ENGLISH OWNER’S MANUAL IPS LED MONITOR Please read this manual carefully before operating your set and retain it for future reference. IPS LED MONITOR MODEL 22EA63V 23EA63V 27EA63V www.lg.
TABLE OF CONTENTS Contents ENGLISH ENG 3 ASSEMBLING AND PREPARING 3 Unpacking 4 Parts and buttons 5 Setting up the Monitor set 5 - Attaching the Stand Base 5 - Detaching the Stand Base 6 - Mounting on a table 8 - Mounting on a wall 9 USING THE MONITOR SET 9 Connecting to a PC 9 - D-SUB connection 9 - DVI-D connection 9 - HDMI connection 11 CUSTOMIZING SETTINGS 12 Customizing Settings 12 - Menu Settings 13 - Picture 14 - Color 15 - Display 15 - Volume 16 - Others
ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card DVI-D Cable (This cable is not included in all countries.) D-SUB Cable (This cable is not included in all countries.
ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator yyLighting On: Turned on yyLighting Off: Turned off (Power Button) Button (See p.11) Connection panel (See p.
ASSEMBLING AND PREPARING Detaching the Stand Base Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 2 CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. 2 1 Pull out the Stand Body and Stand Base from the monitor set. 2 Turn the screw to the left with a coin. 3 Pull out the Stand Base.
ASSEMBLING AND PREPARING Mounting on a table 3 Press (Power) button on the bottom switch ENGLISH ENG panel to turn the power on. 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. 10 cm 10 cm 10 cm 10 cm 2 Connect the AC-DC Adapter and Power Cord to a wall outlet.
ASSEMBLING AND PREPARING warning Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Connect the Kensington security system cable between the Monitor set and a table. Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture.
ASSEMBLING AND PREPARING Mounting on a wall Model ENGLISH ENG For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
USING THE MONITOR SET 9 USING THE MONITOR SET Your Monitor set supports Plug & Play*. yy *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. DVI-D connection Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations. D-SUB connection Transmits analog video from your PC to the Monitor set.
USING THE MONITOR SET CAUTION ENGLISH ENG Connect the signal yy input cable and tighten it by turning the screws clockwise. Do not press the screen with your finger for yy a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the yy screen for a long period of time to prevent image burn. Use a screensaver if possible. NOTE When you want to use two PC in our Monitor, yy please connect the signal cable(D-SUB/ DVI-D/HDMI) respectively in Monitor set.
CUSTOMIZING SETTINGS 11 CUSTOMIZING SETTINGS 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Select Exit to leave the OSD menu. MENU MY KEY FUNC. AUTO INPUT EXIT Monitor set Buttons Button Description Accesses the main menus.(See p.12) OSD Locked/OSD Unlocked This function allows you to lock the current control settings, so that they cannot be inadvertently changed.
CUSTOMIZING SETTINGS Customizing Settings ENGLISH ENG Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the "Next Menu" button to enter the more option settings. 4 Select Exit to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 13 Picture ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Enter to Picture by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼ buttons. 5 Select Exit to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS Color ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Select Color by pressing the ► button. 4 Enter to Color by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select Exit to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 15 Display ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Select Display by pressing the ► button. 4 Enter to Display by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select Exit to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS Others ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Select Others by pressing the ► button. 4 Enter to Others by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select Exit to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 17 MY KEY Setting ENG ENGLISH 1 Press MY KEY button on the bottom of the Monitor set to display the MY KEY OSD. 2 Set the options by pressing the ◄or►or▼buttons. 3 Select Exit to leave the OSD menu. Each option is explained below. MY KEY Description MY KEY Setting MY KEY is short key. You can select one of FUNC. (Picture Mode, SUPER ENERGY SAVING, DUAL DISPLAY, DUAL WEB) as your favorite feature. Back Select Back to return MY KEY menu.
CUSTOMIZING SETTINGS FUNC. Setting ENGLISH ENG Picture Mode 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Enter to Picture Mode by pressing the ▼ button. 3 Set the options by pressing the ◄ or ► buttons. 4 Select Exit to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow( )button. Each option is explained below. Picture Mode Description Custom It is a mode that the user can adjust each element.
CUSTOMIZING SETTINGS 19 SUPER ENERGY SAVING ENG ENGLISH 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select SUPER ENERGY SAVING by pressing the ► button. 3 Enter to SUPER ENERGY SAVING by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼buttons. 5 Select Exit to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS * Before using below functions, please install DUAL SMART SOLUTION programme. ENGLISH ENG DUAL DISPLAY 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select DUAL DISPLAY by pressing the ► button. 3 Enter to DUAL DISPLAY by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Select Exit to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 21 MY KEY Setting ENG ENGLISH 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select MY KEY Setting by pressing the ► button. 3 Enter to MY KEY Setting by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Select Exit to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
TROUBLESHOOTING ENGLISH ENG TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected? yy Check and see if the power cord is connected properly to the power outlet. Is the power indicator light on? yy Press the Power button. yy Adjust the brightness and the contrast.
TROUBLESHOOTING 23 CAUTION Display image is incorrect The screen color is mono or abnormal. yy Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. yy Make sure the video card is properly inserted in the slot. yy Set the color setting higher than 24 bits (true color) at Control Panel ► Settings. The screen blinks. yy Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
SPECIFICATIONS SPECIFICATIONS ENGLISH ENG 22EA63V Display Screen Type Sync Input Pixel Pitch Horizontal Frequency Vertical Frequency Video Input Resolution Plug & Play Power Consumption Power Input AC-DC Adapter 54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 54.6 cm 0.247 mm x 0.247 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Input Form Separate Sync.
SPECIFICATIONS 25 SPECIFICATIONS Display Screen Type Sync Input Pixel Pitch Horizontal Frequency Vertical Frequency Video Input Resolution Plug & Play Power Consumption Power Input AC-DC Adapter 58.4 cm (23 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 58.4 cm 0.265 mm x 0.265 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Input Form Separate Sync.
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS 27EA63V Display Screen Type Sync Input Pixel Pitch Horizontal Frequency Vertical Frequency Video Input Resolution Plug & Play Power Consumption Power Input AC-DC Adapter 68.6 cm (27 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 68.6 cm 0.3114 mm x 0.3114 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI-D) 56Hz to 61Hz (HDMI) Input Form Separate Sync.
SPECIFICATIONS 27 Preset Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.023 75 +/+ 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60 +/+ 1280 x 1024 79.976 75 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.
Proper posture ENGLISH ENG Proper posture Proper posture for using the Monitor set. Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the location of the Monitor set to avoid it reflecting light.
Declaration of Conformity Trade Name: LG Model : 22EA63VB,23EA63VB,27EA63VB Responsible Party: LG Electronics Inc. Address : 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534 *above information is only for USA FCC Regulatory Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET.