Installation Manual
22
206-4298
EZ-Manager Wizard (Cont.)
(Continued from previous page)
Select the file(s) to download, and then select UPDATE below.
Logo Image Download
Splash Image ProC.jpg
Update TV Software
LW760M_CPU_SW.epk
Update PTC Software
LW760M_PTC_SW.txt
Import Clone File
LW760M_IM.tlx
UPDATE
USB DEVICE
EXIT
Splash Image ProC
.jpg Splash Image 2.jpg
TVMANAGER
USB 1:
Device Name
Ez Download
Logo Image Download
Update TV Software
Update PTC Software
Import Clone File
Diagnostics
<
>
Note: You can select the EXIT button at the top right corner of the screen and press OK on the
Installer Remote at any time to return to the EZ-Manager Wizard.
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
3. If more than one USB memory device is currently connected to the TV, be sure to select the
USB device that contains the le(s) you wish to use. If necessary, use the arrow keys on the
Installer Remote to select/highlight the USB DEVICE button at the top right of the screen and
press OK. Then, use the Up/Down arrow keys to select the appropriate USB device from the
pop-up list of USB devices displayed at the top of the screen.
4. Select the appropriate option from the TV Manager, and initiate the desired download(s).
Update progress will be displayed on the screen. Do NOT remove the USB device while
updates are in progress. When the update process is complete, the TV will reboot. Upon restart,
depending on the type of update(s) completed, either the EZ-Manager TV Configuration Options
screen will be redisplayed (software and/or splash screen image updates only) or the TV will
tune according to the Start Channel setting in the Installer Menu (TV configured with Clone/
Configuration file).
Note: If the TV Configuration Options screen is redisplayed (software and/or splash screen
image updates only), you can either proceed with configuration via the EZ-Manager Wizard or
exit the EZ-Manager Wizard, as required.
5. Remove the USB memory device, and verify that the appropriate configuration/update(s) is/are
resident on the TV.