ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. LED TV 24LT660VBUA FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement. www.lg.
ENGLISH Read Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
Kg 24LT660VBUA 556 556 384.3 384,3 140.6 140,6 343.1 343,1 (21.8) (21,8) (15.1) (15,1) (5.5) (5,5) (13.5) (13,5) 53.1 (2.0) 53,1 (2,0) 3.7 (8.1) 3,7 (8,1) 3.5 (7.
*MFL71663202* (2001-REV01)
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 24LT660VBUA 28LT662VBUB 32LT662VBUC *MFL71402063* (2007-REV02) www.lg.com Copyright © 2019 LG Electronics Inc. All Rights Reserved.
Important Safety Instruction ENGLISH •• Read these instructions. •• Keep these instructions. •• Heed all warnings. •• Follow all instructions. •• Do not use this apparatus near water. •• Clean only with dry cloth. •• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. •• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Warning! Safety instructions CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ENGLISH •• Disconnecting the Device from the Main Power -- The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible. •• Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury. •• Outdoor Antenna Grounding (Can differ by country): -- If an outdoor antenna is installed, follow the precautions below.
Preparing •• When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute. •• Image shown may differ from your TV. •• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. •• The available menus and options may differ from the input source or product model that you are using. •• New features may be added to this TV in the future.
ENGLISH Optional Extras Lifting and Moving the TV Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain models. The model name or design may be changed due to the manufacturer’s circumstances or policies. (Depending upon model) When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
•• Use at least two people to move a large TV. •• When transporting the TV by hand, hold the TV as shown in the following illustration. •• Avoid touching the screen at all times, as this may result in damage to the screen. •• Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen. •• Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur.
Using the Kensington Security System (optional) Securing TV to the Wall ENGLISH (Depending upon model) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http:// www.kensington.com. Connect the Kensington security system cable between the TV and a table. (Depending upon model) 1 Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV.
Mounting on a Wall •• When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects. (Depending upon model) 10 cm 10 cm (4 inches) 10 cm m 10 c 10 cm Stand hole (Depending upon model) 9 ENGLISH An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model.
ENGLISH Connections Other connections You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each device. Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Antenna/Cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional.
External Speakers Method of volume control port (Depending upon model) •• Cable Spec. ENGLISH Each Up / Down pin is pulled to 3.3 V with CPU GPIO. or GND / UP / DOWN Control port for Speaker out CPU detects transition from 3.3 V to GND level for volume control. UP DOWN GND RIGHT LEFT GND : Depending upon model External Devices Supported external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
Using the Button Network setup (Depending upon model) ENGLISH You can simply operate the TV functions, using the button. Wired network connection This TV can be connected to a Pro:Centric server via the port. After making the physical connection, the TV needs to be set up for network communication. Connect the port of the Modem or Router from Pro:Centric server to the port on the TV.
Adjusting the Menu ENGLISH (Depending upon model) When the TV is turned on, press the button one time. You can adjust the Menu items using the button. Turns the power off. Changes the input source. Scrolls through the saved channels. Adjusts the volume level. Using Remote Control The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.
ENGLISH (Power) Turns the TV on or off. Accesses the Smart menu. Selects the remote’s operating mode: TV. Selects the remote’s operating mode: DVD. Changes the input source. Turns the TV off in a set amount of time. Number button Enters numbers. (Dash) Inserts a dash between numbers such as 2-1 and 2-2. (Space) Not functional. Tunes to the last channel or input viewed. Adjusts the volume level. Not functional. Selects a closed caption. Enables VD function.
Troubleshooting 15 ENGLISH The software may be updated for improvement in performance. The customer is responsible to ensure the compatibility of their equipment with any LG Electronics software. If needed, please consult with LG Electronics and update new software versions according to the guidance provided by LG Electronics. •• Cannot control the TV with the remote control. -- Check if anything such as tape has been placed over the receiver.
ENGLISH •• When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the guide panel. (Depending upon model) •• Make sure to wring any excess water or cleaner from the cloth. •• Do not spray water or cleaner directly onto the TV screen. •• Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.
To set additional picture options (Depending upon model) ( ) [Picture] [Picture Mode Settings] [Picture Options] Adjusts detailed setting for images. •• [Noise Reduction] Eliminates noise in the picture. •• [MPEG Noise Reduction] Eliminates noise generated while creating digital picture signals. •• [Black Level] Adjusts the brightness and contrast of the screen to suit the black level of the input picture by using the blackness (black level) of the screen.
Specifications Product specifications may be changed without prior notice due to upgrade of product functions. ENGLISH Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.).
HDMI (PC) supported mode (Use HDMI IN 1 for PC mode) 640 x 350 720 x 400 640 x 480 800 x 600 1024 x 768 1152 x 864 1360 x 768 HDMI (DTV) supported mode Resolution 640 x 480p 720 x 480p 720 x 576p 1280 x 720p Horizontal Vertical Frequency (kHz) Frequency (Hz) 31.46 59.94 31.50 60.00 31.47 59.94 31.50 60.00 31.25 50.00 37.50 50.00 44.96 59.94 45.00 60.00 Composite / AV supported mode Resolution 720 x 480i 720 x 480p Horizontal Vertical Frequency (kHz) Frequency (Hz) 15.73 59.94 15.75 60.00 31.47 59.
