ENGLISH OWNER’S MANUAL LED MONITOR (LED TOUCH MONITOR) Please read this manual carefully before operating your set and retain it for future reference. LED MONITOR(LED TOUCH MONITOR) MODEL LIST 23ET83V www.lg.
TABLE OF CONTENTS TABLE OF CONTENTS ENGLISH ENG 3 LICENSE 4 20 TROUBLESHOOTING ASSEMBLING AND PREPARING 23 SPECIFICATIONS 4 Unpacking 24 Preset Modes (Resolution) 5 Parts and buttons 24 HDMI TIMING 6 Moving and Lifting the Monitor 24 Indicator 6 Setting up the Monitor 6 - Mounting on a table 8 - Tidying cables 25 PROPER POSTURE 25 Proper Posture for Using the Monitor 9 USING THE MONITOR 9 Connecting to a PC 9 - D-SUB connection 9 - HDMI connection 11 - USB cable-P
LICENSE 3 LICENSE The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ENG ENGLISH Each model has different licenses. Visit www.lg.com for more information on the license.
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING ENGLISH ENG Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card D-SUB Cable (This cable is not included in all countries.) A-B Type USB 2.
ASSEMBLING AND PREPARING 5 Parts and buttons ENG ENGLISH Power Indicator Lighting On: Turned on (Red) yy Lighting Off: Turned off yy (Power Button) SES MODE Button H/P USB UP HDMI 2 DC-IN (19 V ) HDMI 1 D-SUB IN Connection panel
ASSEMBLING AND PREPARING ENGLISH ENG Moving and Lifting the Monitor Setting up the Monitor When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation regardless of its shape or size. Mounting on a table CAUTION 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. As much as possible, avoid touching the yy monitor screen.
ASSEMBLING AND PREPARING 3 Press the (Power) button on the front panel NOTE CAUTION 25 25 Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. WARNING To avoid injury to the fingers when adjusting the screen, do not hold the upper part of the stand as shown below. Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.
USING THE MONITOR Tidying cables ENGLISH ENG Gather and bind the cables with the supplied cable tie. Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Connect the Kensington security system cable between the Monitor set and a table. NOTE The Kensington security system is optional.
USING THE MONITOR 9 USING THE MONITOR HDMI connection Your Monitor supports Plug & Play. When connected to a PC and turned on, the device will connect automatically without configuration or user intervention. Transmits the digital video and audio signals from your PC or A/V to the Monitor. Connect the PC or A/V and the Monitor with the HDMI cable as shown in the following illustrations. ENG ENGLISH Connecting to a PC D-SUB connection H/P Transmits analog video from your PC to the Monitor set.
USING THE MONITOR CAUTION ENGLISH ENG Connect the signal yy input cable and tighten it by turning the screws clockwise. Do not press the screen with your finger for yy a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the yy screen for a long period of time to prevent image burn. Use a screensaver if possible. NOTE When connecting the power cord to the outyy let, use a grounded (3-hole) multi-socket or a grounded power outlet.
USING THE MONITOR Headphone port connection To use the touch screen, connect the USB port to the PC. Use a USB 2.0 cable with A-B type to connect your PC. (The USB port on the monitor is only for the touch screen feature.) Use the headphone port to connect a peripheral device to the monitor. Connect as illustrated. D-SUB OUT (sold separately) UP H/P USB UP HDMI 2 HDMI 1 D-SUB IN H/P USB UP HDMI 2 HDMI 1 D-SUB IN NOTE Peripheral devices are sold separately.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS ENGLISH ENG 1 Press the desired button on the bottom of the Monitor. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Select EXIT to leave the OSD menu. MENU SES MODE AUTO INPUT EXIT Monitor set Buttons Button Description Accesses the main menus.
CUSTOMIZING SETTINGS 13 Customizing Settings MENU ENG ENGLISH Menu Settings BRIGHTNESS CONTRAST 1 Press MENU button on the bottom of the Monitor to WIDE WIDE / ORIGINAL display the MENU OSD. RESET NO 2 Set the options by pressing the ◄ or ► or ▼ buttons. NEXT MENU 3 Select the "NEXT MENU" button to enter the more option settings. MENU > NEXT MENU > PICTURE 4 Select EXIT to leave the OSD menu. SHARPNESS To return to the upper menu or set other menu items, use the up arrow ( ) button.
