LCD TV OWNER’S MANUAL 20LS7D 20LS7DC 23LS7D 23LS7DC Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”.
9 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 10 Never touch this apparatus or antenna during a thunder or lighting storm. 11 Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something. 12 Refer all servicing to qualified service personnel.
CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 PICTURE CONTROL SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 36 Preset Picture Settings - Picture Mode - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 - Color Tone - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TIME SETTING Clock Setting - Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 - Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Auto On/Off Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Sleep Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION FEATURE OF THIS TV LG's own special digital image generator, consisting of a full digital image processor, six different main picture quality factors. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio.
PREPARATION ACCESSORIES SO 1 2 4 AD L MU JU UT TIM ER 9 TV FA V SA ST PO W ER UR CK 2 4 IT AD L MU BA JU T TIM ER 9 FA V ST TE CC U INPU D 6 8 0 VO MEN UN 3 5 7 - E SO 1 CH EX P PICT TE CC BA NP D 6 8 0 VO UN 3 5 7 - PREPARATION Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product.
PREPARATION FRONT PANEL INFORMATION ■ Here shown may be somewhat different from your TV. PREPARATION POWER INPUT MENU ENTER VOLUME CHANNEL Button Button Button Button (F,G)Buttons (E,D)Buttons /I INPUT MENU ENTER VOL CH Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. Illuminates green when the set is switched on. ! NOTE G 8 If your product has a protection tape attached, remove the tape.
BACK PANEL INFORMATION ■ Here shown may be somewhat different from your TV. PREPARATION 8 2 1 ANTENNA/ CABLE IN HDMI/DVI IN 3 AV IN S-VIDEO AUDIO VIDEO SERVICE ONLY L(MONO) RGB (PC) IN 4 AUDIO (RGB/DVI) IN 5 R H/P RS-232C IN (SERVICE ONLY) 1 AUDIO VIDEO COMPONENT IN 7 1 SERVICE ONLY RS-232C IN (SERVICE ONLY) PORT For service. 2 HDMI/DVI IN Connect a HDMI signal to this jack. Or DVI (Video) signal to this jack with a HDMI to DVI cable.
PREPARATION STAND INSTALLATION ■ Here shown may be somewhat different from your TV. PREPARATION 1 Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Hold the H I N G E B O D Y and bend it upward. HINGE BODY 3 Insert the S T A N D B O D Y into the product until clicking sound. STAND BODY 4 Assemble the parts of the S T A N D B O D Y with C O V E R B A S E of the product.
DETACHING STAND ■ Here shown may be somewhat different from your TV. Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Pull cover base backward while pressing button on stand body. 3 Shake the base while pulling, it will separate from stand body. 4 Hold the H I N G E B O D Y and bend it upward. PREPARATION 1 HINGE BODY 5 Pull stand body to separate from set while pressing the 2 latches.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Here shown may be somewhat different from your TV. PREPARATION 1 Connect the cables as necessary. To connect an additional equipment, see the E X T E R N A L E Q U I P M E N T S E T U P section. 2 Install the C A B L E M A N A G E M E N T as shown. CABLE MANAGEMENT How to remove the CABLE MANAGEMENT First, press the cable management. Hold the C A B L E M A N A G E M E N T with both hands and pull it upward.
POSITIONING YOUR DISPLAY Here shown may be somewhat different from your TV. ■ Adjust the position of the panel in various ways for maximum comfort.
PREPARATION VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket. 100 mm PREPARATION 100 mm ! NOTE G Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall Mounting Instruction Guide. DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.
KENSINGTON SECURITY SYSTEM PREPARATION - The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. - For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact h t t p : / / w w w . k e n s i n g t o n . c o m, the internet homepage of the Kensington company.
PREPARATION ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) PREPARATION Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.
EXTERNAL EQUIPMENT SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. EXTERNAL EQUIPMENT SETUP When connecting Component cable 1.
EXTERNAL EQUIPMENT SETUP When connecting HDMI cable 1. How to connect EXTERNAL EQUIPMENT SETUP 1 Connect the digital set-top box to H D M I / D V I I N jack on the set. 2 No separated audio connection is necessary. HDMI supports both audio and video. AV IN 2. How to use VIDEO ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select H D M I input source by using the I N P U T button on the remote control.
