Installation Manual

54
206-4298
Cloning Procedures (Cont.)
(Continued from previous page)
Note: In order for the proper location-specic TV Zone and/or Wi-Fi Zone prole
data to be applied, the Zone designation(s) must be assigned in the Target TV(s)
BEFORE importing is initiated.
4. Insert the USB memory device with the Clone/Conguration (.tlx) le into either of the USB
ports on the Target TV.
5. Press MENU on the Installer Remote to display the TV setup menus (TV is in Pass-through
Mode) or the Function Menu (TV is already in FTG Mode).
6. (TV in Pass-through Mode only) From the Quick Settings Menu displayed at the right of the
screen, select the Advanced menu icon and press OK to access the advanced TV setup
menus.
7. Use the arrow navigation keys to select/highlight either the General menu icon from the TV
setup menus or the Safety menu icon from the Function Menu. Then, press the number “7” key
a total of seven times to access the TV Manager.
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
Select the file(s) to download, and then select UPDATE below.
Logo Image Download
Splash Image ProC.jpg
Update TV Software
LW760M_CPU_SW.epk
Update PTC Software
LW760M_PTC_SW.txt
Import Clone File
LW760M_IM.tlx
UPDATE
USB DEVICE
EXIT
Splash Image ProC .jpg Splash Image 2.jpg
TVMANAGER
USB 1: Device Name
Ez Download
Logo Image Download
Update TV Software
Update PTC Software
Import Clone File
Diagnostics
<
>
8. If more than one USB memory device is currently connected to the TV, be sure to select the
USB device that contains the “.tlx” le you wish to use. If necessary, use the arrow keys on
the Installer Remote to select/highlight the USB DEVICE button in the top right corner of the
screen and press OK. Then, use the Up/Down arrow keys to select the appropriate USB
device from the pop-up list of USB devices displayed at the top of the screen.
USB Device
USB 1: Device 1
USB 2: Device 2
9. Use the Up/Down arrow keys to select Import Clone File, and then press OK.
A list of the “.tlx” les stored in the root folder of the USB memory device will be displayed on
the screen.
(Continued on next page)