Installation Manual

206-4298

Initiate the Express Script

Note: While the Express Script enables you to set up TVs individually in lieu of cloning, you can also

use the resulting Express Script TV Setup for cloning purposes, if desired (see “Exporting a Clone

File” on pages 50 to 52 for further information). However, note that TV setup menu customization

via the Express Script is limited to Channels Menu options.

After you select the “Express Script” option from the Setup Wizard Welcome screen, an Express

Script Welcome screen provides a brief introduction to the Express Script.

WELCOME TO THE EXPRESS SCRIPT

EXIT



Use the Express Script to conﬁgure the TV for Free-To-Guest (FTG) via CPU operation (including pillow speaker

setup). If a Pro:Centric server is installed, the Express Script also enables you to conﬁgure the Pro:Centric settings

on the TV.

Select NEXT to continue.



If you do not wish to use the Express Script to conﬁgure this TV, you may exit the wizard.

Select EXIT to quit.

From the Express Script Welcome screen, you have the following options:

• To proceed with the Express Script, use the Left/Right arrow keys on the Installer Remote to

select NEXT. Then, press OK on the Installer Remote.

Note: Select this option even if you only intend to congure the Pro:Centric settings on this TV.

After you congure the Pro:Centric settings, you will have the option to exit without completing

the remainder of the wizard, if desired.

• To exit the Express Script without completing any conguration, use the Left/Right arrow keys

on the Installer Remote to select EXIT, and then press OK. In the conrmation pop-up window,

select OK, and then press OK once more on the Installer Remote.

Congure Pro:Centric Settings

The next screen enables you to set up the Pro:Centric feature of the TV (see screen examples

on following page). By default, the Data Channel is congured for Auto Search, which enables

the TV’s Data Channel Auto Search feature to set the Data Channel value. See item 119 DATA

CHANNEL description on page 46 for further information on the Data Channel Auto Search

feature. The Pro:Centric Application Mode default setting is “Conguration Only,” which enables

remote management only. That is, the TV will search for TV E-Z Installation data downloads;

however, Pro:Centric application data will not be downloaded, i.e., Installer Menu item 098

PRO:CENTRIC will be set to 0.

Express Script

(Continued on next page)