When connecting HDMI to DVI cable AV IN VIDEO AUDIO L(MONO) S-VIDEO RGB (PC) IN SERVICE ONLY AUDIO (RGB/DVI) IN R 1 H/P RS-232C IN (SERVICE ONLY) AUDIO VIDEO COMPONENT IN 2 DVI-DTV OUTPUT L EXTERNAL EQUIPMENT SETUP ANTENNA/ CABLE IN HDMI/DVI IN R 1. How to connect 1 Connect the DVI output of the digital set-top box to the H D M I / D V I I N jack on the set. 2 Connect the audio output of the digital set-top box to the A U D I O ( R G B / D V I) I N jack on the set. 2.
EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting Component cable 1. How to connect EXTERNAL EQUIPMENT SETUP 1 2 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the set. Turn on the DVD player, insert a DVD. ■ Select C o m p o n e n t input source by using the I N P U T button on the remote control.
When connecting with an S-Video cable 1. How to connect ANTENNA/ CABLE IN VI IN AV IN 1 Connect the S-VIDEO output of the DVD to the S - V I D E O input on the set. VIDEO AUDIO L(MONO) Connect the audio outputs of the DVD to the A U D I O input jacks on the set. Turn on the DVD player, insert a DVD. ■ Select A V input source by using the I N P U T button on the remote control. ■ Refer to the DVD player's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon.
When connecting with a RCA cable ANT CA HDMI/DVI IN AV IN 1. How to connect 1 AUDIO S-VIDEO SERVICE ONLY L(MONO) R H/P RS-232C IN (SERVICE ONLY) VIDEO COMPO 2. How to use ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) ■ Select A V input source by using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP HEADPHONE SETUP You can listen to the sound through the headphone. 1. How to connect EXTERNAL EQUIPMENT SETUP 24 1 Plug the headphone into the headphone socket. 2 To adjust the headphone volume, press the V O L + or - button. If you press the M U T E button, the sound from the headphone is switched off.
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. AV IN When connecting D-sub 15pin cable 1. How to connect Connect the RGB output of the PC to the R G B ( P C) I N jack on the set. 2 Connect the PC audio output to the A U D I O ( R G B / D V I) I N jack on the set. L(MONO) S-VIDEO RGB (PC) IN AUDIO (RGB/DVI) IN R /P AUDIO VIDEO COMPONENT IN 1 2 RGB OUTPUT AUDIO 2. How to use ■ Turn on the PC and the TV.
EXTERNAL EQUIPMENT SETUP ! NOTES EXTERNAL EQUIPMENT SETUP G To get the the best picture quality, adjust the PC graphics card to 1366x768. G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G If the video doesn’t fit the screen, try pressing the ADJUST button to adjust the screen position of TV. G Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode.
Screen Setup for PC mode - 0 FAV ADJUST Overview MUTE VOL MENU Auto Config. 1024 x 768 Resolution 1280 x 768 Position 1360 x 768 Size 1366 x 768 EXIT BACK Phase Reset Adjustment for screen Resolution, Position, Size, and Phase 1 Press the A D J U S T button and then use D or E button to select R e s o l u t i o n, P o s i t i o n, S i z e, or P h a s e. 2 Press the ENTER button and then use D E make appropriate adjustments. ■ The P h a s e adjustment range is 0 ~ + 6 3.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. SAP Analog mode: Selects MTS sound (Mono, Stereo, or a SAP) G p.50 DTV mode: Changes the audio language. POWER INPUT TV PICTURE SAP SOUND TIMER PICTURE Selects the factory preset picture depend on the viewing environment. G p.38 WATCHING TV / CHANNEL CONTROL SOUND Selects the factory preset sound for type of program. G p.
