Owner’s Manual

9
ENG
ENGLISH
Setting up the Monitor set
Attaching the Stand Base
y
To protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
1
2
3
y
To avoid injury to the fingers and foot when
Assembly Stand Body and Base, should hold
Base when assembly stand body and base.
y
Illustrations in this document represent typical
procedures, so they may look different from
the actual product.
y
Do not carry the monitor upside down by just
holding the stand base. This may cause the
monitor to fall off the stand and could result in
personal injury.
y
When lifting or moving the monitor, do not
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
y
Do not apply foreign substances (oils,
lubricants, etc.) to the screw parts when
assembling the product. (Doing so may
damage the product.)
y
Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be
covered by the product warranty.
CAUTION
y
You can disassemble the stand in the reverse
order of the assembly.
NOTE
WARNING