QUICK REFERENCE GUIDE LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. 26LT670H 32LT670H 37LT670H 42LT670H 32LT770H 37LT770H 42LT770H 47LT770H P/NO : MFL67415404 (1206-REV00) www.lgsolutions.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. yy TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on yy or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified yy by the manufacturer. Use only with a cart, stand, tripod, bracket, yy or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
IMPORTANT SAFETY INSTRUCTIONS Warning - To reduce the risk of fire or yy electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. Do not expose to dripping or splashing and yy do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
IMPORTANT SAFETY INSTRUCTIONS If you smell smoke or other odors coming yy from the TV, unplug the power cord and contact an authorized service center. Do not press strongly upon the panel with a yy Supply hand or a sharp objectShort-circuit such as aPower nail, pencil Breaker or pen, or make a scratch on it. Keep the product away from direct sunlight. yy If the TV feels cold to the touch, there may yy be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV.
LICENSES / OPEN SOURCE SOFTWARE NOTICE LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
TABLE OF CONTENTS 7 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS 20 REMOTE CONTROL 6 LICENSES 22 GENERAL TROUBLESHOOTING 6 OPEN SOURCE SOFTWARE NOTICE 23 SPECIFICATIONS 7 TABLE OF CONTENTS 8 INSTALLATION PROCEDURE 8 ASSEMBLING AND PREPARING 8 10 13 13 15 17 18 19 Unpacking Parts and buttons Setting up the TV - Attaching the stand - Mounting on a table - Mounting on a wall - Tidying cables - External speaker out FCC NOTICE This equipment has been tested and found to comply with the li
ASSEMBLING AND PREPARING INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
ASSEMBLING AND PREPARING 9 ENERGY AV MODE INPUT TV SAVING 1 2 3 4 5 6 7 8 9 LIST 0 FLASHBK MARK FAV VOL 3D CH P A G E MUTE MENU INFO Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Quick Reference Guide Power Cord (For 32/37/42LT670H, 32/37/42/47LT770H)) (For 26LT670H) (For 32/37/42LT670H, 32/37/42/47LT770H)) Stand body/Stand base (See p.13) Stand body/Stand base (See p.14) Desk-mount Screw 1 EA, M4 x 20 (See p.
ASSEMBLING AND PREPARING Parts and buttons (For LT670H series) Remote control Power indicator Side Connection panel HDMI input USB IN Buttons (For 26LT670H) IN 3 USB input Screen Buttons (For 32/37/42LT670H) ENGLISH ENG Speakers RJP INTERFACE RESET 1 2 R / DVI IN PTC SERVICE (SERVICE ONLY) Button TV -LINK CFG Description v ^ Scrolls through the saved channels. - Adjusts the volume level.
ASSEMBLING AND PREPARING 11 (For LT770H series) Remote control Side Connection panel Power indicator HDMI input (HUB) IN 3 USB input USB IN 1 USB IN 2 Screen Buttons ENG ENGLISH Speakers SERVICE ONLY UPDATE RJP / DVI IN 2 TV-LINK CFG RESET 1 AUDIO IN (RGB/DVI) GAME CONTROL /MPI R Button ANTENNA/ CABLE IN L RS-232C (SERVICE & EXT_POWER) L/MONO -AUDIO- R SPEAKER OUT (8 ) VIDEO RGB IN (PC) Description v ^ Scrolls through the saved channels. - Adjusts the volume level.
ASSEMBLING AND PREPARING PORT Description RJP INTERFACE Connect to remote jack pack control output port. GAME CONTROL/ Input port for third party game Controllers./ m. p. i. Allows VOD/PPV devices or set-top boxes to control the TV. speaker out (8Ω) For use with external speakers. UPDATE Software downloads and debug mode enable/ dis-able. RESET Hardware reset to PTC microcontroller. RS232C (SERVICE & EXT_POWER) Used by third party devices. This port is used for service or Hotel mode.
ASSEMBLING AND PREPARING 13 Setting up the TV Put your TV on a pedestal stand and mount the TV on a table or wall. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. (For 32/37/42LT670H, 32/37/42/47LT770H) 1 4 EA 2 M4 x 14 Stand Body Front Stand Base Caution 3 4 EA M4 x 14 or Caution Tighten the screws firmly to prevent yy the TV from tilting forward. Do not over tighten.
