Installation Manual

71
206-4298
(Continued from previous page)
Select the file(s) to download, and then select UPDATE below.
Logo Image Download
Splash Image ProC.jpg
Update TV Software
LW760M_CPU_SW.epk
Update PTC Software
LW760M_PTC_SW.txt
Import Clone File
LW760M_IM.tlx
UPDATE
USB DEVICE
EXIT
Splash Image ProC .jpg Splash Image 2.jpg
TVMANAGER
USB 1: Device Name
Ez Download
Logo Image Download
Update TV Software
Update PTC Software
Import Clone File
Diagnostics
<
>
6. Use the Up/Down arrow keys to select Update TV Software or Update PTC Software, as
applicable, and press OK.
Depending on your selection, a list of either TV or PTC software files stored in the LG_DTV
folder on the USB memory device will be displayed on the screen. Above the listing of files,
you can also see the current version of TV or PTC software. The following screen sample
illustrates an Update TV Software screen.
Select the file to download, and then select UPDATE below.
Current TV Software Version: version#
filename .epk/Version: version#
filename .epk/Version: version#
filename .epk/Version: version#
UPDATE
USB DEVICE
EXIT
TVMANAGER
USB 1: Device Name
Ez Download
Logo Image Download
Update TV Software
Update PTC Software
Import Clone File
Diagnostics
7. Use the arrow keys to select/highlight the update le to download, and then press OK.
8. When you are ready to download the update, select UPDATE on the screen, and then press
OK on the Installer Remote.
Software update progress will be displayed on the screen. Do NOT remove the USB device until
the software update is complete. When the software update is complete, an UPDATE COMPLETE
pop-up banner will briey be displayed at the bottom of the screen, and then, the TV will reboot.
Reference: Updating TV/PTC Software using a USB Memory Device
(Cont.)