POWER Turns your TV on or off. TV In AV, Component, RGB-PC, and HDMI input sources, screen returns to the last TV channel. INPUT External input modes rotate in regular sequence: TV, AV, Component, RGB-PC, and HDMI. (AV, Component, RGB-PC, and HDMI input sources are linked automatically, only if a device is connected.) — (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. FAV Scroll through the programmed Favorite channels. G p.
WATCHING TV / CHANNEL CONTROL TURNING ON TV POWER TV First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , INPUT, C H (D or E) button on the TV or press the POWER, INPUT, T V, CH (+ or -)), Number (0~9 9 ) button on the remote control. 1 WATCHING TV / CHANNEL CONTROL Select the viewing source by using the INPUT button on the remote control.
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 Press the M E N U button and then use D or E button to select the each menu.
WATCHING TV / CHANNEL CONTROL CC CHANNEL SEARCH MENU BACK EXIT Auto Scan (Auto Tuning) ENTER WATCHING TV / CHANNEL CONTROL Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. A password is required to gain access to Auto Tuning menu if the Lock System is turned on. Auto Tuning 1 Press the M E N U button and then use D or E button to select the S E T U P menu.
CC MENU EXIT BACK Add/Delete Channel (Manual Tuning) ENTER A password is required to gain access to Manual Tuning menu if the Lock System is turned on. If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. 1 D 2 Press the G button and then use select M a n u a l T u n i n g.
WATCHING TV / CHANNEL CONTROL - 0 FAV ADJUST Channel Editing MUTE VOL CH CC WATCHING TV / CHANNEL CONTROL There are two different ways in order to add or delete scanned channels. One is "Custom List" and the other is "Favorite List" in the channel list. Both of them are available after Auto Tuning on the SETUP menu. A Custom List can be created by toggling each channel on or off with ENTER button. You can create your own Favorite List.
CC KEY LOCK MENU BACK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. ENTER 1 2 Press the G button and then use select K e y L o c k.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL CC MENU This feature allows an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. ■ RGB-PC input source use 4:3 or 16:9 aspect ratio. BACK EXIT ENTER ! NOTE G PICTURE CONTROL 1 2 If a fixed image is displayed on the screen for a long time, the image may become imprinted on the screen and remain visible.
Set by program Zoom Selects the proper picture proportion to match the source’s image. Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. (4:3 16:9) PICTURE CONTROL (16:9 4:3) 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. 16:9 Adjust the picture horizontally, in a linear proportion to fill the entire screen.
PICTURE CONTROL PRESET PICTURE SETTINGS POWER TV Picture Mode - Preset Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the program category. D y n a m i c, S t a n d a r d, M i l d Settings are preset for the optimum picture quality at the factory and are not adjustable. In the U s e r mode only, user can directly adjust the contrast, brightness, color, sharpness, tint.
MUTE VOL CH CC MENU BACK EXIT Color Tone - Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. When selecting Picture Mode options (Dynamic, Standard and Mild), C o l o r T e m p e r a t u r e is automatically change. When selecting Picture Mode options (User), you can choose the C o l o r T e m p e r a t u r e.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT MUTE VOL CH CC MENU BACK EXIT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. PICTURE CONTROL 1 Press the M E N U button and then use to select the P I C T U R E menu. D or E button ENTER Picture Mode : User Color Temperature : Cool XD Advanced 2 Press the G button and then use select P i c t u r e M o d e.
MUTE VOL CH CC MENU BACK EXIT Color Tone - User Mode You can also adjust the detailed settings (Red, Green, Blue) by selecting the C o l o r T e m p e r a t u r e - U s e r menu. This feature operate only if the picture mode set U s e r. D or E button Picture Mode : User Color Temperature : Cool PICTURE CONTROL 1 Press the M E N U button and then use to select the P I C T U R E menu. ENTER XD Advanced 2 Press the G button and then use select C o l o r T e m p e r a t u r e.
PICTURE CONTROL XD - PICTURE IMPROVEMENT TECHNOLOGY MUTE VOL MENU XD is LG’s unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. When selecting Picture Mode options (Dynamic, Standard, and Mild), XD is automatically changed to Auto. When selecting Picture Mode option (User), you can choose the Auto / Manual. When selecting the Manual, you can adjust the XD Contrast, XD Color and XD Noise.