ASSEMBLING AND PREPARING (For 26LT670H) 1 2 4 EA M4 x 12 Stand Body M4X20 Front CAUTION Stand Base Top View When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 3 ENGLISH ENG 4 EA M4 x 12 CAUTION Tighten the screws firmly to prevent the TV yy from tilting forward. Do not over tighten.
ASSEMBLING AND PREPARING Mounting on a table 15 Securing the TV to a table (For 32/37/42LT670H, 32/37/42/47LT770H) 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation. 10 cm (4 10 cm Fix the TV to a table to prevent from tilting forward, damage, and potential injury. To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand.
ASSEMBLING AND PREPARING Attaching the TV to a desk The TV should be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.
ASSEMBLING AND PREPARING Mounting on a wall 17 Caution Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. 10 cm(4 inch) 10 cm 10 cm Disconnect the power first, and then move yy or install the TV. Otherwise electric shock may occur.
ASSEMBLING AND PREPARING Securing the TV to a wall (optional) Tidying cables (Depending on model) For 32/37/42LT670H, 32/37/42/47LT770H 1 Install the power cord holder and power cord. It will help prevent the power cable from being removed by accident. Power cord holder 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. 2 Gather and bind the cables with the cable holder.
ASSEMBLING AND PREPARING 19 External speaker out Connect the external speaker. RJP INTERFACE RESET 1 2 R / DVI IN ANTENNA/ CABLE IN L SPEAKER OUT (8 ) PTC SERVICE (SERVICE ONLY) L/MONO -AUDIO- R RGB IN (PC) AUDIO IN (RGB/DVI) AV IN VIDEO RS-232C (SERVICE & EXT_POWER) GAME CONTROL /M.P.I DC IN UPDATE TV -LINK CFG RR+ LL+ NOTE ENG ENGLISH Make sure that the external speaker should yy be connected with TV under power-off state.
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control.
REMOTE CONTROL PORTAL Displays and removes the interactive menu. Q.MENU INFO Views the information of the current program and screen. INPUT TV 1 4 7 DVD .,;@ ghi pqrs 2 5 8 MARK abc jkl tuv 0 3 6 9 GUIDE Displays and removes the electronic program guide. Navigation buttons (up/down/left/right) Scrolls through menus or options. def mno OK/ENTER ꔉ Selects menus or options and confirms your input. wxyz ꕣ (BACK) Returns to the previous level.
GENERAL TROUBLESHOOTING GENERAL TROUBLESHOOTING Installation Symptom Cannot direct enter channel number. Possible Cause(s) (TV in Pass-through Mode) Installer yy Menu item 028 CH. OVERIDE is set to 0, i.e., disabled (recommended setting). Possible Solution(s) If Installer Menu item 028 CH. OVERIDE is yy set to 0, only channels that are active in the TV’s channel lineup can be selected. Set CH. OVERIDE to 1 to allow access for direct keypad entry to all channels.
SPECIFICATIONS 23 SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions.
SPECIFICATIONS 42LT670H (42LT670H-UA) MODELS Dimensions (W x H x D) Weight 42LT770H (42LT770H-UA) With stand 991.7 mm x 666.5 mm x 273.1 mm (39.0 inch x 26.2 inch x 10.8 inch) Without stand 991.7 mm x 604.0 mm x 55.0 mm (39.0 inch x 23.8 inch x 2.2 inch) With stand 15.5 kg (34.2 lbs) Without stand 13.5 kg (29.8 lbs) 47LT770H (47LT770H-UA) MODELS Dimensions (W x H x D) Weight With stand 1,101 mm x 728.5 mm x 273.1 mm (43.3 inch x 28.7 inch x 10.8 inch) Without stand 1,101 mm x 665.
CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE yy The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.
The model and serial numbers of the TV are located on the back and/or one side of the TV. Record them below should you ever need service. MODEL SERIAL LG Customer Information Center For inquires or comments, visit www.lg.com or call: 1-888-865-3026 1-888-542-2623 USA, Commercial User CANADA Register your product Online! www.lg.com This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting.
