LCD TV MODEL: 26LC2D OWNER'S MANUAL Internet Home ENERGYSTAR is guidelines a issued set of by Page : http://www.lge.com http://www.lg.ca power-saving the U.S. Environmental Protection Please read this manual Agency(EPA). an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets GY STAR energy before operating your set. Record model number and serial number of the set. See the label attached As carefully Retain it for future reference.
Warning W Warning CAUTION WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within "dangerous voltage" the presence of uninsulated cient magnitude to constitute a an equilateral triangle, is intended to alert the user product's enclosure that may be of suffi- to within the risk of electric shock to persons.
Safety Instructions Instructions Safety WARNING : To reduce the risk of fire Apparatus shall not be or electric exposed to shock, do dripping or not expose this splashing and apparatus no objects to rain or filled with moisture. liquids, such as vases, shall be placed on the apparatus. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 8. Do not install near heat Owne r ' s Manu al 2. Keep these instructions. 3.
Safety Instructions 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. 14. Refer all servicing to qualified service personnel.
Contents Contents Contents Introducin 2 Warning 3~4 Safety 7 Accessories / 8 Controls 9 Connection 10~11 Remote Control Extras Options Function Key Attaching the TV to a wall Desktop Pedestal Installation 14 Basic Connection 15 Antenna 16~17 VCR External 18~19 DVD Equipment 20~21 Connections operation Setup Menu Options Video Menu Options Cable Connection or Setup Setup HDSTB Setup 22 External AV Source 22 AV Out Setup 24~26 Setup Digital Audio Output PC Setup 27
Contents Operation Refrnce 6 41 Manual Clock 41 Auto Clock 42 On/Off Setup Setup Timer Setup Timer 42 Sleep 43 Auto Off 44 46 Aspect Ratio Control Caption/Text Caption Option 47~48 Parental Lock 49~53 External Control Device 54~55 IR Codes 56 Programming the Remote 57~58 Programming Codes 59~60 Troubleshooting 61 Maintenance 62 Product 45 Setup Setup Checklist Specifications
Introduction Introduction Accessories Ensure that the following accessories are included with your product. If any accessory is contact the dealer from where you purchased the product. User must use shield signal interface cable (D-sub 15 pin cable) with ferrite compliance for the cores missing, please to maintain the standard product.
Introduction Controls Controls - - This is of front This somewhat different from your TV. a simplified representation picture shown below may be panel. CH CHANNEL (D, E) Buttons VOL VOLUME (F,G) Buttons ENTER Button ENTER MENU MENU Button INPUT INPUT Button R (Power) Remote Control Sensor Power/Standby ? Indicator illuminates red in standby mode. ? 8 illuminates green when the set is switched on.
Introduction Connection Connection This - picture Options Options shown below may be somewhat different from your TV. S-VIDEO Input Provides better video picture quality than the input. VIDEO Input Connects the video signal from a video device. AUDIO 11 Input Connections are available for stereo sound from listening to external device.
Introduction Remote Control Control TV INPUT In AV 1-2, input Key Functions Component 1-2, RGB-PC, sources, screen HDMI1/DVI or HDMI2 returns to the last TV channel. INPUT MODE TV INPUT External input modes rotate in regular sequence: TV, AV1-2, Component 1-2, RGB-PC, HDMI1/DVI or HDMI2. (AV 1-2, Component 1-2, RGB-PC HDMI1/DVI or HDMI2 input sources are linked automatically, only if these are connected.
Introduction TV, DVD, VCR Selects the remote mode: operating COMP1 Directly, select Component1 input. COMP2 Directly, select Component2 input. HDMI Directly, select HDMI1/DVI RGB-PC Directly, select RGB EZ PIC EZ SOUND ADJUST INFO VCR/DVD control buttons EXIT CC Adjust the Select the Adjust the Display of sound for appropriate type screen position, size, information at the on-screen Select closed Displays SAP Analog and top of the displays caption.
