Installation Manual
49
206-4298
Picture
Sound
Channels
General
Safety
Accessibility
PICTURE
Smart Picture Mode
O
Picture Mode Settings
Aspect Ratio
16:9
Picture Test
^
Custom Master TV Setup (Cont.)
(Continued from previous page)
Navigate to Installer Menu item 119 DATA CHANNEL, and press
2-5-3 + MENU to launch the IP Environment Menu. Then, complete
network conguration as required. In particular, if you intend to use
the Wi-Fi Zoning feature, you must congure the wireless network
connection as part of the Master TV Setup. See “IP Environment
Setup” on pages 62 to 69 for further information.
4. Set up TV features.
On-screen setup menus control the features of the TV. Press MENU
on the Installer Remote, and select the Advanced menu icon
from the Quick Settings Menu to access the advanced TV setup
menus. Then, set Picture, Sound, Channels, etc. options to the
desired configurations. See “Clonable TV Setup Menu Features” list
on page 47 and also notes below.
Note: If you intend to use the Zoning feature(s) on this TV, make sure
to assign the appropriate TV Zone # and/or Wi-Fi Zone # at this time
as described in Reference section, “Using the TV’s Zoning Features.”
Note: If desired and if appropriate, you can run Auto Tuning (see
step 5) prior to completing this step.
5. (Optional) Run Auto Tuning.
If you are creating a Master TV Setup for cloning purposes and you
want the Target TV(s) to remain in Pass-through Mode, do NOT run
Auto Tuning. If you export a Master TV Setup that includes an auto-
tuned/edited channel lineup, thereby creating a Clone (.tlx) file with
an FTG Channel Map, and then import the Clone file to a Target TV,
this will put the Target TV in FTG Mode.
Note: When you import a Clone/Configuration (.tlx) file that contains
an FTG Channel Map on a Target TV (for FTG Mode configuration),
depending on the types of channels included in the Channel Map,
you may have the option to select either logical or physical channel
tuning. For either selection, the channel sequence will be based on
the order in which the channels appear in the FTG Channel Map.
You can view and/or edit the channel sequence in the FTG File
Manager, as required.
a) Use the Installer Remote to access the Channels Menu. Then,
select Channel Tuning and follow the on-screen instructions to
search for all available digital and analog channels.
b) Use the Channel Manager option in the Channels Menu to edit
the channel lineup, as necessary. Add/delete channels per your
system requirements.
6. Verify the TV setup.
Make sure the TV features are set per your requirements. Also, if
applicable, verify that the channel lineup is correct.
The Master TV Setup is now ready to be saved (exported) to a USB
memory device. See “Cloning Procedures” on pages 50 to 55.
Use the TV setup menus to set
the TV features to the desired
configuration for the end user.
This example illustrates the
advanced TV setup menus.
(Optional) Use Channels Menu
options to run Auto Tuning and
edit the channel lineup.
CHANNELS
^
^
Channel Tuning
Channel Manager
Channel Label
Multi Audio
MONO
(
MONO
)
Audio Language
None
PICTURE
^
Picture
Sound
Channels
General
Safety
Accessibility