LED TV LV761* AAA X2 24LV761* X1 28LV761* : Depending on model / Závisí na modelu / En función del modelo / selon le modèle / Abhängig vom Modell / Ανάλογα με το μοντέλο / In base al modello / Zależnie od modelu / Dependendo do modelo / В зависимости от модели / / Modele bağlı olarak değişkenlik gösterebilir / Залежно від моделі www.lg.
1 2 3
ANTENNA/ CABLE IN HDMI IN HDMI IN/ARC USB IN H/P OUT
Satellite IN PCMCIA CARD SLOT OPTICAL DIGITAL AUDIO OUT AV IN COMPONENT IN
AV IN VIDEO L/MONO AUDIO R COMPONENT IN AUDIO VIDEO
HDMI-DVI IN AV IN AUDIO OUT HDMI IN DVI OUT
1 2 3 4
0 1 2 A E D B G F A B C C D E F F G 24LV761H-ZB 556 384.3 140.6 343.1 53.1 3.7 3.5 28LV761H-ZB 641.5 430 175 395.8 57.6 4.95 4.
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.
Warning! Safety instructions ENGLISH CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
•• Only use an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction or product deformation. •• Never Disassemble the AC adapter or power cord. This may result in fire or electric shock. •• Be careful in handling the adapter to prevent any external shocks to it. An external shock may cause damage to the adapter. •• Make sure the power cord is connected securely to the power plug on the TV.
ENGLISH •• Signal from Remote Control can be interrupted due to external/ internal lighting eg Sunlight, fluorescent lighting. If this occurs turn off lighting or darken viewing area. •• When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product. •• Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet.
Preparing B B A A ENGLISH •• If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes. (Depending on model) •• Image shown may differ from your TV. •• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. •• The available menus and options may differ from the input source or product model that you are using. •• New features may be added to this TV in the future.
ENGLISH •• Do not use any unapproved items to ensure the safety and product life span. •• Any damage or injuries caused by using unapproved items are not covered by the warranty. •• Some models have a thin film attached on to the screen and this must not be removed. •• When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. •• Make sure that the screws are fastened completely.
Using the button Basic functions (Depending on model) ENGLISH Power On (Press) Power Off1 (Press and hold) You can simply operate the TV functions, using the button. Volume Control Programmes Control Power On (Press) Power Off1 (Press and Hold) Menu Control (Press2) Menu Selection (Press and Hold3) or 1 All running apps will close, and any recording in progress will stop. 2 You can access and adjust the menu by pressing the button when TV is on.
ENGLISH Mounting on a table Attaching the TV to a desk 1 Lift and tilt the TV into its upright position on a table. • Leave a 10 cm (minimum) space from the wall for proper ventilation. (This feature is not available for all models.) The TV should be attached to a desk so it cannot be pulled in a forward/ backward direction, potentially causing injury or damaging the product. 10 cm 10 cm 10 cm 10 cm 10 cm 2 Connect the power cord to a wall outlet.
Adjusting the angle of the TV to suit view (This feature is not available for all models.) (This feature is not available for all models.) •• Image shown may differ from your TV. The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www. kensington.com. Connect the Kensington security system cable between the TV and a table.
Separate purchase (Wall mounting bracket) ENGLISH Model 43UV76** 43UV66** 32/43LV76** 43LV66** 32/43LV641* 43LV640* 49/55UV76** 49/55UV66** 49/55LV76** 49LV66** 49/55LV640* VESA (A x B) (mm) 200 x 200 300 x 300 Standard screw M6 M6 Number of screws 4 4 Wall mount bracket LSW240B MSW240 LSW350B MSW240 Model 24LV76** 28LV76** VESA (A x B) (mm) 75 x 75 100 x 100 Standard screw M4 X L10 M4 X L10 Number of screws 4 4 Wall mount bracket LSW140B LSW140B Model 65UV76** VESA (A x B)
Connections (notifications) •• The external device connection may differ from the model. •• Connect external devices to the TV regardless of the order of the TV port. •• If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device. •• Refer to the external equipment’s manual for operating instructions.
Speaker output setup Method of volume control port (Depending on model) (Depending on model) •• Cable Spec. ENGLISH Each Up / Down pin is pulled to 3.3 V with CPU GPIO. EXTERNAL SPEAKER OUT or STEREO (8 ) GND / UP / DOWN CPU detects transition from 3.3 V to GND level for volume control. VOLUME CONTROL Control port for Speaker out + UP - DOWN GND RIGHT LEFT GND : Depending on model •• Use only with the 3 Pole 3.5 mm Stereo Jack.
Other connections Wired network connection Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided. (Depending on model) •• This TV can be connected to a Pro:Centric server via the LAN port. After making the physical connection, the TV needs to be set up for network communication. Connect the LAN port of the Modem or Router from Pro:Centric server to the LAN port on the TV.
