Lifds Good LCD TV OWNER'S MANUAL 26LH210C 26LH200C 42LH300C 32LH210C 32LH200C 47LH300C 37LH200C 42LH200C Please read this manual carefully your set and retain it for future The model and serial number of on the back and one side of the Record it below before operating reference. the TV is located TV. should you ever need service. Model: This product qualifies for ENERGY STAR in the "factory default (Home Use)" setting. 1 -800-243-0000 usa co_s_m_,_ .
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock this product hazards, do not expose to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLEPARTS INSIDE. REFERTO Class B digital device This equipment QUALIFIED SERVICEPERSONNEL. has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS O Read these instructions. Protect the power cord from being walked on Keep these instructions. or pinched Heed all warnings. receptacles, and the point where they exit from the apparatus. particularly at plugs, convenience Follow all instructions. O Do not use this apparatus near water. Only use attachments/accessories the manufacturer. O by Clean only with dry cloth.
SAFETYINSTRUCTIONS Never touch this apparatus or antenna a thunder or lighting storm. during O WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV 0 When mounting with a TV on the wall, make sure wet hands. Do not install not to install the TV by the hanging power and near flammable signal cables on the back of the TV.
@ @ ANTENNAS Outdoor antenna If an outdoor precautions should head grounding antenna Install your is installed, below. An outdoor not be located power follow the antenna system in the vicinity lines or other light or lines or circuits as death or serious injury can occur. Be sure the antenna to provide some surges and built-up Section system is grounded protection a bookcase.
CONTENTS WARNING / CAUTION ............................ 2 SAFETY INSTRUCTIONS .......................... 3 Channel Setup - Auto Scan (Auto Tuning) ........................... 42 - Add / Delete Channel (Manual Tuning) ...... 43 FEATURE OF THIS TV ............................... 8 - Channel Editing ........................................ Channel List .................................................... 44 45 Favorite Channel Setup/Favorite Channel List.. 46 Brief Information .......................
Auto Volume Leveler (Auto Volume) ................. 76 Clear Voice II .................................................. 77 Preset Sound Setting (Sound Mode) ................ 78 Sound Setting Adjustment - User Mode ........... 79 Balance .......................................................... 80 Audio Reset ................................................... 81 TV Speakers On/Off Setup ............................. 82 External Speakers On/Off Setup .....................
FEATURE OF THIS TV High-definition television. High-resolution digital rT! DOLBY DIGITAL i__'i. j[_ _ _I' television playback composed of roughly broadcast a million orand more pixels, system 16:9 aspect-ratio I Manufactured under license from Dolby Laboratories. "Dolby "and the double-D symbol are trademarks of Dolby Laboratories. screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions.
PREPARATION ACCESSORIES Ensure that the following accessories dealer where you purchased The accessories included are included with your TV. If an accessory is missing, please contact the the TV. may differ from the images below. "O _o r_l (For 26LH210C, 32LH210C) _o © z \\ Owner's Manual CD Manual (Except Installer Remote Control, Batteries User Remote Control, Batteries Power Cord 47LH300C) x4 Screws for stand assembly (Refer to P.12) Screw for stand fixing (Refer to P.
PREPARATION FRONTPANELINFORMATION _ Image shown may differ from your TV.
BACK PANELINFORMATION ""_Image shown may differ from your TV. "O _o m _o © z @ ANTENNA/CABLE @ RJP(REMOTE JACK PACK) PORT Connect to remote jack pack control output port. @ AV (Audio/Video) @ RS-232C IN Analog composite connection. definition video only (480i). @ HDMI/DVI IN, HDMI Supports standard Accepts and Digital audio. & SERVICE) PORT Used by third party devices. IN PORT Doesn't @ SPEAKEROUT DVl video using an adapter or HDMI to PORT Used for external speaker jack.
PREPARATION STAND INSTRUCTIONS _ Image shown may differ from your TV. INSTALLATION m O © z Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the TV as shown. Fix the 4 screws securely using the holes in the back of the TV.
DETACHMENT O Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 0 C) Z Remove the screws from the TV. Detach the stand from TV. PROTECTION COVER After removing the stand, install the included protection cover over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click.
PREPARATION VESAWALL MOUNTING Install your wall mount on a solid wall perpendicular contact to the floor. When attaching to other building materials, please your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting LG recommends that wall mounting the TV to a wall. r'rl be performed by a qualified professional installer. © z 200 • 100 M4 [[[[[[[[[[[[[[ 4 RW230 _...
CABLEMANAGEMENT ,,,IImage shown may differ from your TV. 0 Connect the cables as necessary. -O To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. _o _o Secure the power cable with the PROTECTIVE BRACKET prevent © z and SCREW as shown. It will help the power cable from being removed by accident. PROTECTIVE BRACKET O Install the CABLE MANAGEMENT shown. CLIP as CABLE MANAGEMENT O CLIP ut the cables inside the CABLE MANAGEMENT CLIP and snap it closed.
PREPARATION DESKTOP PEDESTALINSTALLATION ,,,IImage shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. -0 _o l'rl 4 inches _o 4 inches 4 inches 4 inches © z SWIVELSTAND After installing the TV, you can adjust the TV set manually to the left or right direction your viewing position. 97.,: - ..... .";i \ ......._ ....... ... -- KENSINGTONSECURITYSYSTEM ,,,IThis feature is not available for all models.
ATTACHING THE TV TO A DESK ""_Image shown may differ from your TV. The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.
PREPARATION SECURING THE TV TO THE WALL TO PREVENTFALLING WHEN THE TV IS USED ON A STAND You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). ,,,iImage shown may differ from your TV. m We recommend Additionally, © z potentially Caution: that you set up the TV close to a wall so it cannot fall over if pushed backwards.
,,,ITo prevent damage do not connect to the power outlet until all connections are made between the devices. ""_Image shown may differ from your TV. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) _D Wall Antenna Socket or Outdoor Antenna without m a Cable Box Connections. _D For optimum picture quality, adjust antenna direction if needed.
