Installation Manual

8
206-4298
Commercial Mode Overview (Cont.)
FTG Mode Features
FTG Mode provides the following features:
• Logical or physical tuning of physical RF channels and Aux inputs.
• Logical tuning of IP channels.
• Mapping of RF channels with minor (program) numbers up to 999.
• FTG Channel Map of up to 600 channels.
• Start Channel set for RF, Aux input, or IP delivered content.
• Pro:Centric data delivery over RF or IP.
• TV Zoning and Wi-Fi Zoning options for location-specic conguration.
LG’s FTG File Manager PC software enables you to create an FTG Conguration (.tlx) le, which may be
used to congure the CPU for FTG Mode. FTG File Manager utilities enable you to create/edit an FTG
Channel Map and congure Installer Menu settings. You can also create a Clone (.tlx) le from a Master TV
Setup that may be used to congure the CPU for FTG Mode.
In this mode, the TV’s CPU must be congured with an FTG Channel Map and FTG Installer Menu settings
using one of the following processes:
• Local: Congure an individual LW760M TV via its USB port using a USB memory device / “.tlx” le. The
le may be either a Clone le (see “Cloning Procedures” on pages 50 to 55) or an FTG Conguration le
(see “FTG File Manager Utilities Overview” on pages 56 to 61).
• Remote: Congure all LW760M TVs at the site using a Pro:Centric server head end device (Example:
PCS200S). Refer to the Pro:Centric Server Admin Client User Guide for further information.
While the TV is in FTG Mode:
• Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu
items will be read-only.
• Any FTG conguration changes must be made using a “.tlx” le (typically edited in the FTG File Manager).
The FTG File Manager’s FTG Channel Map Conguration and FTG Installer Menu Conguration Utilities
enable you to make changes, respectively, to the FTG Channel Map and FTG Installer Menu settings as
necessary. See information on local conguration in this document or refer to documentation for the server
for information on remote management.
• If it becomes necessary to restore the TV to Pass-through Mode, there are several options that will enable
you to do so. Refer to Reference section, “Restoring Factory Defaults on the TV(s),” for further information.
Pages 56 to 61 provide overviews of the utilities that comprise the FTG File Manager. Refer to the Free-
To-Guest (FTG) File Manager User Guide for further information on the FTG File Manager.
Remote Management in FTG Mode
When the TV is configured for FTG Mode, remote management of the FTG Channel Map and FTG
Installer Menu settings is provided by a Pro:Centric server, via a Clone/Conguration (.tlx) file loaded
on the Pro:Centric server Admin Client. Refer to the Pro:Centric Server Admin Client User Guide for
further information.