Installation Manual

206-4298

Express Script (Cont.)

(Continued from previous page)

Note: If, for any reason, you elect to re-run Auto Tuning after customizing channels

in the Edit the Channel Lineup screen, your current custom channel settings will be

lost, and you will need to replicate the desired customization.

Use the arrow keys to navigate between the elds in this screen:

• Channel/Input: Edit the channel lineup, as necessary. Use the Left/Right arrow keys on the

Installer Remote to select channels (including Aux inputs), and press OK to delete (or re-add)

channels per the installation site requirements.

Note: When a channel is active in the channel lineup (i.e., added), all additional elds in this

screen are selectable/available. If a channel is deleted, all other elds in this screen become

inaccessible (grayed out).

• Channel Label: Press OK to display the pop-up virtual alphanumeric keyboard, and add a

custom text label for each channel/Aux input (up to 17 characters), as desired.

• Channel Icon: This eld enables you to select the appropriate trademark/icon for each

channel’s Channel-Time on-screen display. If known, you can direct enter the icon number

using the number keys on the Installer Remote. Otherwise, use the arrow keys on the Installer

Remote to select/highlight either the left (<) or right (>) arrow in the Channel Icon eld, and

press OK until the desired logo is shown. Icons are available for familiar channels, such as

ABC, CBS, NBC, etc. Identiable icons should enable the end user to readily know what

common networks are available.

• Channel Banks: Use the arrow keys to dene channel banks, as desired. See “Channel

Banks Overview” on following page for additional information.

When you are nished, use the arrow keys to select NEXT, and then press OK.

6. In the Channel Tuning/Channel Banner screen, use the Up/Down arrow keys on the Installer

Remote to highlight/select the appropriate channel tuning/channel banner display format

option—either Logical (default) or Physical—for the installation site. When you have made your

selection, use the arrow keys to select NEXT, and then press OK.

CHANNEL TUNING/CHANNER BANNER

BACK

EXIT

Select the desired channel tuning/channel banner display format:

Logical

Physical

(Continued on next page)