EXTERNAL EQUIPMENT SETUP ,,,_ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. HD RECEIVERSETUP This TV can receive digital you do receive digital r'_ Component over-the-air/digital signals from a digital cable signals without set-top an external box or other digital external digital set-top box. However, if device. Connection x m _D I.
HDMI Connection 1. How to connect O onnect the digital set-top box to the HDMI/DVI IN 1or HDMI 2 jack on the TV. m X m O No separate audio connection is necessary. z HDMI supports both audio and video. m _D C 2. How to use m 01_ Turn on the digital set-top box. z (Refer to the owner's manual for the digital set-top box.) m 01_ Select the HDMI1 or HDMI2 input source on the TV using the INPUT button on the remote control. C HDMI-DTV 26.97 2ZOO 33.71 33.75 23.976 24.00 29.97 30.
EXTERNALEQUIPMENT SETUP DVI to HDMI Connection 1. How to connect Connect the DVI output of the digital set-top box to the HDMI/DVl IN 1 or HDMI 2 jack on the TV. m x m _o z m X:) ci O Connect AUDIO the digital set-top box audio output IN (RGB/DVl) jack on the TV. to the "O m z m 2. How to use c "O 01_ Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top box.) 01_ Select the HDMI1 or HDMI2 input source on the TV using the INPUT button on the remote control.
DVD SETUP Component Connection 1. How to connect O Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). x -t z O Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the TV. _0 c z -t 2. How to use -t c 01_ Turn on the DVD player, insert a DVD. 0_Select the Component input source on the TV using the INPUT button on the remote control.
EXTERNALEQUIPMENT SETUP Composite (RCA) Connection 1. How to connect O m x Connect the AUDIO/VIDEO jacks between TV and DVD. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). m _o z 2. How to use m _D c m z 01_ Turn on the DVD player, insert a DVD. 01_ Select the AV 1 or AV1 input source on the TV using the INPUT button on the remote control. 01_ Refer to the DVD player's manual for operating instructions. m c -O HDMI Connection 1.
VCR SETUP Antenna Connection m x 1. How to connect m _o z O Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN sock- m XD c et on the TV. "O m z O Connect the antenna cable to antenna in socket of the VCR. the RF m Wall Jack c "O 2. How to use Antenna 01_ Set VCR output switch to 3 or 4 and then tune TV to the same channel number. 01_ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.
PREPARATION Composite (RCA) Connection m 1. How to connect © z O Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). 2. How to use 01_ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) 0101_ Select the AV 1 or AV2 input source on the TV using the INPUT button on the remote control.
OTHERA/V SOURCESETUP Camcorder 1. How to connect Video Game Set -O _o 0 Connect between the AUDIO/VIDEO TV and external jacks equipment. m _o Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) © z 2. How to use 01_ Select the AV I or AV2 input source on the TV using the IN PUT button on the remote control. 01_ Operate the corresponding external equipment.
EXTERNALEQUIPMENT SETUP USB CONNECTION 1. How to connect O onnect the USB device to the USB IN jack on the side of TV. x _o z _> _D c "O z r-r1 c "O 28 2. How to use After connecting tion. (_ p.
AUDIO OUT CONNECTION Send the TV's audio to external If you want to enjoy digital AUDIO OUT terminal audio equipment broadcasting through via the Audio 5.1 -channel on the back of TV to a Home Theater Output speakers, port. connect the OPTICAL DIGITAL (or amp). Analog r_l x 1. How to connect r_l z O Connect audio outputs to the TV's SPEAKER OUT jacks. r_l c O Set the "External Speaker option - On" in the AUDIO menu. (_ p.83).
EXTERNALEQUIPMENT SETUP PCSETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically VGA (D-Sub 15 pin) Connection 1. How to connect m x m O onnect output (PC) jackthe on VGA the TV. O Connect the PC audio output (RGB/DVI) jack on the TV. _o of the PC to the RGB IN z m X:) c to the AUDIO IN "O m z m c -O 2. How to use 01_ Turn on the PC and the TV. 01_ Select the RGB-PC input source on the TV using the INPUT button on the remote control.
r_ X m _o 7 m x_ C m 7 Supported Display Specifications (RGB-PC, HDMm-PC) m C For 26/32LH210C, 26/32/37/42LH200C For 42/47LH300C -O 31.469 70.08 31.468 70.09 31.469 70.08 31.469 70.08 31.469 59.94 31.469 59.94 35.156 37.879 56.25 60.31 48.363 60.00 4Z776 59.87 4Z712 60.015 63.981 60.02 75.00 60.00 66.587 59.934 67.5 60.00 6o , 48.363 60.00 4Z776 59.87 4Z720 59.
EXTERNALEQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The Position, m Phase, and Size can also be adjusted. You can use this function only when the PC resolution is set to 1024X768, x m _o z m X:) c m z m c "0 Select PICTURE. Select Screen (RGB-PC). Select Resolution. Select the desired resolution. 32 1280X768 or 1360X768.
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, not correct, try using the manual settings or a different if the image is still resolution or refresh rate on the PC. r'_ x m z m c m z m c Select PICTURE. Select Screen (RGB-PC). 01_ If the position correct, 011_ If picture after Auto Select Auto Config.. of the image is still not try Auto adjustment can adjust Phase. needs to adjustment the again.
EXTERNALEQUIPMENT SETUP Adjustment If the picture for screen Position, is not clear after auto adjustment Size, and Phase and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. m x m z m _D c m z m c Select PICTURE. 01_ Position: ture Select Screen (RGB-PC). to left/right Size, or Phase. is to adjust pic- and up/down as you prefer.
Screen Reset (Reset to original factory values) Returns Position, This feature Size, and Phase to the default factory settings. operates only in RGB-PC mode. m x m _o z m c m z m c -0 Select PICTURE. Select Screen (RGB-PC). Select Reset. Select Yes.