Remote control ENGLISH (Some buttons and services may not be provided depending on models or regions.) The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
(Depending on model) ENGLISH (POWER) Turns the TV on or off. Selects Radio, TV and DTV programme. Recalls your preferred subtitle in digital mode. Selects an AV mode. Resizes an image. (INPUT) Changes the input source. Number buttons Enters numbers. Alphabet buttons Enters letters. Accesses the saved programmes list. (Space) Opens an empty space on the screen keyboard. Returns to the previously viewed programme. Adjusts the volume level. Shows the previous history. Shows programme guide.
Troubleshooting Supported licenses may differ by model. For more information about licenses, visit www.lg.com. The software version can be updated for improvement in performance. Customer needs to ensure the compatibility of customer’s equipment with LGE software. If needed, please consult with LGE and upload revised software version according to the guidance provided by LGE. Cannot control the TV with the remote control. Manufactured under license from Dolby Laboratories.
Abnormal display Generated sound •• “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. •• Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.
CI Module (W x H x D) ENGLISH Environment condition 100.0 mm x 55.0 mm x 5.
HDMI/DVI-DTV supported mode Resolution 720 x 480 720 x 576 1280 x 720 1920 x 1080 1920 x 1080 1 3840 x 21601 4096 x 21601 1 Only UV76**, UV66** Vertical Frequency (Hz) 59.94 60.00 59.94 60.00 50.00 59.94 60.00 50.00 50.00 59.94 60.00 23.97 24.00 29.97 30.00 50.00 59.94 60.00 120 119.88 100 23.98 24.00 25.00 29.97 30.00 50.00 59.94 60.00 23.98 24.00 25.00 29.97 30.00 50.00 59.94 60.00 •• PC audio is not supported.
Component port connecting information Component ports on the TV ENGLISH Video output ports on DVD player Audio format Item Info PB PR Y PB PR Y B-Y R-Y Y Cb Cr Pr Bit rate - Sample freq. 8 kHz - 96 kHz Y Pb .mp3 .wav Bit rate 32 Kbps - 320 Kbps Sample freq. 16 kHz - 48 kHz Support MPEG1, MPEG2 channels mono, stereo Support PCM channels mono, stereo O Bit rate 64 kbps - 320 kbps 720p / 1080i O Sample freq.
Video codec Extension Video VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (except for WMA v1/ WMA Speech) Video Xvid (except 3 warp-point GMC), H.264/ AVC, Motion Jpeg, MPEG-4 Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS .avi .mp4 .m4v .mov .3gp .3g2 Video H.264/AVC, MPEG-4, HEVC Audio Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3) Video H.
IR CODES • This feature is not available for all models.
ENGLISH RS-232C Setup (Depending on model) RS-232C IN (CONTROL & SERVICE) (PC) (PC) Connect the serial port of the control device to the RS-232C jack on the product back panel. (TV) 1 3 (PC) (PC) 4 2 RS-232C IN (TV) (TV) (CONTROL & SERVICE) Type of Connector : D-Sub 9-Pin Male 1 6 No. (*Not provided) (TV) * The connection interface may differ from your TV. • RS-232C connection cables are not supplied with the product.
RS-232C Configurations Command Reference List (Depending on model) 7-Wire Configurations (Standard RS-232C cable) RXD TXD GND DTR DSR RTS CTS PC 2 3 5 4 6 7 8 TV 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) RXD TXD GND DTR DSR RTS CTS PC 2 3 5 4 6 7 8 TV 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 Communication Parameters • • • • • • Baud rate: 9600 bps (UART) Data length: 8 bits Parity : None Stop bit: 1 bit Communication
Transmission / Receiving Protocol (Depending on Model) ENGLISH Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
03. Screen Mute (Command: k d) ►To ► select screen mute on/off. Data 00 : Screen mute off (Picture on) Video mute off 01 : Screen mute on (Picture off) 10 : Video mute on Ack [d][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD. 04. Volume Mute (Command: k e) ►To ► control volume mute on/off. You can also adjust mute using the MUTE button on remote control.
09. Tint (Command: k j) ►To ► adjust the screen tint. You can also adjust tint in the PICTURE menu. ENGLISH Transmission [k][j][ ][Set ID][ ][Data][Cr] * Refer to Real data mapping 10. Sharpness (Command: k k) ►To ► adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] * If you are not using the remote control, use this mode. When main power is on/off, external control lock is released.
15. Energy Saving (Command: j q) ►To ► reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.
Channel data range Min : 00 Max : 270F (0 to 9999) ENGLISH Ack [a][ ][Set ID][ ][OK/NG][Data][x] 19. Programme Add/Skip (Command: m b) ►To ► set skip status for the current Programme. Data Structure MSB LSB 0 01 : Add 20. Key (Command: m c) ►To ► send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] 0 0 IR CODES 21.
* Real data mapping 00 : Step 0 Step 10 (Set ID 10) F: 10 : Step 15 (Set ID 15) Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : 74 : Step 115 Step 116 CF : Step 199 FE : FF : Step 254 Step 255 ENGLISH A: 9
