Installation Manual

35
206-4298
Ez Download Utility (Cont.)
(Continued from previous page)
11. Remove the USB memory device, and verify that the appropriate configuration/update(s) is/are
resident on the TV.
Note: If you updated the TV configuration with a Clone/Conguration file, upon restart, the TV
tunes according to the Start Channel setting in the Installer Menu. If a Start Channel is specied,
the TV will tune to that channel, though in the case of FTG Mode conguration, a channel banner
will only be displayed if the Start Channel is included in the FTG Channel Map (depending on your
selection in step 9, the channel banner will display either the Start Channel’s logical channel
number or physical RF channel number). Otherwise, the TV will either return to the last channel
tuned (TV in Pass-through Mode) or tune to the rst channel in the FTG Channel Map (TV in
FTG Mode). In the latter case, remember that the channels in the FTG Channel Map are always
arranged in logical order, regardless of your selection in step 9.