WATCHING TV / CHANNEL CONTROL INSTALLERREMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. INFO Displays channel information at the top of the screen. _ p.47 AV MODE Toggles through preset Video and Audio modes. _ p.50 POWER Turns the TV on from standby or off to standby. INPUT Rotates through inputs. Also switches the TV on from standby. _ p.48 ENERGYSAVING Adjusts the Energy Saving. _ p.
USER REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control MUTE POWER (For 26/32LH210C) sensor on the TV. Switches the sound on or off. t__ p.38 Turns the TV on from standby or off to standby. SAP Analog mode: Selects SAP) _ p.84 MTS sound (Mono, Stereo, or a DTV mode: Changes the audio language. INFO Displays channel information at the top of the screen. @ p.47 CC Select a closed caption. _ p.87 N -r" z (*In DTV/CADTV mode _ p.88) VOLUME UP Adjusts the volume.
WATCHING TV / CHANNEL CONTROL TURNING ON THE TV @ First, connect power cord correctly. At this moment, the TV switches to standby mode. 01_ In standby mode to turn TV on, press the (b/l , INPUT, POWER_ INPUT, CH (^ or v ), Number (0~9) Select the viewing source by using the INPUT 01_ This TV is programmed When finished mode. "-r" z CH (AT or ^ v ) button on the TV or press the button on the remote control. button on the remote control.
INITIAL SETTING This Function guides the user to easily set the essential chasing the TV. It will be displayed vated from the user menus. items for viewing the TV for the first on the screen when turning 01_ Default selection is "Home Use". We recommend ture in your home environment. the TV on for the first time. setting the TV to "Home Use" time when pur- It can also be acti- mode for the best pic- 01_ "Store Demo" Mode is only intended for use in retail environments.
WATCHING TV / CHANNEL CONTROL ON-SCREENMENUSSELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. i -r" z < N -r" > Z Z fT1 N 0 Z _m I I 0 Display each menu. Select a menu item. Accept the current selection. Return to TV viewing.
QUICK MENU Your TV's OSD (On Screen Display) Q.Menu may differ slightly (Quick Menu) is a menu of features _! from what is shown in this manual. which users might use frequently. Aspect Ratio: Selects your desired picture format. [] Picture Mode: Selects the desired preset picture setting. ((1_ Sound As ((@)) Multi Mode: Audio: Selects the desired preset sound setting. Changes the audio language (Digital signal). ((O)) SAP: Selects MTS sound (Analog signal).
WATCHING TV / CHANNEL CONTROL CHANNELSETUP Auto Scan (Auto Automatically channel list. finds all channels Run this function antenna available if you change your connected through residence during TV broadcasting Auto Tuning memorizes -r" z Tuning) only the channels antenna or cable inputs, and stores them in memory or move the TV. Also, make sure to run this function on the with the hours. available at the time.
Add/Delete When strength selecting monitor Channel (Manual DTV or CADTV input to see the quality signal Tuning) in the Manual Tuning menu, you can view the on-screen signal of the signal being received. N -r" z c_ < N -r" > Z Z fT1 Select CHANNEL. The TV will ask for a password if parental control Select Manual Tuning. has been activated (LOCK Menu). Use the password you set up in the LOCK Menu to allow a channel N 0 Z 0 search.
WATCHING TV / CHANNEL CONTROL Channel Editing The channels in the Channel List are displayed Edit List are displayed in black and the channels deleted from the Channel Edit in blue. When a channel number is deleted, it means that you will be unable to select it using CH ^ v button during TV viewing. If you wish to select the deleted it in the Channel Edit menu. channel, directly enter the channel number with the NUMBER buttons or select N "lz < N I > z z (_ Ch.
CHANNEL LIST You can check which channels are stored in the memory by displaying the channel list. This padlock is displayed when the channel is locked with parental control. iiii_iii_iiiiiH_iiii_i_i_i_i_iiiiiiiiii_ii_i_i_iii_!iiiiiiii_ii!i_Ji_iiiiHiiii_i_ii_iHI_iii_iiiiiii_iiii_i iii_iii!i!_iiii_iiii!_i_iiii_ii_iii_iiiiii!ii_Wiii!!_ii_iiiiii!iii_!iiiii_iii!_iiii!ii!i N -r" z < Displaying Channel List Display the Channel List.
WATCHING TV / CHANNEL CONTROL FAVORITECHANNEL SETUP Favorite Channels are a convenient feature that lets you quickly for the TV to select all the in-between channels. To tune to a favorite channel, press the FAV (Favorite) button select channels of your choice without waiting repeatedly. or Select your desired channel. Select Del/Add/Fav. N -r" z Select Favorite. < N -r > Z Z Return to TV viewing.
BRIEFINFORMATION Brief Info shows the present screen information. Show the Brief Info on the screen. Return to TV viewing. ¢h -r" z @ @ @ @ < N -r > z z fT1 N © Z © Multilingual : The program contains two or more audio services. Use the Q.MENU menu to select wanted Audio. Caption : The program contains the Q.MENU one or more caption menu to select wanted Closed services. Use @ Program title @ Day, Month, Year @ Program start time @ Program progress bar caption.
WATCHING TV / CHANNEL CONTROL INPUT LIST Only these input signals which are connected to a TV can be activated and selected. Select the desired input source. You can also select the desired input source in the INPUT i TV ] ,,,1_[ AV1 ] ,,,l_ [ AV2 menu. [ ,,_ [ Component] t ! [ -r" z ie) Disconnected inputs are inactive (grayed out) < Select a desired input source (except TV).
INPUT LABEL You can set a label for each input source when it's not in use. This indicates which device is connected to which input port. N -r" z < With using OPTION menu With using INPUT button N -1> z z fT1 Select OPTION. Select the source. N O Z _m O Select Input Label. Select the source. Select the label. Select the label. Return to the _revious menu. Return to TV viewing. Return to the previous menu. Return to TV viewing.