Installation Installation Attaching the TV to a a wall wall We recommend that you set up the TV close to a wall so it cannot fall over if Additionally, we recommend that the TV be attached to a wall so it cannot be tially causing injury damaging or Caution: Please make Insert the * If your eye-bolts (or product sure the product. that children don't climb TV brackets and has the bolts in the bolts) Ensure the height eye-bolts or to on or tighten the from the TV.
Installation Desktop Pedestal Installation For proper ventilation, allow a clearance of 4inches on each side from the wall. 4 inches 4 inches 4 inches 4 inches CAUTION G Ensure This picture adequate ventilation by following the clearance recommendations. shown below may be somewhat different from your TV. Power Supply Short-circuit Breaker GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock.
Basic Connection Connection Connect the cables as necessary. the cables neatly, arrange the cables to the Cable Holder. 1 After connecting To connect External an additional equipment equipment, see the Connections section. Cable holder Reinstall the CABLE MANAGEMENT 2 CABLE MANAGEMENT as shown. Bundle the cables 3 using the supplied twister holder. How to remove the CABLE MANAGEMENT - and pull it MANAGEMENT upward.
Installation External NOTE: Connections Equipment Connections All cables shown are not included with the TV Antenna Or Cable Connection Analog - - and Antenna For Digital or TV signals provided Cable Service without a optimum picture quality, adjust on antenna Cable Box Connection. antenna direction if needed. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket AN ENNA/ CABLE N RF Coaxial Wire (75 ohm) VHF Antenna Turn clockwise to tighten.
Installation VCR - - To avoid picture Typically a noise frozen still (interference), picture from of the screen may remain visible When connecting with on leave an adequate VCR. If the 4:3 a the Setup distance between the VCR and TV. picture format is used; the fixed images on the sides screen. antenna an 1 2 VCR Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN socket on the set.
Installation When with connecting an S-Video cable VCR ANT IN OUT S-VID 1 (AUDIL)VEO OUTP SWITC 34 IN 1 2 2 Connect the S-VIDEO output of the VCR VIDEO set. The input on the improved; compared cable) input. ANT OUT 3 Connect the audio AUDIO input jacks Insert video on V a the VCR. to normal to the S- picture quality is composite (RCA outputs of the VCR on to the the set. tape into the VCR and press PLAY (Refer to the VCR owner's manual.
Installation DVD When connecting with Setup S-Video cable a DVD S-VIDEO (R) AUDIO 1 (L) 2 MONO 1 Connect the S-VIDEO 2 Connect the audio 3 Turn 4 Select AV 1 input source with using the INPUT button If connected to AV I N 2 select AV 2 input source. on the DVD output of the DVD outputs of the DVD insert player, a to the S-VIDEO to the AUDIO input on input jacks the set. on the set. DVD. on the remote control.
Installation When connecting with component cable a B (R) R 1 AUDIO (L) DVD 2 COMPNET MONO 1 Connect the video outputs (Y, PB, PR) of the DVD 2 Connect the audio outputs of the DVD 3 Turn 4 Select - 5 on the DVD player, Component 1 insert input a ? player's source Component Input ports get better picture quality, Component ports Video on on the TV output ports DVD player with using the INPUT button on 2, select Component 2 input manual for To to the COMPONEN
Installation HDSTB - This TV can receive Setup Digital Over-the-air/Cable signals without an external digital set-top box. However, if signals from a digital set-top box or other digital external device, refer to the figure you do receive Digital as shown below. When connecting with a HDMI cable SERV CE PC) REMOTE 1 Connect the HDMI output of the digital set-top boxtotheHDMIIN1(DVI)or2jackontheset.
Installation When connecting with a HDMI to DVI cable SERV CE PC) REMOTE CONTROL DVI-DTV OUTPUT (R) AUDIO Digital Set-top Connect the DVI 2 Connect the audio 3 Turn 4 Select HDMI1/DVI ? ? ? on If the the output of the digital set-top box outputs of the set-top box digital set-top input digital set-top box.
