QUICK REFERENCE GUIDE LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. 26LT670H 32LT670H 37LT670H 42LT670H P/NO : MFL67415403 (1203-REV00) www.lgsolutions.
LICENSES / OPEN SOURCE SOFTWARE NOTICE LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
IMPORTANT SAFETY INSTRUCTIONS 3 IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS ENGLISH ENG Keep the packing anti-moisture material or yy vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
IMPORTANT SAFETY INSTRUCTIONS Generated Sound yy “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.
TABLE OF CONTENTS TABLE OF CONTENTS ENGLISH ENG 2 LICENSES 15 REMOTE CONTROL 2 OPEN SOURCE SOFTWARE NOTICE 17 GENERAL TROUBLESHOOTING 3 IMPORTANT SAFETY INSTRUCTIONS 18 SPECIFICATIONS 6 TABLE OF CONTENTS 6 Additional Information 7 INSTALLATION PROCEDURE 7 ASSEMBLING AND PREPARING 7 9 11 11 12 13 14 Unpacking Parts and buttons Setting up the TV - Attaching the stand - Mounting on a table - Mounting on a wall - Tidying cables Additional Information The Owner’s Manual and Commercial
ASSEMBLING AND PREPARING 7 INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
ASSEMBLING AND PREPARING CAUTION To ensure safety and product life span, do not use any unapproved items. yy Any damages or injuries sustained due to use of unapproved items are not covered by the warranty. yy In the case of some models, the thin film on the screen is a part of TV and should not be removed. yy NOTE The items supplied with your product will vary depending on the model.
ASSEMBLING AND PREPARING 9 Parts and buttons Remote control Power indicator Side Connection panel USB IN USB input Screen IN 3 HDMI input Buttons RJP INTERFACE RESET UPDATE GAME CONTROL /M.P.I 1 2 TV -LINK CFG R / DVI IN PTC SERVICE (SERVICE ONLY) L SPEAKER OUT (8 ) L/MONO -AUDIO- R RGB IN (PC) AUDIO IN (RGB/DVI) AV IN VIDEO RS-232C (SERVICE & EXIT_POWER) Button Description v ^ Scrolls through the saved channels. - Adjusts the volume level.
ASSEMBLING AND PREPARING PORT Description RJP INTERFACE Connect to remote jack pack control output port. GAME CONTROL/ Input port for third party game Controllers./ m. p. i. Allows VOD/PPV devices or set-top boxes to control the TV. speaker out (8Ω) For use with external speakers. UPDATE Software downloads and debug mode enable/ dis-able. RESET Hardware reset to PTC microcontroller. RS232C (SERVICE & EXIT POWER) Used by third party devices. This port is used for service or Hotel mode.
ASSEMBLING AND PREPARING 11 Setting up the TV Put your TV on a pedestal stand and mount the TV on a table or wall. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. 1 4 EA 2 M4 x 14 Stand Body Front Stand Base Caution 3 4 EA M4 x 14 Caution Tighten the screws firmly to prevent yy the TV from tilting forward. Do not over tighten.
ASSEMBLING AND PREPARING Mounting on a table 1 Securing the TV to a table Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation. 10 cm (4 10 cm Fix the TV to a table to prevent from tilting forward, damage, and potential injury. To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand. inch) 10 cm 10 cm warning 2 Connect the power cord to a wall outlet.
ASSEMBLING AND PREPARING Mounting on a wall 13 Caution Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. 10 cm(4 inch) 10 cm Disconnect the power first, and then move yy or install the TV. Otherwise electric shock may occur.
ASSEMBLING AND PREPARING Tidying cables 1 Attaching the TV to a desk Install the power cord holder and power cord. It will help prevent the power cable from being removed by accident. (For 32/37/42LT670H) The TV should be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. 4-Screws (not provided as parts of the product) Power cord holder Stand 2 Gather and bind the cables with the cable holder.
REMOTE CONTROL 15 REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control.
REMOTE CONTROL VOL Adjusts the volume level. CC, CHAR/NUM CC: Selects a closed caption. CHAR/NUM: Switches between Letter and Number input modes. Q.MENU BANK CH.PREVIEW TV 1 4 7 INPUT DVD .,;@ ghi pqrs 2 5 8 abc jkl tuv 0 MARK 3 6 9 , DELETE MUTE MUTE: Mutes all sounds. DELETE: Deletes letters and numbers. def ^ CH v, PAGE CH: Scrolls through the saved channels. PAGE: Moves to the previous or next screen. mno wxyz PORTAL Displays and removes the interactive menu.
TROUBLESHOOTING 17 GENERAL TROUBLESHOOTING Installation Symptom Cannot direct enter channel number. Possible Cause(s) (TV in Pass-through Mode) Installer yy Menu item 028 CH. OVERIDE is set to 0, i.e., disabled (recommended setting). Possible Solution(s) If Installer Menu item 028 CH. OVERIDE is yy set to 0, only channels that are active in the TV’s channel lineup can be selected. Set CH. OVERIDE to 1 to allow access for direct keypad entry to all channels.
SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions.
SPECIFICATIONS 19 RGB(PC), HDMI (PC) supported mode Resolution Horizontal Vertical Frequency (KHz) Frequency (Hz) 640x350 31.46 70.09 720x400 31.46 70.08 640x480 31.46 59.94 800x600 37.87 60.31 1024x768 48.36 60.00 1280x768 47.77 59.87 1360x768 47.71 60.01 1280x1024 63.98 60.02 1600x1200 75.00 60.00 1920x1080 RGB-PC 66.58 59.93 1920x1080 HDMI-PC 67.50 60.00 Except 26/32LT670H-UA HDMI (DTV) supported mode Resolution Horizontal Vertical Frequency (KHz) Frequency (Hz) 31.
Instructions for how to use the TLL-1100A TVyour set and retain it for future reference. Link Loader to copy and clone a Master TV setup is provided in the operation manual supplied with TV-Link Loader Prior to cloning the Public Display Mode Setup, be sure to set up all the other TV features that should be included in the master TV setup. This includes channel adding-deleting, video and audio menu setups and other TV features that are clonable. Refer to the TV installation guide for specific details.