WATCHING TV / CHANNEL CONTROL AV MODE AV Mode toggles through preset Video and Audio settings. ! N -r" z < N I > z z Press the AV MODE button select the desired source. repeatedly to 0_,If you select "Cinema" Cinema will be selected in AV mode, both for "PIC- TURE menu - Picture Mode" menu - Sound Mode" and "AUDIO respectively. 01_ If you select "Off" in AV mode, the "Picture Mode" and "Sound Mode" fT1 return to previous selected N © Z © H Off: Disables the AV MODE.
SlmPLInK SIMPLINK cables allows you to control and settings. and play other This TV may work with AV devices devices with connected HDMI-CEC with HDMI support, cable without but only devices additional with the _)mp-,nK Iogo are fully supported. SlMPLINK can be turned on and off in the user menus. N -r" z < N -r" > Z Z fT1 Select OPTION. Select SIMPLINK. Select On N 0 Z _m 0 or Off. Return to the previous menu. Return to TV viewing.
WATCHING TV / CHANNEL CONTROL SIMPLINK Functions Direct Play: out additional _Select 0_Disc playback: off _Switch -r" z control Enables you to select one of the AV devices connected Control all devices: audio-out: Power AV devices to the TV, you can directly the devices and play media with- settings. AV device: 0_Power _Sync After connecting connected AV devices by pressing the ^ When you power offthe > , ENTER, I_, II, I [ _1_1and I_1_ buttons. devices are turned off.
SIMPLINK Menu Display SIMPLINK menu. Select the desired device. Control connected N -r" z AV devices. < @ TV viewing: Switch to the previous TV channel regardless of the current mode. @ DISC playback: N I > z z Select and play discs. When multiple discs are available, the titles of discs are conveniently bottom of the screen. @ VCR playback: VCR.
USB ENTRY MODES When you connect a USB device, this pop up menu is displayed automatically. When the Pop Up menu does not appear, you can select Photo List or Music In USB device, you can not add a new folder Connect the USB device to the USB or delete List in the USB menu. the existing folder. IN jacks on the side of TV. _ This TV can view JPG image files and play MP3 audio files. f When removing Select the USB USB device. C Select PHOTO LIST or MUSIC LIST.
PHOTOLIST You can view .JPG files from The On-Screen Supported USB storage Display on your photo model devices. may be slightly different. file: *.JPG You can play JPG files only. Only baseline scan is supported AvailableJPG among JPG (not progressive). size: 64 pixel (width) x 64 pixel (height) - 15360 pixel (width) x 8640 pixel (height) c Do Screen Components 2 Select Photo Select USB. 0 Moves to upper level folder 0 Preview: Display thumbnail/folder List.
USB Photo Selection ._Navigation _ and Popup Menu Popup Menu CH Page Change Mark ct% Exit C When you select a file (not folder), menu is displayed. _, Vie_. Display the selected this PopUp item. _, Mark All: Mark all photos on the screen. _, Unmark _*, Delete: .=_Navigation _ Popup Menu CH Page Change Mark ct-_ Exit t_, Close: All: Deselect all marked photos. Delete the selected Close the pop-up photo item. menu. Select the target folder or drive.
Full Screen Menu You can change the Photo screen mode. List view so that it fills the screen. More operations are available in full c _:_Navigation _;PopupMenu CH PageChange Mark (_% Exit Mark o_a Exit $ _2Navigation _PopupMenu CH PageChange The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. _UsetheCH A v Select the target folder or drive. Select the desired photos. Show the Popup menu. Select View. The selected full size.
USB Select the Slideshow, BGM, Delete, Option, or Hide. (Rotate), m Use A v < > button to select and control the menu on the full_sized screenl C L_ _ Slideshow: Selected photos are displayed during slide show. If no photo is selected, all photos rent folder are displayed during slide show. the in the cur- Set the time interval of the slide show in Option. _ BGM: Listen to music while viewing photos in full size. _ Set the BGM device and album in Option. _ (Rotate): Rotate photos.
MUSIC LIST You can use the Music This TV cannot List menu to play MP3 files from play back copy-protected The On Screen Display on your model a USB storage device. files. may be slightly different. Supported music file: *.MP3 Bit rate range 32 Kbps - 320 Kbps • Sampling rate (Sampling Frequency) MPEG1 layer 3:32 kHz, 44.1 kHz, 48 kHz c MPEG2 layer 3:16 kHz, 22.05 Do kHz, 24 kHz MPEG2.5 layer 3:8 kHz, 11.025 kHz, 12 kHz Screen Components Select Music Select USB. 0 0 List.
USB Music Selection and Popup Menu _, Play (During stop): Play the selected song. Once a song finishes playing, the next selected one will be played. When there are no selected songs to play, the next one in the current er will be played. If you go to a different and press the ENTER button, the foldfolder current song in playback will stop. _, Play C Navigation (_ Popup Menu CH Page Change Mark _% Exit Marked: Play the selected a song finishes playing, songs.
The play information box (as shown below) will automatically move across the screen when there is no user input to prevent a fixed image remaining on the screen for a extended period of time. c o_NOTE ,_When music is playing, _ is displayed in front of the music play time. A damaged or corrupted music file that does not play displays 00:00 as the play time. Music files with copy-protection will not play. Press ENTER. • , or RETURN button to stop the screen saver. ....
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose You can select a different the way an analog picture aspect ratio depending with a 4:3 aspect ratio is displayed on input source (analog broadcasting, on your digital TV. broadcasting, aux). C _D m © z _D © Select PICTURE. _ You can also adjust Aspect the Q.MENU. Select Aspect Ratio. Select the desired picture format. Return to the previous menu. Return to TV viewing.