Installation External AV Source Setup Connect the AUDIO/VIDEO jacks between TV equipment. Match the jack colors white, and Audio (Video yellow, Audio Left Right red). 1 and external = = = Select AV2 2 button on input source If connected to AV I N 1 - with using the INPUT the remote control. select AV1 input, input source. 1 Operate 3 the corresponding external equipment. equipment operating guide.
Installation Digital - Send the TV's audio to external audio Audio Output equipment (stereo system) 1 Connect Digital OUT 2 via the one Audio Digital end of Audio optical cable Optical Output port. an Connect the other end of the digital audio Output Optical port. optical input on to the TV cable to the optical the audio equipment. MONO 3 1/2 See the external audio equipment instruction operation.
Installation PC - This TV When provides Plug connecting and with a Setup Play capability, meaning D-sub 15 pin that the PC Connect the RGB RGB N (PC) DMN to the TV's settings. cable 1 SERV CE adjusts automatically (PC) jack output of the PC to the RGB IN the set. Connect the PC audio 2 OOL on (RGB/DVI) jack on outputs to the AUDIO IN the set. AN ENNA CABLE N CONTROL & SERV CE 3 Turn 4 Select on the PC and the set.
Installation 1. Depending not work if on a the DOS mode may graphics card, HDMI to DVI Cable is in Check the 5. 2. When Source Devices connected with HDMI/DVI PC Resolution Input, output WXGA), Position Position of TV SET and contact graphics 3. card service center. When Source Devices connected with HDMI/DVI Input, output TV SET Resolution (480p, 720p, 1080i) and TV SET Display fit EIA/CEA-861-B Specification to Screen.
Installation Screen - - - * Setup for PC mode When RGB connect to PC input and select the RGB-PC, this function is used. input and select HDMI/DVI input, this function is used. or HDMI/DVI to PC input and checking the screen quality.
Operation Operation Operation Basic operation operation Turning 1. First, In connect power cord standby correctly. This TV is the TV At this moment, the TV switches to the TV press the POWER, TV or ~ . , viewing source by using TV INPUT, INPUT button on the remote control. programmed to remember which power state it was last set to, even if the using the TV, press the POWER button Volume on standby mode. Adjustment 1.
Operation On On Screen Menus Selection and How to adjust the OSD 1. Press the MENU button and then D / E button to select each 2. Press the G button and then use D/E / F / G button to Adjustment screen menu. display the available menus.
Operation Menu Setup Setup Options Options EZ Scan (Channel Search) EZ Scan EZ Scan Manual Scan Manual Scan Channel Edit Channel Edit DTV DTV Signal Input Source Selection ( G or) G leads you to the EZ scan screen. EZ Processing scan... Signal TV Ch.20 Source Input 0 Input Label Input Label Set ID Set ID channel(s) found Press to current stop the scan and start DIGITAL ANTENNA channel scan.
Operation Menu Setup Setup Options Options continued continued Channel Edit EZ Scan EZ Scan Manual Scan Manual Scan Channel Edit Channel Edit DTV Signal Input DTV Source Input There - are Input Label Set ID Set ID two different ways in order to add or delete scanned channels. One is "Custom List" and the other is "Favorite List" in the channel list. Both of them are available after EZ Scan the SETUP - on toggling can be created each channel with ENTER button.
Operation DTV Signal Strength EZ Scan EZ Scan Manual Scan Manual Scan Channel Edit Channel Edit DTV Input - Bad Input Source Input Label Set ID Set ID adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degrada- 1 Press the MENU button and then 2 Press the G button and then 3 View the being tion.