ADVANCED - BLACK (DARKNESS) LEVEL VOL MUTE CH CC MENU BACK EXIT Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature operates only in AV or HDMI mode. ENTER Press the M E N U button and then use to select the P I C T U R E menu. D or E button Picture Mode : User Color Temperature : Cool PICTURE CONTROL 1 XD Advanced 2 Press the G button and then use select A d v a n c e d.
PICTURE CONTROL BACK LIGHT MUTE VOL CH CC MENU BACK EXIT Adjust the brightness of LCD panel to control the brightness of screen. ENTER PICTURE CONTROL 1 Press the M E N U button and then use to select the P I C T U R E menu. D or E button Picture Mode : User Color Temperature : Cool XD Advanced 2 Press the G button and then use select B a c k L i g h t.
LOW - POWER PICTURE MODE MUTE VOL CH CC MENU BACK EXIT Low power reduces the display power consumption. ENTER 1 2 Press the G button and then use select L o w P o w e r. D D or or E E button PICTURE CONTROL Language Press the M E N U button and then use to select the O P T I O N menu. : English Key Lock : Off Caption : Off Low Power : Off button to 1 3 Press the G button and then use select O n or O f f.
PICTURE CONTROL PICTURE RESET MUTE VOL CH CC MENU BACK EXIT Use to quickly reset all the Picture menu options to their original factory preset values. ENTER PICTURE CONTROL 1 2 Press the M E N U button and then use to select the P I C T U R E menu. Press the G button and then use select Picture Reset.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) POWER TV Sound Mode lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. Standard, Music, Movie, and Sports are preset for good sound quality at the factory and are not adjustable.
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT - USER MODE MUTE VOL CH CC MENU BACK EXIT Adjust the sound to suit your taste and room situations. ENTER SOUND & LANGUAGE CONTROL 1 Press the M E N U button and then use to select the A U D I O menu. D or E 2 Press the G button and then use select S o u n d M o d e. or E button to 3 4 Press the G button and then use select U s e r.
BALANCE VOL MUTE CH CC MENU BACK EXIT Adjust the left/right sound of speaker to suit your taste and room situations. ENTER D or E 2 Press the G button and then use select B a l a n c e. or E button to D button Sound Mode : Standard Balance :0 1 3 4 Press the G button and then use make appropriate adjustments. F or G button to Sound Mode Balance 0 L R Press the E X I T button to return to TV viewing or press the B A C K button to return to the previous menu.
SOUND & LANGUAGE CONTROL STEREO/SAP BROADCASTS SETUP POWER TV This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal as well as the original one and when you select Stereo or SAP on the remote control. Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected.
AUDIO LANGUAGE MUTE VOL CH CC MENU EXIT BACK Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. ENTER Language D 2 Press the G button and then use select L a n g u a g e. or D or E E button : English Key Lock : Off Caption : Off Low Power : Off button to 1 3 Press the G button and then use select A u d i o.
SOUND & LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION MUTE VOL CH CC MENU EXIT BACK The menus can be shown on the screen in the selected language. First select your language. ENTER Language 1 Press the M E N U button and then use D or E button to select the O P T I O N menu. SOUND & LANGUAGE CONTROL 2 Press the G button and then use select L a n g u a g e . 3 Press the G button and then use select M e n u .
CAPTION MODE VOL MUTE CH CC MENU BACK EXIT Caption must be provided to help people with hearing loss watch TV. ENTER 1 Use the C C button to select Caption O n or O f f. 2 ■ SOUND & LANGUAGE CONTROL ■ When selecting O f f, Sub-menus for Analog, DTV, and Digital Option become disabled. Press the E X I T button to save and return to TV viewing. You can also adjust C a p t i o n in the OPTION menu.
SOUND & LANGUAGE CONTROL MUTE VOL CH CC MENU EXIT BACK Analog Broadcasting System Captions Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
MUTE VOL CH CC MENU EXIT BACK Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. ENTER Language 1 Press the G button and then use select C a p t i o n.