16:9 4:3 Adjust the picture portion Just horizontally, in a linear pro- to fill the entire screen. want to view a picture 4:3 aspect ratio. Zoom the edges of video signals are cropped 1-27o. Just 4:3 when you with an original Scan Normally Choose Scan turns shows the complete off this cropping and video. Choose Zoom when you want to view the picture without bottom any alteration. portions However, the top and of the picture will be cropped.
PICTURECONTROL PICTURE WIZARD This feature lets you adjust the picture Use this to calibrate quality When you adjust made. "O the screen quality by easily following quality of the original by adjusting image. the Black and White Level etc. You can calibrate the image to Low, Recommended or High, you can see the example of the changes you Select PICTURE. N Adjust White C Select Picture Wizard. _D r_ N © Z _D © Adjust Color. Adjust Picture Wizard. Adjust Black Level.
Adjust Horizontal -O Sharpness. N C _o m Select input source to apply the settings. N © Z _o © Save. Adjust Vertical Sharpness. Finish the Picture Wizard. 01_ If you stop the setting ste G the changes the TV. 0_Once the Picture ture quality_ Energy to Off before the final will not be saved to Wizard Saving sets the picis changed automatically. Adjust Backlight.
PICTURECONTROL PRESETPICTURE SETTINGS (PICTURE MODE) There are factory setting manually. presets for picture settings available in the user menus. You can use a preset, change each "O N C _D Select PICTURE. 01_Vivid, N © Z _D © Standard, Sport, Natural, Cinema, and Game Settings are preset for the optimum picture quality at the factoSelect Picture Mode. ry. 01_ Vivid: This is the mode to maximize the effect Select Vivid, Cinema, Standard, Sport, Natural, or Game.
MANUAL PICTURE ADJUSTMENT- USERMODE Adjust the picture appearance to suit your preference and viewing situations. "O N Select PICTURE. Select Picture When Mode. adjusting Backlight function Backlight: This Cinema, Sport, or Game. Select Backlight, Sharpness, Natural, Contrast, Color, or Tint. adjustments. of LCD panel, to control the brightness of the screen.
PICTURECONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according You can set the video seeing differently To reset to the factory default after function for each Picture Mode. for each input. making "O N C m N O Z Select PICTURE. O Select Advanced Control. Select your desired options. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. 68 to the special video screen.
EXPERTPICTURE CONTROL By segmenting categories, Expert1 fit, offering the optimal picture and Expert2 provide more categories which users can set as they see quality for users. This may also be used by a professional to help optimize the TV performance in the environment the TV is in. "0 N C r_l Select PICTURE. Select Picture Mode. Select 17A°Expertl Select Expert N 0 Z 0 or I._AExpert2. Control. Select your desired menu option. Make appropriate adjustments.
PICTURECONTROL H Set to warm to enhance hotter colors such as red, or set to cool to enhance cooler colors such as blue. mini Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. mini Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid.
Standard: Displays standard set of colors. Wide: Increase number of colors used. Maximize the utilization of color to increase color quality. Show clearer and distinctive Convert yet natural edges in of the video. the color of a different This is the function video to HD color. to filter the specific colors of the video. You can use the RGB filter to set color saturation *This feature is not available This is the function This feature for all models. to express richer color.
PICTURECONTROL ENERGYSAVING It reduces the TV's power consumption The default factory setting complies level to be viewed at home. by lowering the backlight with the Energy Star level. requirements You can increase the brightness of your screen by adjusting the Energy Mode. and is adjusted to the comfortable Saving level or by setting the Picture "O N C _D r_l N O Z Select PICTURE. 01_ When selecting Screen off after 3 seconds. _D O Select e_ Energy Saving.
PICTURERESET Settings of the selected picture modes return to the default factory settings. "O N C m Select PICTURE. N O Z O Select Picture Reset. Select Yes. Initialize the adjusted value. Return to TV viewing.
PICTURECONTROL POWER INDICATOR- Except 26LH200C, 26LH210C Adjust the power/standby indicator light on the front of the TV. -O c _o m © z Select OPTION. Standby _o set the indicator © Select Standby Light Select your desired options. Return to the previous menu. Return to TV viewing. 01_ Power Indicator. or Power Light. Light: Determines whether to light on the front of the TV to On or Off Select Power 74 Light: in standby Determines mode.
DEMO MODE Displays a slide show to explain the various feature of this TV. c _o m Select OPTION. 01_ This feature Setting-Home is disabled Use". in "Initial © z _o Select Demo © Mode. Select On to show the various feature of the TV. Return to TV viewing. After a while, Demo Mode starts. If you want to stop the demo, press any button (Except VOL +, - and MUTE button).
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER(AUTO VOLUME) Auto Volume makes sure that the volume regular Because each broadcasting time the channel adjustments station is changed. has its own signal conditions, This feature for each program. 0 c Z Select AUDIO. z c Select Auto Volume. 1-11 N 0 Z .-I Select On or Off. 0 Return to the previous menu. Return to TV viewing. 76 level remains consistent whether you are watching a commercial TV program.
CLEAR VOICE II By differentiating the human sound range from others, it improves the sound quality of voices. Z Select AUDIO. Select Clear Voice II. 0 c Z Select 0 n or Off. _o Adjustment for Clear Voice Level With selecting O n z c l'rl N 0 Z .-I Select Level. 0 Make appropriate adjustments. Return to the previous menu. Return to TV viewing.
SOUND & LANGUAGE CONTROL PRESETSOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without Select AUDIO. and Mode. _o z Select Standard, Cinema, Sport, Music, or Game. l'rl Return to the previous menu. are Cinema, preset 01_ You can also adjust the Q.MENU. 01_Standard: sound. Music: music. Cinema: movies. 01_ Sport: 0 Return to TV viewing. sports 01_ Game: games. 78 Music, Game presets. for Sport, optimum sound quality at the factory. Select Sound N 0 Z .