Operation Setup Setup Menu Options Options continued continued Input Label EZ Scan EZ Scan Manual Scan Manual Scan Channel Edit DTV Cable Box AV2 VCR Channel Edit DTV Source Signal Input Component2 Source Input Label Input Label Set ID Set ID Sets a label to each input source lets you skip the input source which is not in use when you Set Top RGB-PC G HDMI1/DVI 1 Press the MENU button and then 2 Press the G button and then use Box PC Game Satellite HDMI2 - DVD C
Operation V V ideo Menu Options Options Auto Picture Control - EZ Picture picture adjusts the TV for the best value in the EZ Picture on - the program are quality factory repeatedly to select the picture appear- shown below: as User 1 and User 2 (your own set- tings). category.
Operation V V ideo Menu Manual Color Options Options continued continued Temperature Control EZ Picture EZ Picture Color Temperature Color Temperature XD XD Medium Advanced Advanced Warm Video Reset Video Reset User Cool Selection ( G G ) leads or to the detailed you setting screen. Red User 0 E Red 0 Green 0 Blue 0 Press - can also adjust the detailed set tings (Red, Green, Blue) by selecting MENU G to confirm. You the User 1 menu.
Operation XD - EZ Picture EZ Picture Color Temperature Color Temperature XD XD Advanced Advanced Video Reset Video Reset XD is LG Electronic's unique picimproving technology to display a real HD source through an advanced dig-ital signal processing algorithm.
Operation V V ideo Menu Options Options continued continued Advanced-Cinema 3:2 Mode EZ Picture EZ Picture Color Temperature Color Temperature XD XD Advanced Advanced Video Reset - G Black Level Video Reset Set up the TV for the best picture appearance for viewing movies.
Operation Video Reset EZ Picture EZ Picture Color Temperature Color Temperature XD XD Advanced Advanced Video Reset Video Reset Selection ( G G the - Use to menu quickly reset all the Video options to their original fac- tory preset values. 1 Press the MENU button and then 2 Press the G button and then 3 Press the G button to reset the Video use use or ) resets to factory settings (default). D/E button to select the VIDEO menu. D / E button to select Video Reset.
Operation Audio Menu Options Options Audio Audio Language Audio Language EZ Sound EZ Sound Balance Balance TV Speaker TV Other languages may be available digital signal is provided by the - Language if a 1 G English Spanish French Speaker Press the MENU button and then AUDIO use D / E button to select the menu. broadcasting station.
Operation Manual Sound Control Audio Language EZ Sound Balance TV Speaker BBE (EZ Sound-User option) User Normal Stadium Treble 50 News Bass 50 Music Front Surround G Off Theater User G Selection ( G or to the detailed ) leads you setting screen. Press - Adjust ence the sound in your preferand surrounded environ- 1 MENU Press the MENU button and then AUDIO to confirm. use button to select the D/E menu. ment.
Operation Audio Menu Options Options continued continued Balance - Adjust the sound in your preference and surrounded environment. Audio Language Audio Language EZ Sound EZ Sound Balance TV 1 2 Balance Speaker TV Press the MENU button and then select the AUDIO use L 0 R Speaker D / E button to menu. Press the G button and then use D / E button to select use F / G button to make Balance.
Operation T ime Menu Options Options Manual Clock Auto Clock Auto Clock Manual Clock Manual Clock Off Timer Off Timer On Timer Sleep If current time reset the clock Year G Timer Sleep ---- Date - -/- - Time--:-- On Timer Auto Off - Setup -- Timer Auto Off setting is manually. wrong, 1 2 Press the MENU button and then Press the G use button and then D/E button to select the TIME button to select Manual / E D use menu. Clock.
Operation T ime Menu Options Options continued continued On/Off Timer Auto Clock Setup Auto Clock Manual Clock Manual Clock Off Timer Off Timer On Timer On Timer Sleep Timer Off G On Sleep Timer Auto Off Time6:30AM Auto Off Ch. Vol Timer function - operates only if current time has been set. Off-Timer function overrides On- - 1 2 Press the MENU button and then Press the G button and then 2-0 17 D/E button to select the TIME use use TV D / E button to select menu.
