Installation Manual

ENGLISH
22
DTV Channel Update
It is a mode to set whether to update DTV Channel automatically or not.
When is set to ‘Auto’, the function to update TV’s Channel map according to DTV Channel’s stream information.
When is set to ‘Manual’, the function to keep TV’s Channel map even though DTV Channel’s information is changed.
Power On Default
Set the channel to display and Volume Level, etc. when turn on power.
When is set to O, it is not applied to the subordinate Input, Channel, A/V Setting, Aspect Ratio menu.
When is set to On, it can set by entering the subordinate menu.
Input
• Set whether it is turned on by the set input source or by the last stored input source.
Channel
• Select start channel number if Input source’s value is TV.
A/V Setting
• If ‘A/V Setting’ is changed from ‘O’ to ‘On’, A/V parameters that are set before entering ‘Installation Menu’ are applied whenever turn on power.
Aspect Ratio
• The aspect ratio determines the default aspect ratio that the set returns to on power up.
Aux Source Setting
Set to On or O.
The Auxiliary (Input) Source Setting feature will enable or disable for each external input.
User cannot disable the current input.
Power Management
• The Power Management feature will turn o the TV if no input control command is received from either the Local or IR Key within a selected
hours.
-
Activity on either of these inputs shall reset the ‘Power Management’ timer.
-
This entry can be set to a value which is corresponding to the desired hours (1Hour to 7Hours).
-
Default value is 'Off'
Factory Reset
• Change all settings to their default values.