Manual

APPENDIX

TROUBLESHOOTING

Check to see if there is any object between the product and the remote control

causing obstruction. Ensure you are pointing the remote control directly at the TV.

Ensure that the batteries are installed with correct polarity (+ to +, - to -).

Ensure that the correct remote operating mode is set: TV, VCR etc.

Install new batteries.

*This feature is not available for all models.

Is the sleep timer set?

Check the power control settings. Power interrupted.

If there is no signal, the TV turns off automatically in 15 minutes.

-O

I,I,ICheck whether the product is turned on.

i,i,iTry another channel. The problem may be with the broadcast.

i,i,iIs the power cord inserted into wall power outlet?

i,i,iCheck your antenna direction and/or location.

iw_Test the wall power outlet, plug another product's power cord into the outlet

where the product's power cord was plugged in.

i,i,HThis is normal, the image is muted during the product startup process. Please

contact your service center, if the picture has not appeared after five minutes.

i,i,iAdjust Color in menu option.

i,i,iKeep a sufficient distance between the product and the VCR.

i,i,iTry another channel. The problem may be with the broadcast.

i,i,iAre the video cables installed properly?

i,i,ffActivate any function to restore the brightness of the picture.

i,i,ffCheck for local interference such as an electrical appliance or power tool.

i,i,ffStation or cable product experiencing problems, tune to another station.

i,i,iStation signal is weak, reorient antenna to receive weaker station.

i,i,ffCheck for sources of possible interference.

i,i,ffCheck antenna (Change the direction of the antenna).

104