SOUND SETTING ADJUSTMENT- USER MODE Adjust the sound to suit your taste and room situations. Select AUDIO. Make appropriate Select Sound adjustments. Mode. Return to the previous menu. Select Standard, Cinema, Music, Sport, 0 c Z Return to TV viewing. or Game. _o z Select Treble or Bass. c l'rl SRS TRUSURROUND XT Select this option to sound N 0 Z .-I realistic. 0 Select AUDIO. If sound quality or volume you want, it is recommended Select SRS TruSurround Select On or Off. XT.
SOUND & LANGUAGE CONTROL BALANCE Adjust 0 c Z the left/right sound of speaker to suit your taste and room situations. Select AUDIO. _o Select Balance. z c l'rl Make appropriate N 0 Z .-I 0 Return to the previous menu. Return to TV viewing. 80 adjustments.
AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. 0 c Z Select AUDIO. z c Select Reset. l'rl Initialize the adjusted value. N 0 Z .-I 0 Return to TV viewing.
SOUND & LANGUAGE CONTROL TV SPEAKERSON/OFF SETUP Turn the TV speakers off if using external In AV, Component, RGB and HDMI when there Hi-Fi system or a SRS System, turn offthe O c Z Select AUDIO. z Select TV Speaker. c l'rl 0 Select On or Off. Return to the previous menu. Return to TV viewing. 82 with HDMI to DVl cable, the TV speaker can be operational is no video signal. If you wish to use an external N 0 Z .-I audio equipment. TV's internal speakers.
EXTERNALSPEAKERSON/OFF SETUP Turn the external speakers on if using external audio equipment. 0 c Z Select AUDIO. _o Select External Speaker. z c l'rl Select 0 n or Off. Return to the previous menu. N 0 Z .-I 0 Return to TV viewing.
SOUND & LANGUAGE CONTROL STEREO/SAP BROADCAST SETUP On analog signals, this TV can receive accompanies the stereo program ly used if the broadcast MTS stereo if the station programs transmits and any SAP (Secondary an additional Audio Program) is only in Mono. 0 c Z Analog TV z Digital TV Select Multi Select SAP. Audio. c l'rl N 0 Z .-I 0 84 Select Mono, Stereo, Return to TV viewing. or SAP. that sound signal. Mono sound is automatical- Select other languages.
AUDIO LANGUAGE This feature operates only in DTV/CADTV mode. Select OPTION. Select Audio Language. 0 c Z _o z Select your desired language. c l'rl Return to the previous menu. N 0 Z .-I 0 Return to TV viewing.
SOUND & LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected 0 c Z language. Select OPTION. Select Menu Language. z c Select your desired language. From this point on, the on-screen l'rl N 0 Z .-I Return to the previous menu. 0 Return to TV viewing. 86 menus will be shown in the selected language.
CAPTION MODE Analog Captions are provided information usually Broadcasting if provided the program's System Captions to help the hearing on a program. dialog. impaired Analog Caption/Text, and analog channels on the Antenna/Cable. was last set when you turned watch TV. Select a caption caption displays if provided information by the broadcaster, This TV is programmed the power off.
SOUND & LANGUAGE CONTROL Digital Choose Other Broadcasting the language you want the DTV/CADTV Languages can be chosen for digital This function O c Z System Captions in only available when Caption Mode is set On. Select OPTION. Select Caption. c l'rl Select O n. N 0 Z .-I 0 Select CC1-4, Service1 - 6. Text1-4, Return to the previous menu. Return to TV viewing. 88 to appear in. sources only if they are included on the program.
Caption Option Customize the DTV/CADTV This function captions in only available that appear when Caption on your screen. Mode is set On. Select OPTION. 01_ Size: Set the word size. Select Caption. 01_ Font: Select a typeface 0_Text Color: Choose for the text. a color for the text. Select Digital m 01_ Text Opacity: Specify the opacity for the text color. Select 0 n. 01_ Bg (Background) background color. Option.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically The digital channel signal Set the clock manually from a digital includes if the current channel signal. information for the current time is set incorrectly Select TIME. m Select Clock. m z Select Auto. Select your viewing area time zone. • U.S.A: Eastern, Central, Pacific, Alaska, or Hawaii. Mountain, • Canada: Eastern, Central, Mountain, Pacific, New F.land, or Atlantic.
Manual Clock Setup If the current time setting is wrong, reset the clock manually. Select TIME. Select Clock. m m Select Manual. z Select the Year, Month, Date, Hour, or Minutes option. Set the Year, Month, Date, Hour, or Minutes option. Return to the previous menu. Return to TV viewing.
TIME SETTING AUTO ON/OFF TIME SETTING This function The Off Time operates only if the current function overrides The TV must be in standby the On time has been set. Time mode for the On If you do not press any button within automatically mode. revert to standby function Time if they are both set to the same time. to work. 2 hours after the TV turns on with the On i_f_ To cancel On/Off Select TIME. Time Time function, function, the TV will select Off.
SLEEPTIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. Select TIME. H To cancel the Sleep Select Sleep Timer. Make appropriate Timer, You can also adjust Sleep the Q.MENU. select Off. Timer in adjustments. _D r_ z Return to the previous menu. Return to TV viewing.
PARENTALCONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. this function, the following It is also possible to block all program viewing for a time period.
Lock System Enables or disables the blocking scheme you set up previously. Se,ect'OC. 01_ When you select 0 n, the Lock System is enable. Input the password. Select Lock System. _o m Select 0 n or Off. Return to the previous menu. z N 0 z _o 0 Return to TV viewing.
PARENTALCONTROL / RATINGS Set Password Change the password by inputting a new password twice. _D i° Select LOCK. Input the password. Select Set Password. m z Choose any 4 digits for your new password. As soon as the 4 digits N 0 z 0 Return to the previous menu. Return to TV viewing. z Ch 96 are entered, the same 4 digits on the Confirm.
