QUICK REFERENCE GUIDE LED LCD TV Please read this quick reference guide carefully before operating your set and retain it for future reference. 22LQ630H 26LQ630H 32LQ630H P/NO : MFL62194634 (1203-REV01) www.lgsolutions.
IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
Do not stick metal objects or any other yy conductive material into the power cord. Do not touch the end of the power cord while it is plugged in. Warning - To reduce the risk of fire or yy electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
ANTENNAS Outdoor antenna grounding yy (Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
Generated Sound yy “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.
TABLE OF CONTENTS 2 IMPORTANT SAFETY INSTRUCTIONS Additional Information 6 TABLE OF CONTENTS 6 Additional Information 7 Installation Procedure 7 ASSEMBLY and partS 7 8 10 10 Accessories Rear Jack Panel Setting Up the TV - VESA Wall Mounting The Owner’s Manual and Commercial Mode Setup Guide contain detailed information on the advanced features of these TVs. To view the extended documentation, visit our website at: www.lgsolutions.com/products.
Installation Procedure 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. ASSEMBLY and partS Accessories Check your product box for the following items. If an accessory is missing, contact the dealer from whom you purchased the TV. Note: Accessories included may differ from the images below.
Rear Jack Panel Image shown may differ from your TV. 22LQ630H series USB IN 10 .1 .9 14 .6 UPDATE PILLOW SPEAKER .4 RESET AV IN AUDIO/VIDEO .8 13 AUDIO IN SPEAKER CPU SERVICE (RGB/DVI) OUT(8Ω) (SERVICE ONLY) RGB IN (PC) ENGLISH ENG 11 /DVI IN 1 IN ANTENNA IN GAME CONTROLTV-LINK PTC SERVICE / M.P.I. CFG (SERVICE ONLY) 2 12 .7 .5 .3 .2 AUDIO IN USB IN 1 (RGB/DVI) 26/32LQ630H series RGB IN (PC) RESET UPDATE 14 10 11 IN 2 .1 .
Jack Description Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. 2 ANTENNA IN Connect over-the air signals to this jack. 3 PTC SERVICE (SERVICE ONLY) Used for PTC software updates. 4 CPU SERVICE (SERVICE ONLY) Used for CPU software updates. 5 TV - LINK CFG Computer input for programming Free To Guest services. 6 SPEAKER OUT 8Ω For use with external speakers. 7 GAME CONTROL Input port for third party game Controllers. m. p. i.
Setting Up the TV Refer to the appropriate section below to mount the TV on its stand or to a wall. VESA Wall Mounting NOTE LG recommends that wall mounting be yy performed by a qualified professional installer. It is also recommended that you use an LG yy brand wall mount bracket when mounting the TV to a wall. 1 Install the protection cover provided with the TV to protect the area where the TV stand would otherwise be located. Press the protection cover into the TV until you hear it click.
GENERAL TROUBLESHOOTING Installation Symptom Cannot direct enter channel number. Possible Cause(s) (TV in Pass-through Mode) Installer yy Menu item 028 CH. OVERIDE is set to 0, i.e., disabled (recommended setting). Possible Solution(s) If the channel lineup is locked, only channels yy that are active in the TV’s channel lineup can be selected. Set Installer Menu item 028 CH. OVERIDE to 1 to allow access for direct keypad entry to all channels.
Installer Remote Symptom Remote doesn’t work. Possible Cause(s) Remote not in TV Mode. yy Not aimed at IR remote sensor. yy Remote too far from IR sensor. yy MPI not connected. yy IR path to TV’s receiver obstructed. yy Weak batteries. yy Wrong battery polarity. yy Too much light in room. yy Wrong Installer Remote. yy Bed Switch set to wrong bed. yy Possible Solution(s) Use MODE key to select “TV”; puts remote into yy TV Mode. Point remote at TV’s IR receiver on TV.
OPEN SOURCE SOFTWARE NOTICE Product Type Commercial TV Model Number/Range LQ630H-UA Please be informed that LG Electronics products may contain open source software listed in the tables below. Component(s) Those products identified by the Product Type and Model Range above from LG Electronics, Inc. (“LGE”) contain the open source software detailed below. Please refer to the indicated open source licences (as are included following this notice) for the terms and conditions of their use.
The model and serial numbers of the TV are located on the back and/or one side of the TV. Record them below should you ever need service. MODEL SERIAL LG Customer Information Center For inquires or comments, visit www.lg.com or call: 1-888-865-3026 1-888-542-2623 USA, Commercial User CANADA Register your product Online! www.lg.com Pro:Centric is a trademark of LG Electronics U.S.A., Inc. Pro:Idiom is a registered trademark of Zenith Electronics LLC.