SOUND & LANGUAGE CONTROL MUTE VOL CH CC MENU BACK EXIT Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On. 1 Press the M E N U button and then use to select the O P T I O N menu. D or E ENTER button Language SOUND & LANGUAGE CONTROL 2 Press the G button and then use select C a p t i o n. D 3 Press the G button and then use select D i g i t a l O p t i o n.
TIME SETTING CLOCK SETTING MUTE VOL CH CC MENU EXIT BACK Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. 1 Press the G button and then use select C l o c k.
TIME SETTING MUTE VOL CH CC MENU EXIT BACK Manual Clock Setup If the current time setting is wrong, reset the clock manually. ENTER Clock 1 TIME SETTING 2 Press the M E N U button and then use to select the T I M E menu. Press the G button and then use select C l o c k. D D or or E E button : - - - -, - - - -, - - : - - - - Off Time : Off On Time : Off Sleep Time : Off Auto sleep : Off button to 1 3 Press the G button and then use select M a n u a l.
AUTO ON/OFF TIME SETTING MUTE VOL CC MENU Press the M E N U button and then use to select the T I M E menu. D or E ENTER button Clock Press the G button and then use select O f f T i m e or O n T i m e. or 3 Press the G button and then use D or E button to select O n. ■ To cancel the O n / O f f t i m e function, select O f f.
TIME SETTING SLEEP TIME SETTING POWER TV The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. INPUT PICTURE SOUND SAP TIMER 1 2 3 4 5 6 7 8 9 - 0 FAV ADJUST VOL 1 Press the T I M E R button repeatedly to select the number of minutes. First the O f f option appears on the screen, followed by the following sleep timer options : 10, 20, 30, 60, 90, 120, 180, and 240 minutes.
AUTO SHUT-OFF SETTING MUTE VOL CH CC MENU BACK EXIT If set to on and there is no input signal, the TV turns off automatically after 10 minutes. ENTER 1 Press the G button and then use select A u t o s l e e p. D D or or E E button Clock : Oct 19, 2007, 03:44 AM Off Time : Off On Time : Off Sleep Time : Off Auto sleep : Off button to 1 3 Press the G button and then use select O n or O f f.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific ratings. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1. Set ratings and categories to be blocked.
Set Password Change the password by inputting a new password twice. Lock System After inputting the password, use the D or E button to choose S e t p a s s w o r d. 1 Press the G button and then choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the C o n f i r m. Then your changed password has been memorized.
PARENTAL CONTROL /RATINGS MOVIE & TV RATING Movie Rating (MPAA) - for USA only Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. Lock System After inputting the password, use the choose M o v i e R a t i n g.
TV Rating Children - for USA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs. Lock System : Off Set Password Movie Rating TV Rating-Children TV Rating-General 1 2 After inputting the password, use the choose T V R a t i n g - C h i l d r e n.
PARENTAL CONTROL /RATINGS TV Rating English - for CANADA only Selecting canadian english language rating system. Lock System 1 After inputting the password, use the choose T V R a t i n g - E n g l i s h. D or E button to : Off Set Password TV Rating-English TV Rating-French 2 Press the G button and then use the D or E button to select E , C , C 8 +, G , P G, 1 4 +, 1 8 +, or B l o c k i n g O f f.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries.
APPENDIX The audio function does not work. Press the VOL or VOLUME button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the product ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS 20LS7D (20LS7D-UK) 20LS7DC (20LS7DC-UK) 23LS7D (23LS7D-UK) 23LS7DC (23LS7DC-UK) 19.7 x 15.8 x 6.9 inches 22.9 x 18.1 x 7.8 inches 499.4 x 401.2 x 175.1 mm 581.3 x 458.9 x 198.8 mm 19.7 x 14.0 x 2.9 inches 22.9 x 16.3 x 3.3 inches 499.4 x 355.0 x 72.9 mm 581.3 x 412.9 x 83.9 mm including stand 14.1 pounds / 6.4 kg 17.9 pounds / 8.1 kg excluding stand 13.2 pounds / 6.0 kg 16.1 pounds / 7.