LED TV LF45** www.lg.
i
1 1 2-B 2-A 28LF45** 3 24LF45**
5V B AUDIO IN (PC) USB IN 0.
B-1 LF45*0 HDMI IN RGB IN (PC) (MHL) COMPONENT IN L DC-IN (19 V ) L COMPONENT IN L L VIDEO AUDIO R COMPONENT IN R (MONO) (MONO) ANTENNA / CABLE IN R R L L VIDEO (MONO) (MONO) R R
LF45*0 (MHL) RGB IN (PC) USB IN 0.
B-2 LF45*D RGB IN (PC) HDMI IN COMPONENT IN DC-IN (19 V L ANTENNA / CABLE IN R ) L COMPONENT IN R COMPONENT IN L L VIDEO (MONO) R (MONO) AUDIO L R L VIDEO (MONO) (MONO) R R
RGB IN (PC) HDMI IN COMPONENT IN L ANTENNA / CABLE IN R ) L (MONO) R 5V DC-IN (19 V USB IN 0.
3 4 2 3 DC-IN (19 V ) 1 5 1 1 2 3 4 2 DC-IN (19 V ) : Depending on model / Selon le modèle / Dependendo do modelo /
6
A F E B G1 G2 D C 24LF4500-TF 24LF450D-TF 28LF4500-TF 28LF450D-TF A x B x C (mm) 556 x 375 x 130.5 641.5 x 424.5 x 158.8 A x E x F (mm) 556 x 343.1 x 53.1 641.5 x 395.8 x 57.6 D (kg) 3.4 4.3 3.3 4.2 D - ( G1 + G 2 ) (kg) 19 V 2.
*MFL68744851*
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. *MFL68761023* www.lg.
Safety instructions Please read these safety precautions carefully before using the product.
Keep the anti-moisture packing material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children. Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury.
ENGLISH If any of the following occur, unplug the product immediately and contact your local service centre. • The product has been impacted by shock • The product has been damaged • Foreign objects have entered the product • The product produced smoke or a strange smell This may result in fire or electric shock. Be careful in handling the adapter to prevent any external shocks to it. An external shock may cause damage to the adapter. CAUTION Install the product where no radio wave occurs.
Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock. Only use the specified type of battery. This could cause damage to the remote control. Please follow the installation instructions below to prevent the product from overheating. Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.
ENGLISH Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it, as it may cause damage to screen. Avoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen. When cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration.
Preparing Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking. Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).
ENGLISH Maintenance Lifting and moving the TV Cleaning your TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. Clean your TV regularly to keep the best performance and to extend the product lifespan. • Make sure to turn the power off and disconnect the power cord and all other cables first.
Using the joystick button (Image shown may differ from your TV.) • When your finger over the joystick button and push it to the up, down, left or right, be careful not to press the joystick button. If you press the joystick button first, you may not be able to adjust the volume level and saved programmes. ENGLISH You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right. NOTE Mounting on a table Joystick Button (Image shown may differ from your TV.
ENGLISH Using the kensington security system Mounting on a wall (This feature is not available for all models.) Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket.
Connections (notifications) CAUTION Wall mount Pad Back Cover Wall mount Pad Back Cover Standard screw : M4 x L10 Max. 8 mm Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. ENGLISH • Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur.
Other connections A ENGLISH Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided. USB port supports 0.5 A electric current. If you need more electric current in case of HDD, use the separate power adaptor. NOTE • Supported HDMI Audio format : Dolby Digital (32 kHz, 44.1 kHz, 48 kHz), DTS (44.1 kHz, 48 kHz), PCM (32 kHz, 44.
Licenses C D Accesses the AV devices connected with the HDMI cable through HDMI-CEC. Opens the SIMPLINK menu. Starts to record and displays record menu. (Depending on model) Control buttons ( ) Controls the MY MEDIA menus, Time MachineReady control or the SIMPLINK compatible devices (USB, SIMPLINK or Time MachineReady). Coloured buttons These access special functions in some menus. ( : Red, : Green, : Yellow, : Blue) (Backlight) Adjusts the brightness of the screen by controlling the screen backlight.
ENGLISH Settings To set advanced control Automatically Setting Up Programme Calibrates the screen for each picture mode; or adjusts picture settings for a special screen. First select a Picture Mode of your choice. SETTINGS SETUP SETTINGS PICTURE Expert Control Auto Tuning Automatically tunes the programmes. • If Input Source is not connected properly, programme registration may not work. • Auto Tuning only finds programmes that are currently broadcasting.