Supported Video Formats Extension ENGLISH .asf .wmv Video Audio Video .avi Audio .mp4 .m4v .mov .3gp .3g2 Video Audio Video Audio Video .mkv Audio .ts .trp .tp .mts .mpg .mpeg .dat Video Audio Video Audio Video .vob 20 Audio Codec VC-1 Advanced Profile (Except for WMVA), VC-1 Simple and Main Profiles WMA Standard (Except for WMA v1/ WMA Speech) Xvid (Except for 3 warp-point GMC), H.
KEY CODES * This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP * Image shown may differ from your TV. * The connection interface may differ from your TV. RS-232C Setup •• Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. •• Connect the serial port of the control device to the RS232C jack on the product back panel. NOTE •• The type of control port on the TV can be different between model series.
Connector type: D-Sub 9-pin male 5 6 ENGLISH 1 9 RS-232C (Serial port) RS-232C configurations 7-Wire Configurations 3-Wire Configurations (Standard RS-232C cable) (Not standard) PC TV PC RXD 2 3 TXD RXD TV 2 3 TXD TXD 3 2 RXD TXD 3 2 RXD GND 5 5 GND GND 5 5 GND DTR 4 6 DTR DTR 4 6 DTR DSR 6 4 DSR DSR 6 4 DSR RTS 7 8 RTS RTS 7 8 RTS CTS 8 7 CTS CTS 8 7 CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID For Set ID number, see “Real data mapping
Communication Parameters ENGLISH •• Baud rate : 9600 bps (UART) •• Data length : 8 bits •• Parity : None •• Stop bit : 1 bit •• Communication code : ASCII code •• Use a crossed (reverse) cable.
TRANSMISSION / RECEIVING PROTOCOL * (Depending upon model) ENGLISH Transmission (Command1)(Command2)( )([Set ID])( )(Data)(Cr) (Command 1) : First command to control the TV. (j, k, m or x) (Command 2) : Second command to control the TV. ([Set ID]) : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
1 Power (Command: k a) ►►To control power on or off of the set. Transmission ENGLISH (k)(a)( )([Set ID])( )(Data)(Cr) Data 00 : [Off] Data 01 : [On] Ack (a)( )([Set ID])( )(OK/NG)(Data)(x) ►►To show TV is power on or off. Transmission (k)(a)( )([Set ID])( )(FF)(Cr) Ack (a)( )([Set ID])( )(OK/NG)(Data)(x) * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. * OK Ack., Error Ack.
10 [Sharpness] (Command: k k) ►►To adjust screen contrast. You can also adjust contrast in the picture settings. ►►To adjust the screen sharpness. You can also adjust sharpness in the picture settings.
ENGLISH 13 [Treble] (Command: k r) 17 [Equalizer] (Command : j v) (Depending upon model) ►►Adjust EQ of the set. ►►To adjust treble. You can also adjust Treble in the audio settings. Transmission Transmission (k)(r)( )([Set ID])( )(Data)(Cr) Data Min : 00 to Max : 64 (j)(v)( )([Set ID])( )(Data)(Cr) MSB 0 LSB 0 0 0 0 0 0 0 Ack (r)( )([Set ID])( )(OK/NG)(Data)(x) 14 [Bass] (Command: k s) (Depending upon model) ►►To adjust bass. You can also adjust Bass in the audio settings.
19 Input select (Command: x b) (Main Picture Input) ►►To select input source for main picture.
IR OUT Using Guide ENGLISH Suitable / Not Recommend remote-controller data format Item Data format code Note NEC, Toshiba Full Repeat Code Format Philips RC5, RC6 Code Format Zenith Code Format Matsushita, RCA Code Format Sony 12/15/20 bit, Mitsubishi Code Format Suitable Data Format Not Recommend Data Format Single : Enable Repeat : Enable Single : Enable Repeat : Disable Single : Disable Repeat : Disable Sharp, JVC, R-step, Philips RCMM, RECS-80, XMP Code Format IR Receiver specifications Carrier
Open Source Software Notice Information Updating Firmware (Depending upon model) You can update the firmware for the product by downloading the latest firmware. 1 Download the latest firmware at partner.lge.com. (Signing up for a membership and log-in required) 2 Create a folder named “LG_DTV” or “lg_dtv” on a USB memory device. 3 Move the downloaded file to the folder that you have created on the USB memory device. Supported licenses may differ by model. For more information about licenses, visit www.lg.
Regulatory ENGLISH FCC Notice (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RSS-247 Requirement (For Canada) [For having wireless function (WLAN, Bluetooth,...)] This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
NOTE TO CABLE/TV INSTALLER ENGLISH (For USA and Canada) This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. WARNING! Never place a television set in an unstable location.
ENGLISH CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Supplier’s Declaration of Conformity Trade Name LG Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632 E-mail lg.environmental@lge.com The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. MODEL SERIAL NO. LG Customer Information Center For inquires or comments, visit www.lg.