Operation Auto Off Auto Clock Auto Clock Manual Clock Manual Clock Off Timer Off Timer On Timer On Timer Sleep TV will be automatically turned off in case of No for 10 minutes. Signal Sleep Timer Timer Auto Off Auto Off G Off On -IftheTVisonandthereisno input signal, the automatically after TV turns off 10 minutes. 1 Press the MENU button and then 2 Press the G button and then use D/E button to select Auto Off.
Operation Menu Features Option Option Aspect Set Ratio Control Horizon by program Selects the proper source's picture proportion to match the The image. (4:3 screen create 4:3) (16:9 a size is, more spectacular enlarged at both sides, to view. 16:9) Horizon Set Set By Program By Program Zoom 1 4:3 Choose Zoom 1 when you want to view the Choose 4:3 when you want to view original 4:3 a picture with without any alteration. an aspect ratio.
Operation Caption/Text * Analog Broadcasting System Captions Aspect Ratio Aspect Ratio Caption/Text Caption/Text Caption Option Caption Option CC2 Language Language CC3 Off G CC1 CC4 Text 1 Text 2 Text 3 Text 4 - - - Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen.
Operation Option Option Menu Features continued continued Caption Option Aspect Ratio Aspect Ratio Style Custom Caption/Text Caption/Text Size A Standard Caption Option Caption Option Font Font 0 Language G Text Color Language Text Bg Color Black Bg Opacity Solid Edge Type None Edge - Customize the DTV/CADTV captions that appear on your screen.
Operation Lock Menu Parental Control Options Options be used to block can The Parental Control Function the viewing sources. and by function, the following categories (V-Chip) setting this must be done 1. Set ratings and categories Specify a password 2. and other is used to block program viewing based on the ratings sent by the broadcastis to allow all programs to be viewed. Viewing can be blocked by the type of program chosen to be blocked.
Operation Parental Lock Setup Lock System Lock System Set Password Off G On Set Password Block Channel Movie Block Channel Rating TV Rating-Children Movie TV Rating-General TV Rating-Children TV Rating-General Input Block Rating Input Block - Set up blocking schemes to block specific channels, ratings, and external viewing 1 Press the MENU button and then menu. sources. ? ? - A password is required access to this System is turned menu to gain if the Lock 2 on.
Reference External Control Control Device Setup Setup - Connect the RS-232C input jack to an external externally. control device (such as a computer or an A/V control system) and control the Monitor's functions - - Connect the serial port of the control device RS-232C connection cables RS-232C are not to the RS-232C jack on the TV back panel. with the TV. supplied Setup RGB N R O O RSN CO E PC T ype of Connector; Connector; D-Sub 9-Pin Male ype of No.
Reference Set Set ID Use this function to - Refer to 'Real Data - specify a TV ID number. Mapping'. See page 51. EZ Scan Manual Scan 1. Press the MENU button and then SETUP D/E use button to select the Channel Edit menu. Signal DTV 2. Press the G button and then use D / E 3. Press the G button and then use button to select Set ID. D/E button to choose the desired TV ID number. The adjust adjustment Input Source Input Label Set ID to range of Set ID Set ID 1 G is1~99. 4.
Reference 01. Power (Command2:a) 05. Volume Mute G To control Power On/Off of the TV. You Transmission 0 mute on/off. adjust mute using the MUTE button on Transmission Power Off : also can remote control.
Reference 09. Color (Command2:i) G To adjust the You can also 13. Remote Control Lock Mode color. screen G To lock the color in the Video adjust menu. Transmission Refer to 'Real data Data mapping'. See page 51. Acknowledgement 0: Lock off can also adjust You tint. screen can also adjust treble in the Audio menu. menu.
Reference 18. Tune Command G To tune channel to (Command: 19.
