Owner's Manual

42
• Bitstream: Select Bitstream if you
connect the DVD Player’s DIGITAL
OUT jack to an amplifier or other
equipment with a Dolby Digital, DTS or
MPEG decoder.
•
PCM (Pulse Code Modulation):
Select when connected to a two-chan-
nel digital stereo amplifier. DVDs
encoded in Dolby Digital, DTS or
MPEG will be automatically down-
mixed to two-channel PCM audio.
Each DVD disc has a variety of audio output options.
Set the player’s AUDIO options according to the type of audio system you use.
Dolby Digital / DTS / MPEG
Press the MENU button twice and then use the
DD
/
EE
button to select
AUDIO.
Press the
GG
button and then use
DD
/
EE
button to select Dolby Digital / DTS
/ MPEG.
Press the
GG
button and then use
DD
/
EE
button to select Bitstream or PCM.
Press the OK button.
Press the EXIT button to exit the menu.
Dolby Digital
DTS
MPEG
Sample Freq.
DRC
Vocal
Bitstream
PCM
1
2
3
4
5
AUDIO
Move G Select
FF
Prev.
D
E
Dolby Digital
GG
DVD-V
DivX
- If your receiver or amplifier is NOT
capable of handling 96 kHz signals,
select 48 kHz. When this choice is
made, this unit automatically converts
any 96 kHz signals to 48 kHz so your
system can decode them.
If your receiver or amplifier is capable
of handling 96 kHz signals, select 96
kHz. When this choice is made, this
unit passes each type of signal
through without any further process-
ing.
Check the documentation for your
amplifier to verify its capabilities.
Sample Freq. (Frequency)
Press the MENU button twice and then use the
DD
/
EE
button to select
AUDIO.
Press the
GG
button and then use
DD
/
EE
button to select Sample Freq..
Press the
GG
button and then use
DD
/
EE
button to select 48KHz or 96KHz.
Press the OK button.
Press the EXIT button to exit the menu.
Dolby Digital
DTS
MPEG
Sample Freq.
DRC
Vocal
48KHz
96KHz
1
2
3
4
5
AUDIO
Move G Select
FF
Prev.
D
E
Sample Freq.
GG
DVD-V
DVD Menu options -
DVD Menu options -
AUDIO
AUDIO
DVD operation
DVD operation