Installation Manual

73
206-4298
(Continued from previous page)
Select the file(s) to download, and then select UPDATE below.
Logo Image Download
Splash Image ProC.jpg
Update TV Software
LW760M_CPU_SW.epk
Update PTC Software
LW760M_PTC_SW.txt
Import Clone File
LW760M_IM.tlx
UPDATE
USB DEVICE
EXIT
Splash Image ProC .jpg Splash Image 2.jpg
TVMANAGER
USB 1: Device Name
Ez Download
Logo Image Download
Update TV Software
Update PTC Software
Import Clone File
Diagnostics
<
>
6. Use the Up/Down arrow keys to select Logo Image Download, and then press OK.
Select the file to download, and then select UPDATE below.
UPDATE
USB DEVICE
EXIT
TVMANAGER
USB 1: Device Name
Ez Download
Logo Image Download
Update TV Software
Update PTC Software
Import Clone File
Diagnostics
<
>
Image 1.jpg Image 2.jpg Image 3.jpg
7. Use the arrow keys to select/highlight the image le to download, and then press OK.
8. When you are ready to download the image le, select UPDATE on the screen, and then press
OK on the Installer Remote.
Logo image update progress will be displayed on the screen. Do NOT remove the USB device
until the splash screen image update is complete. When the image update is complete, a DOWN-
LOAD COMPLETE pop-up banner will briey be displayed at the bottom of the screen, and then,
the TV will reboot. During the reboot, you should see the new splash screen.
Reference: Downloading a Splash Screen Image using a USB Memory
Device (Cont.)