To set additional picture options To synchronize audio and video SETTINGS SETTINGS PICTURE Picture Mode Picture Option AUDIO AV Sync. Adjust [Depending on model] Adjusts detailed setting for images. Synchronizes video and audio directly when they do not match. • Noise Reduction : Eliminates noise in the picture. • MPEG Noise Reduction : Eliminates noise generated while creating digital picture signals.
SIMPLINK function description ENGLISH • Direct Play : Plays the multimedia device on the TV instantly. • Select multimedia device : Selects the desired device via the SIMPLINK menu to control it from the TV screen instantly. • Disc playback : Manages the multimedia device with the TV remote control. • Power off all devices : When you power off the TV, all connected devices are turned off.
Supported Video Formats Supported Audio Formats • File type : mp3 [Bit rate] 32 Kbps - 320 Kbps [Sample freq.] 16 kHz - 48 kHz [Support] MPEG1, MPEG2, Layer2, Layer3 • File Type : AAC [Bit rate] Free Format [Sample freq.] 8 kHz ~ 48 kHz [Support] ADIF, ADTS • File Type : M4A [Bit rate] Free Format [Sample freq.] 8 kHz ~ 48 kHz [Support] MPEG-4 • File Type : WMA [Bit rate] 128 Kbps ~ 320 Kbps [Sample freq.
To see web manual Troubleshooting To obtain detailed User Guide information, please visit www.lg.com. Cannot control the TV with the remote control. ENGLISH External control device setup To obtain the external control device setup information, please visit www.lg.com. • Check the remote control sensor on the product and try again. • Check if there is any obstacle between the product and the remote control. • Check if the batteries are still working and properly installed ( to , to ).
Specifications Environment condition Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % Digital TV (Depending on Country) Television system Programme coverage Maximum number of storable programmes External antenna impedance ENGLISH AC/DC Adapter Manufacturer : Lien Chang Model : LCAP21C Manufacturer : Honor Model : ADS-45EI-19 19040GPI, ADS-40LSI-19-2 19040G, ADS-45SN-19-3 19040G Manufacturer : APD Model : WA
HDMI-DTV supported mode ENGLISH Resolution 720 x 480 720 x 576 1280 x 720 1920 x 1080 Horizontal Frequency (kHz) 31.469 31.500 31.250 37.500 44.960 45.000 33.720 33.750 28.125 27.000 33.750 56.250 67.430 67.500 Component port connecting information Vertical Frequency (Hz) 59.940 60.000 50.000 50.000 59.940 60.000 59.940 60.000 50.000 24.000 30.000 50.000 59.940 60.000 RGB (PC) / HDMI (PC) supported mode Horizontal Frequency (kHz) 31.468 Vertical Frequency (Hz) 70.08 640 x 480 31.469 37.500 59.
(Only Jordan) WEEE ENGLISH Disposal of your appliance The symbol indicating separate collection for electrical and electronic equipment consists of the crossed-out wheeled bin.
For any Suggestion, Opinion, Complaints, Please Call 800 54 in UAE 0800 545454 in South Africa 080 100 54 54 in Morocco 19960 in Egypt 021 36 54 54 in Algeria Other countries, Please contact our local dealer or log into http://www.lg.com Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 EXTERNAL CONTROL DEVICE SETUP (PC) (PC) (TV) (TV) RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual. RS-232C IN (PC) (PC) (CONTROL & SERVICE) * For other models, connect to the USB port. * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 0 0 to Green : 64 Ack [j][ ][Set ID][ ][OK/NG][Data][x] 10. Sharpness (Command: k k) ►► To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu.
EXTERNAL CONTROL DEVICE SETUP 0 0 5th Band 1 0 1 0 0 20(decimal) Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ►► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number - 46 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel) Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). * Tune Command Examples: 1. Tune to the Analog cable (NTSC) channel 35.
EXTERNAL CONTROL DEVICE SETUP ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV ISDB-BS (Japan) 03 : ISDB-CS1 (Japan) 04 : ISDB-CS2 (Japan) 11 : CATV O 01 X X X 02 X X X 03 X O O [Data03][x] [t][ ][Set ID][ ][NG][Data00][x] 21 : AV2 41 : Component2 90 : HDMI1 92 : HDMI3 91 : HDMI2 93 : HDMI4 26. Extended 3D(Command: x v) (only 3D models) (Depending on model) ►► To change 3D option for TV.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 27. Auto Configure (Command: j u) (Depending on model) ►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