Reference IR Codes Codes G Connect your wired remote control to the Remote Control port on the TV. G Output waveform Single pulse, modulated with 37.917KHz at 455KHz signal TC Carrier frequency FCAR 1/TC Duty T1 = ratio = = fOSC/12 T1/TC 1/3 = G Configuration of frame ? 1st frame Lead Low High code custom code custom code Data code Data code C0 C1C2C3C4C5C6C7C0C1C2C3C4C5C6C7D0D1D2D3D4D5D6D7D0D1D2D3D4D5D6D7 ? Repeat frame Repeat code Tf G Lead code 9ms 4.5 ms 0.
Reference 0B INPUT R/C Button 0F TV INPUT R/C Button 98 MULTIMEDIA R/C Button 08 POWER R/C Button C4 POWER ON Discrete IR Code C5 POWER OFF Discrete IR 79 RATIO R/C Button 0E TIMER 10~19 Number 4C (Power On/Off) (Only Power On) Code (Only Power Off) R/C Button Key 0~9 R/C Button (Dash) R/C Button 1A FLASHBK R/C Button 09 MUTE R/C Button 02 VOL R/C Button 03 VOL E R/C Button 00 CH D R/C Button 01 CH E R/C Button 1E FAV R/C Button AA INFO R/C Button
Reference Programming the Remote G The remote control is a multi-brand or universal remote control. It be can programmed to operate most remote-controllable devices of other manufacturers. Note that the remote control may not control all models of other brands. Programming INPUT MODE TV 1 TV POWER INPUT code into a remote mode a Test your remote control.
Reference Codes Programming Codes Codes Brand Codes AIWA Brand 034 KENWOOD 014 034 AKAI 016 043 047 048 125 146 001 101 046 124 LG AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 039 012 023 BROKSONIC 035 037 129 CANON 028 031 033 043 CAPEHART 108 CRAIG 003 040 135 CURTIS MATHES 031 033 041 DAEWOO 005 007 010 064 065 108 110 111 (GOLDSTAR) Brand Codes Brand Codes 039 043 PORTLAND 108 TATUNG 039 043 PULSAR 072 TEAC 034 039 043 012 013
Reference Brand Codes Brand ALPHASTAR DSR 123 AMPLICA 050 BIRDVIEW 051 126 129 CHANNEL MASTER 013 014 015 036 055 CHAPARRAL 008 009 CITOH 054 CURTIS MATHES 050 145 DRAKE 005 006 007 011 052 112 012 018 Codes Brand Codes 133 134 PACE SKY SATELLITE 143 GENERAL INSTRUMENT 003 004 016 PANASONIC 060 031 059 101 PANSAT 121 HITACHI 139 140 HOUSTON TRACKER 033 037 057 104 077 029 PERSONAL CABLE 039 051 PHILIPS 117 WINEGARD 128 146 074 ZENITH 081
Reference T roubleshooting Checklist Checklist The ? doesn't work Power is suddenly Check to control The remote control does not work operation see if there is any obstruction. object normally. between the product ? Are batteries installed with correct ? Correct remote ? Install new ? Is the sleep ? Check the power control settings. Power interrupted No broadcast on station tuned with Auto off activated.
Reference The audio function does not work. No ? Press the VOL Picture OK & ? Sound muted? Press MUTE button. No sound ? Try ? Are the audio cables installed ? Adjust ? A output from of the one VOLUME button. or another channel. The Balance in menu Unusual sound change option. in ambient noise when the product the humidity or temperature may result in an unusual product is turned on or off and does not indicate a fault with product.
Reference Maintenance Early - your malfunctions new TV. Be Cleaning Cleaning 1. Here's and the a be prevented. Careful and to turn the power off and regular cleaning can extend the amount of time you unplug the power cord before you begin any cleaning. will have the the Screen Screen a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water little fabric softener or dish washing detergent.
Reference Product Specifications Specifications 26LC2D MODEL Dimensions (26LC2D-UE) with stand 26.8 (Width x Height x Depth) without stand Weight Power x 21.6 681.0 x 550.0 26.8 x 19.3 681.0 x 491.0 with stand 37.0 without stand 29.8 Operating Humidity condition Storage Temperature pounds kg pounds / 13.
Reference 63
