Installation Manual
11
206-4298
Pro:Centric Operation (Cont.)
Pro:Centric Setup
Administration and management options for the Pro:Centric server are described in detail in the
Pro:Centric Server Admin Client User Guide. This document describes only those settings that must
be specied on the TVs to enable Pro:Centric remote management and/or the Pro:Centric application.
• Remote management (TV E-Z Installation): The Pro:Centric server Admin Client provides remote
management facilities for downloading splash screen image and software/firmware updates as well as
facilities for downloading a Clone/Conguration (.tlx) file for FTG Mode configuration.
• Pro:Centric application: The application, which operates in conjunction with FTG and PPV Modes,
comprises the Pro:Centric interactive menus/features described on the previous page. Pro:Centric
application settings are managed via the Pro:Centric server Admin Client.
The Pro:Centric server settings can be congured using one of the methods described below.
Note: If using a Pro:Centric pillow speaker, also set Installer Menu item 027 HOSPITAL MODE to the
required value.
TV in Factory Default State
When the TV is in a factory default state, LG’s Setup Wizard (see pages 12 to 13) provides automated or
manual options for conguring the Pro:Centric server settings. The EZ-Manager branch of the Setup
Wizard also provides a USB conguration option that enables you to congure a TV for FTG Mode using
a Clone/Conguration (.tlx) le stored on a USB memory device. The “.tlx” le incorporates FTG Installer
Menu settings, including Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL, which are
used to set up the TV’s Pro:Centric feature.
Note: If Pro:Centric data delivery will be over IP, there is a Domain Name System (DNS) server at the
site, and you intend to use the EZ-Manager Wizard to set up the TV, you can create a DNS entry
“procentric.local” for the Pro:Centric server that will enable automated Pro:Centric IP conguration via the
EZ-Manager. If there is no DNS entry for procentric.local, you will need to manually enter the Pro:Centric
server IP address and port number during conguration.
TV in Pass-through Mode
If the TV is in Pass-through Mode, either:
• Set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL to the appropriate values.
See Installer Menu information on pages 36 to 46 for further details. Also, as necessary, refer to “Custom
Master TV Setup” on pages 47 to 49 and/or cloning information on pages 50 to 55.
• Congure the appropriate Pro:Centric server settings in the IP Environment / Pro:Centric Menu. You must
use this option, in particular, if you wish to congure IP settings for the Pro:Centric server. See “Accessing
the IP Environment Menu” on page 62 and “Pro:Centric Setup” on pages 66 to 67 for further information.
Note: When the TV is in either Pass-through Mode or FTG Mode, you can also leave Installer Menu item
119 DATA CHANNEL set to its default value (255) to enable the TV’s Data Channel Auto Search feature to
set the DATA CHANNEL value. See item 119 description on page 46 for additional information.
TV in FTG Mode
If the TV is in FTG Mode, use the FTG File Manager software to update Installer Menu items #98 Pro:Centric
and #119 Data Channel (along with their afliated elds). Then, transfer the FTG Installer Menu settings to
the TV. Refer to the FTG Mode overview on pages 7 to 8 for further information on FTG Mode operation and
conguration. Also see note above regarding the option to use the TV’s Data Channel Auto Search feature to
set the DATA CHANNEL value.