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children (_ Ch. Change _ Navigation CH Page Change to watch. _ Previous Block/Unblock Select LOCK. 01_ If a channel is locked, enter the password to unlock it temporarily. Input the password. Select Block Channel. Select a channel to block or unblock. m z Block or unblock a channel. Return to the previous menu. N © z © Return to TV viewing.
PARENTALCONTROL / RATINGS MOVIE & TV RATING Movie Rating (MPAA) Blocks movies according set the ratings limit the movie ratings to the movie ratings limits specified, by blocking so children out all the movies with the ratings cannot view certain above a specified limit only applies to movies shown on TV, not TV programs, Select LOCK. 0_.If movies. You can level. Keep in mind that such as soap operas.
TV Rating Children Prevents children from watching rating does not apply to other certain ences in the TV Rating - sub menu, your __ children's TV programs. TV programs, Unless you block children can view those Select LOCK. according certain to the ratings limit set. The children TV programs intended for mature audi- programs. 01_ Age (applies to TV-Y, TV-Y7) 0101_ Fantasy Violence (applies to TV-Y7) Input the password. Select TV Rating-Children.
PARENTALCONTROL / RATINGS TV Rating General Based on the ratings, blocks certain TV programs that you and your Select LOCK. family do not want to view. 01_ Age (applies to TV-G,TV-PG,TV-14,TVMA). 01_ Dialogue-sexual Input the password. dialogue (applies to TV-PG,TV-14). 01_ Language-adult language (applies to TV-PG, TV-14, TV-MA). Select TV Rating-General. 01_ Sex-sexual situations (applies to TV-PG, TV-14, TV-MA). _D m z Select Age, Dialogue, Sex or Violence.
DOWNLOADABLE RATING This function is available This function operates only for digital channels. only when TV has received Region5 Rating data. t 01_ Based on rating table, your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. _ 0_Ifa Downloadable Select LOCK. rating is locked, enter the password to unlock it temporarily. Input the password. _D m z Select Downloadable Rating. Select desired Downloadable Rating N O z _D O option.
PARENTALCONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input. Select LOCK. Input the password. _o Select Input Block. m z N 0 z Select input source. _o 0 Select On or Off. _o z c_ Return to the previous menu. Return to TV viewing.
KEY LOCK This feature can be used to prevent only be used with the remote This TV is programmed unauthorized viewing by locking out the front panel controls, so that it can control. to remember which option it was last set to even if you turn the TV off. Select OPTION. Select Key Lock 01_ In Key Select 0 n or Off. Lock 'On', if the TV is turned CH (^ remote v) or NUMBER buttons control. 0_With the Key Return to the previous menu.
APPENDIX TROUBLESHOOTING Check to see if there is any object between the product causing obstruction. Ensure you are pointing Ensure that the batteries Ensure that the correct are installed with correct remote operating and the remote control the remote control directly at the TV. polarity (+ to +, - to -). mode is set: TV, VCR etc. Install new batteries. *This feature is not available for all models. Is the sleep timer set? Check the power control settings. Power interrupted.
mm_ Press the VOL or VOLUME button. mini Sound muted? Press MUTE button. mini Try another channel. The problem mmm Are the audio cables installed may be with the broadcast. properly? mmff Adjust Balance in menu option. mini A change in ambient when the product humidity is turned or temperature may result in an unusual noise on or off and does not indicate a fault with the product. mini Check HDMI cable over version 1.3. mini Check USB cable over version 2.0. mml_ Use normal MP3 file.
MAINTENANCE Early malfunctions enjoy your Caution: Careful and regular Be sure to turn the power off and unplug Cleaning O can be prevented. cleaning can extend the amount of time you can new TV. the power cord before you begin any cleaning. the Screen Here's a great way to keep the dust offyour water and a little fabric softener screen for a while. Wet a soft cloth in a mixture of lukewarm or dish washing detergent. Wring the cloth until it's almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS 26.2 x 19.8 x 8.8 inches 667.0 x 504.0 x 224.0 31.6 x 22.9 mm 805.0 26.2 x 1Z5 x 3.1 inches 667.0 x 446.2 x 80.0 x 583.0 31.6 x 20.7 mm 805.0 x 528.0 x 8.8 inches x 224.0 mm x 3.1 inches x 79.9 mm 19.6 Ibs / 8.9 kg 1Z1 Ibs / Z8 kg 25.3 Ibs / 11.5 kg 22.7 Ibs / 10.3 kg 32.6 Ibs / 14.8 kg 28.6 Ibs / 13.0 kg 41.8 Ibs / 19.0 kg 39.6 Ibs / 18.0 kg 35.7 Ibs / 16.2 kg 49.6 Ibs / 22.5 43.8 Ibs / 19.
IR CODES 1. How to Connect 01_ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control 0_Output IR Codes waveform Single pulse, modulated with 3Z917KHz signal at 455KHz L I- Tc Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/5 _ Configuration 1st frame of frame Low custom code High custom Data code code Data code Repeat frame I I tm Repeat code 4 Tf Lead code I 9 [ ms F -0 -0 m ° I 4.5 4 ms Repeat code z 0.
For Installer .... OB Remote Control POWER Remote control Button (Power On/Off t QIMENU Remote control MENU Remote control Button INPUT TV Discrete IR Code Button (TV Input Selection) C4 POWER ON Remote Control Button ........ Discrete IR Code (Only Power On) POWER OFF Discrete IR Code (Only Power Off) 09 FLASHBK Remote control Button MUTE Remote Control Button 5A AV1 07 44 95 AA 72 ....
EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C or an A/V control system) to control 01_ Note: RS-232C on this unit is intended The instructions software. RS-232C below are provided input jack to an external the TV's functions control device (such as a computer externally.
RS-232C Configurations Either cable below can be used. PC TV RXD TXD TXD RXD GND GND DTR DSR DSR RTS DTR CTS CTS RTS D-Sub 9 D-Sub 9 Set ID Use this function to specify a TV ID number. Refer to 'Real Data Mapping'. m z c7 X Select OPTION. 0101_ Real data mapping 0 : Step 0 Select Set ID. A : Step 10 (SET ID 10) Choose the desired TV ID number. The adjustment 1-99. range of Set ID is Return to the previous menu.
