Installation Manual

6
206-4298
Pass-through Mode
This mode allows you to configure individual TVs for Pro:Centric and/or FTG Mode operation or create a
Master TV Setup for cloning purposes. This mode also allows external control via the MPI port on the TV
rear jack panel.
There are three methods for configuring individual TVs that are currently in Pass-through Mode: using
one of the two LG Setup Wizard options or using the Custom Master TV Setup procedure as described in
this document.
LG Setup Wizard Conguration
When the TV is in a factory default state, the LG Setup Wizard provides the following two conguration
options:
• The EZ-Manager Wizard provides automated or manual options for conguring Pro:Centric operation
and also provides the option to congure the TV using a USB memory device.
• The Express Script provides streamlined conguration of the TV for FTG Mode operation (including
pillow speaker setup) and also provides the option to congure the TV for Pro:Centric operation.
See “LG Setup Wizard” on pages 12 to 13 for further information.
Custom Master TV Setup
Unlike the guided process above, the Custom Master TV Setup procedure enables you to create a
customized Master TV Setup for cloning purposes for TVs that are to remain in Pass-through Mode. Use
the Installer Remote to congure Installer Menu items as required for TV operation and set up TV features
(Picture, Sound, Channels, etc.). See “Custom Master TV Setup” on pages 47 to 49 for detailed information.
Commercial Mode Overview
This document describes how to set up LW760M Pro:Centric
®
TVs for Commercial Mode operation.
LG commercial TV functionality is based on “ownership” of the Channel Map; that is, the Channel Map
resides in the TV’s CPU or Protocol Translation Controller (PTC) or it resides externally from the TV (i.e.,
in a device from the solution provider).
These TV models are capable of Free-To-Guest (FTG) Mode operation via the TV CPU. Alternatively, the
TV can be configured for Pass-through Mode (default). When in Pass-through Mode, these TV models also
allow external control via the TV’s MPI port.
Setup Checklist
Note: This document provides information specific to Commercial Mode operation. Refer to the Owner’s
Manual and/or Easy Setup Guide for information on TV installation and hardware and cable connections.
Installation
__ Unpack TV and all accessories.
__ Install batteries in the Installer Remote.
__ Install TV on VESA mount or stand.
Note: It may be advisable to make all cable
connections before installing on VESA mount
or stand, as appropriate.
Hardware Connections
__ Install any additional hardware as
appropriate to your institution, LAN, etc.
Cable Connections
__ Make all rear jack panel connections, as
appropriate.
Commercial Mode Setup
__ Complete appropriate procedures as described
in this document for Commercial Mode operation.