Owner's Manual

APPENDIX
79
01. Power
(Command2:a)
To control Power
On/Off
of the TV.
Data 0 : Power Off Data 1 : Power On
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Acknowledgement [a][ ][Set ID][ ][OK][Data][x]
To show Power
On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
*
In a like
manner,
if other functions transmit 'FF'
data based on this
format,
Acknowledgement
data
feedback
presents
status about each function.
*
To
change
the Power on
input
the transmission
more than twice.
Acknowledgement [a][ ][Set ID][ ][OK][Data][x]
02.
Aspect
Ratio
(Command2:c) (Main
picture
size)
To
adjust
the screen format.
(Main
picture
format)
You can also
adjust
the screen format
using
the ARC
(Aspect
Ratio
Control)
button on remote control or
in the SCREEN menu.
Data 1: Normal screen
(4:3)
Data 2: Wide screen
(16:9)
Data 3:
Spectacle
Data 4: Full screen
(Zoom1)
Data 5: Full screen
(Zoom2)
Data 6:
Original
Data
7:
Wide screen
(14:9)
Data 8: Full
(Option)
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Acknowledgement [c][ ][Set ID][ ][OK][Data][x]
*
Using
the RGB-PC or
Component input, you
select
either
16:9
or 4:3 screen
aspect
ratio.
03. Screen Mute
(Command2:d)
To select screen mute
on/off.
Data 0 : Screen mute off
(Picture on)
Data 1 : Screen mute on
(Picture off)
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Acknowledgement [d][ ][Set ID][ ][OK][Data][x]
04. Volume Mute
(Command2:e)
To control volume mute
on/off.
You can also
adjust
mute
using
the MUTE button on
remote control.
Data 0 : Volume mute off
(Volume on)
Data 1 : Volume mute on
(Volume off)
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Acknowledgement [e][ ][Set ID][ ][OK][Data][x]
05. Volume Control
(Command2:f)
To
adjust
volume.
You can also
adjust
volume with the volume buttons
on remote control.
DataMin:0~Max:64
Refer to 'Real data
mapping
1 '. See
page
81.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Acknowledgement [f][ ][Set ID][ ][OK][Data][x]
06. Contrast
(Command2:g)
To
adjust
screen contrast.
You can also
adjust
contrast in the PICTURE menu.
DataMin:0~Max:64
Refer to 'Real data
mapping
1'. See
page
81.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Acknowledgement [g][ ][Set ID][ ][OK][Data][x]
07.
Brightness
(Command2:h)
To
adjust
screen
brightness.
You can also
adjust brightness
in the PICTURE menu.
DataMin:0~Max:64
Refer to 'Real data
mapping
1'. See
page
81.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Acknowledgement [h][ ][Set ID][ ][OK][Data][x]
08. Colour
(Command2:i)
To
adjust
the screen colour.
You can also
adjust
colour in the PICTURE menu.
DataMin:0~Max:64
Refer to 'Real data
mapping
1'. See
page
81.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Acknowledgement [i][ ][Set ID][ ][OK][Data][x]
09. Tint
(Command2:j)
To
adjust
the screen tint.
You can also
adjust
tint in the PICTURE menu.
DataRed:0~Green:64
Refer to 'Real data
mapping
1'. See
page
81.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Acknowledgement [j][ ][Set ID][ ][OK][Data][x]
0323G_3-en_rev02
3/22/06
1:33 AM
Page
79