CUSTOMIZING SETTINGS PICTURE ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more MENU > NEXT MENU > PICTURE option settings. SHARPNESS 3 Select PICTURE by pressing the ► button. BLACK LEVEL OVER SCAN 4 Enter to PICTURE by pressing the ▼ button. HIGH OFF 5 Set the options by pressing the ◄ or ► or ▼ buttons. EXIT 6 Select EXIT to leave the OSD menu.
CUSTOMIZING SETTINGS 15 COLOR set to display the MENU OSD. 2 Select the "NEXT MENU" button to open more option settings. MENU > NEXT MENU > COLOR GAMMA GAMMA 1 COLOR TEMP CUSTOM ENG ENGLISH 1 Press the MENU button on the bottom of the Monitor RED GREEN BLUE 3 Select COLOR by pressing the ► button. 4 Open COLOR by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ MENU > NEXT MENU > COLOR buttons. SIX COLOR 6 Select EXIT to leave the OSD menu.
CUSTOMIZING SETTINGS DISPLAY ENGLISH ENG MENU > NEXT MENU > DISPLAY 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. HORIZONTAL VERTICAL 2 Select the "NEXT MENU" button to enter the more CLOCK option settings. PHASE 3 Select DISPLAY by pressing the ► button. 4 Open DISPLAY by pressing the ▼ button. EXIT 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu.
CUSTOMIZING SETTINGS 17 OTHERS ENG ENGLISH MENU > NEXT MENU > OTHERS 1 Press MENU button on the bottom of the Monitor to display the MENU OSD. LANGUAGE 2 Select the "NEXT MENU" button to enter the more option settings. ENGLISH POWER INDICATOR ON AUTOMATIC STANBY OFF RESPONSE TIME FAST 3 Select OTHERS by pressing the ► button. D-SUB 1920 X 1080 60HZ 4 Enter to OTHERS by pressing the ▼ button. EXIT 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu.
CUSTOMIZING SETTINGS SUPER ENERGY SAVING SUPER ENERGY SAVING ENGLISH ENG 1 Press SES button on the bottom of the Monitor to display the SUPER ENERGY SAVING OSD. 2 Set the options by pressing the ◄ or ► buttons. High Low Off Reset Power Reduction : 6W CO2 Reduction : 4g 3 Select EXIT to leave the OSD menu. EXIT Each option is explained below. SUPER ENERGY SAVING Description High Enables SUPER ENERGY SAVING you can save energy with this energy- high efficient function.
CUSTOMIZING SETTINGS Picture Mode 19 Picture Mode display the Picture Mode OSD. 2 Set the options by pressing the ◄ or ►buttons. Custom Text Photo Cinema Game 3 Select EXIT to leave the OSD menu. EXIT Each option is explained below. Picture Mode Description PC Mode Custom Allows the user to adjust each element. The color mode of the main menu can be adjusted. Text Optimizes the screen for document processing. Photo Optimizes the screen to view photos.
TROUBLESHOOTING ENGLISH ENG TROUBLESHOOTING Nothing is displayed on the screen. Is the monitor's power cord plugged yy Check if the power cord is correctly plugged in to the power outlet. in? Is the power indicator on? yy Check the power cable connection and press the power button. Is the power indicator displaying red? yy Check that the connected input is enabled (Menu - Input).
TROUBLESHOOTING 21 yyCheck Control Panel ► Display ► Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. yyIf the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. yySettings can differ between computer and O/S (Operation System), and resolution mentioned above may not be supported by every video card.
TROUBLESHOOTING Touch does not respond when the desktop is extended to a second touch monitor. ENGLISH ENG In Windows 7 and Windows 8, you can configure the second monitor as the touch screen as shown below.
SPECIFICATIONS LCD Screen Resolution Video Signal Input Connector Power AC/DC adaptor Dimension/ Weight Stand Angle Adjustment Environmental Conditions Type 58.42 cm TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Screen Diagonal length of the screen: 58.42 cm Pixel Pitch 0.2652 mm x 0.
SPECIFICATIONS Preset Modes (Resolution) ENGLISH ENG Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.023 75 +/+ 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60 +/+ 1280 x 1024 79.976 75 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.
PROPER POSTURE 25 Proper Posture for Using the Monitor Adjust the screen so that you can comfortably view at a slight downward angle from your natural eye level. Take a break for approximately ten minutes every hour to reduce any fatigue caused by long-time usyy age. The stand of the touch monitor allows the product to be used in the optimum position. yy Adjust the stand angle from -5° to 25° to obtain the best view of the screen. You should be looking slightly down at the screen.
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.