Command Reference 01 Power List k a 00 - 01 1 k r 00 - 64 s 00 ~ 64 b (_,_p.113) 15. Bass k k c ( 1 k t 00 - 64 k d ( • p.115) 1Z Color Temperature k u 00 ~ 02 ume k e 00 - 01 ] j q (p.114) 06. Volume Control k f 00 ~ 64 19. Auto Configuration j u (p.114) 07. k g O0 - 64 21 m b 08. Brightness k h O0 ~ 64 22. Key m c 09 k i 00 - 64 m g minor high minor low 02. Input Select x 04. Screen Mute or p.113) 10.
01. Power (Command: To control k a) Power On/Off You can also adjust mute using the MUTE button on remote control. of the TV.
11. Sharpness (Command: *Refer to 'Real data mapping'. k k) To adjust screen sharpness. Acknowledgement[t][ ][set ID][ ][OK/NG] [Data] [x] You can also adjust sharpness in the PICTURE menu. TransmisSion [k] [k][] [set ID][] [Data] [Cr] Data Min: O0 - Max: 64 (*transmit 1 7. Color Temperature (Command: _Refer to 'Real data mapping'. You can also adjust color temperature Acknowledgement [k] [ ][Set ID] [] [OK/NG] [Data] [x] Transmission[k] [u][] (Command: k I) in the PICTURE menu.
Data 5: Thetable above liststhebinary code which must be converted toHexadecimal before sending. Forexample: Thebinary code totunethesubsource toanNTSC cable channel is"10000001",which translates to"81" inHex. * 7th 21. Channel Add/Del (Command: m b) To add and delete the channels. [m] [b] [ ] [Set ID] [ ] [Data] [Cr] Transmission Data 00: Channel Delete Data 01 : Channel Add bit : For which source do you want to change the A_knowiedgemenL [b][ channel.
OPENSOURCELICENSE GNU GENERAL PUBLIC LICENSE Version 2, June Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim this license document, but changing it is not allowed. 1991 the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's licensed at all. free use or not copies of The precise terms and conditions modification follow.
b) You must cause any work that you distribute that in whole or in part contains or publish, or is derived c) Accompany from the it with the information offer to distribute corresponding you received as to the source code. (This alter- Program or any part there of, to be licensed as a whole at native is allowed only for noncommercial no charge to all third license.
If, as a consequence of a court patent infringement patent issues), conditions judgment or for any other or allegation of reason (not limited to are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license.
END OF TERMS AND CONDITIONS Also add information on how to contact you by electronic and paper mail. How to apply these terms to your new programs If you develop a new program, and you want it to be of the greatest possible If the program is interactive, make it output this when it starts in an interactive mode: a short notice like use to the public, the best way to achieve this is to make it free software which everyone can redistribute under these terms.
GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA To protect Everyone is permitted ified by someone else and passed on, the recipients to copy and distribute this license document, [This is the first counts verbatim copies of but changing it is not allowed. released version of the Lesser GPL.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that each copy an appropriate is linked with the Library has the freedom and the wherewithal and to the absence of any warranty; and distribute warranty; to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and with the library in order to run. a in exchange for a fee. 2.
3. You may opt to apply the terms of the ordinary GNU General the object file is unrestricted, regardless of whether it is legal- Public License instead of this License to a given copy of the ly a derivative work. Library. To do this, you must alter all the notices that refer to plus portions of the library will still fall under Section 6.
For an executable, the library" the required ed for reproducing cial form of the "work that uses must include any data and utility exception, the executable from it. However, as a spe- the include anything materials to be distributed that is normally distributed and so on) of the operating runs, unless that cutable. of other (compiler, itself proprietary the operating accompanies contradicts kernel, the exe- the license libraries that do not normal- system.
If the library does not specify a license version number_ you may choose any version ever published Foundation. 14.1f you wish to incorporate To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively parts of the library into other free programs whose distribution these, write to the author by the Free Software conditions are incompatible to ask for permission.
MOZILLA PUBLIC LICENSE Version 1.1 1 •Definitions• code which is described in the source code notice required by exhibit as original code, and which, at the time 1.0.1. "Commercial use" means distribution the covered code available to a third 1.1. or otherwise making of its release under party. "Contributor" means each entity that tributes to the creation of modifications• this license is not already covered code governed by this license. creates or con- 1.lO.l .
(c) the licenses granted effective in this section 2.1 (a) and (b) are on the date Initial developer original You may not offer or impose any terms on any source code first distributes version that code under the terms of this license. you (d) Notwithstanding section 2.
3.Z (c) Representations. contributor represents that, except as disclosed You may create a larger work by combining with other code not governed modifications are contributor's and/or contributor has sufficient and distribute original creation(s) rights to grant the rights Required notices. covered code by the terms of this license the larger work as a single product. In such a case, you must make sure the requirements license are fulfilled for the covered code. by this license. of this 4.
Z DISCLAIMER OF WARRANTY. COVERED such participant CODE IS PROVIDED UNDER THIS ON AN "AS IS" BASIS, WITHOUT KIND, EITHER WITHOUT sold, distributed, INCLUDING, THE ENTIRE RISK AS TO THE QUALITY or had made, modifications made by that participant. COVERED CODE 8.3. AND PERFOR- MANCE OF SHOULD ANY COVERED CODE PROVE DEFECTIVE IN IS WITH YOU.
11. MISCELLANEOUS• EXHIBIT A -Mozilla Public License• This license represents the complete agreement concerning subject matter hereof. If any provision held to be unenforceable, of this license is such provision shall be reformed only to the extent necessary to make it enforceable• License shall be governed by California (except to the extent applicable erwise), excluding its This law provisions The contents of this file are subject to the Mozilla Public License Version 1.
