can receive the teletext broadcast. Teletext is a free service broadcast by most TV stations which up-to-the-minute information on news, weather, television programmes, share prices and many other topics. a set gives The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems.
Teletext Direct page selection Corresponding to the SIMPLE teletext mode, you ber using the NUMBER buttons in TOP mode. can select a page by entering it as a three digit num- FASTEXT The teletext pages are colour coded corresponding coloured button. along the bottom of the selection Press the i button to select the index page. You can select the pages which are colour coded screen and are selected by pressing the Page 1. 2. along the bottom line with the same coloured but- tons.
Connection of external You connect additional equipment, such as etc. to your set. Examples are shown as below. can equipment ENGLISH VCRs, camcorders Aerial socket PC INPUT 1. 2. 3. 4. 5. Connect the RF out socket of the VCR to the aerial socket of the set. Connect the aerial cable to the RF aerial in socket of the VCR. Store the VCR channel on a desired programme number using the 'Manual programme tuning' section. Select the programme number where the VCR channel is stored.
Connection of external Euro scart socket PC INPUT (DVD) ANT IN AV1 1. S-V AV2 2. 3. Connect the Euro scart socket of the DVD to the Euro scart socket of the set. Press the INPUT button to select AV1. Press the PLAY button on the DVD. The DVD DVD DVD COMPONENT 1. VIDEO L AUDIO equipment R DVD input playback picture Y PB PB PR) on the screen.
Connection of PC ENGLISH PC in socket 1. 2. 3. 4. Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the PC input socket of the set. Connect the audio cable from the PC to the PC SOUND sockets of the set. Press the INPUT button to select PC. Switch on the PC, and the PC screen appears on the set. The set can be operated as the PC monitor.
Connection of PC PC PC Setup H-Position V-Position You can adjust horizontal/vertical position, clock, phase, configure, reset as you prefer. Clock Phase Auto Configure Reset DEFG OK and auto- 1. Press the MENU button and then D / E button to select the Setup MENU 2. 3. 4. menu. Press the G button and then D / E button to select Input. Press the G button and then D / E button to select PC. Press the MENU button and then D / E button to select the PC menu.
T roubleshooting Checklist Checklist The ? doesn't work Power is suddenly turned off Check to control The remote control does not work operation see if there is any obstruction. object normally. between the product and the remote causing ? Are batteries installed with correct ? Correct remote ? Install new ? Is the sleep ? Check the power control settings. Power interrupted No broadcast on station tuned with Auto off activated.
The audio function does not work. No ? Press the VOL Picture OK & ? Sound muted? Press MUTE button. No sound ? Try ? Are the audio cables installed ? Adjust ? A output from of the one another channel. The Balance in problem may be properly? with the broadcast. option. menu speakers Unusual sound from inside the change in ambient noise when the product the humidity or temperature may result in an unusual product is turned on or off and does not indicate a fault with product.