User's Guide

12
ENG
ENGLISH
ASSEMBLING AND PREPARING
Adjusting the angle
1
Place the monitor in an upright position, mounted
on the stand base.
2
Adjust the angle of the screen. The angle of the
screen can be adjusted forwards or backwards for a
comfortable viewing experience.
Front SideRear Side
y
To avoid injury to the fingers when adjusting the
screen, do not hold the lower part of the moni-
tor's frame as illustrated below.
WARNING
y
Be careful not to touch or press the screen area
when adjusting the angle of the monitor.
Adjusting the Stand Height
1
Handle the monitor with both hands for safety.
2
Remove the tape attached to the bottom
back of the stand body and then pull out the
locking pin while pressing the head downward.
3
The height can be adjusted up to 130.0 mm.
Stand Body
130.0 mm
y
Do not put your fingers or hand
between the screen and the base
(chassis) when adjusting the
screen's height.
WARNING
Tape
Locking Pin