Installation Manual
86
206-4298
Reference: Using Media Share Features (Cont.)
(Continued from previous page)
• If the Pro:Centric application is not loaded, press PORTAL on the Installer Remote, and use the Left/
Right arrow keys to select SmartShare from the TV’s Smart Launcher.
• If the Pro:Centric application is loaded, use the Up/Down arrow keys to select SmartShare from the
General Menu.
Note: Depending on the remote control being used (in any mode), you may also access the Smart
Launcher via the SMART button.
7. In the Smart Share screen, select the desired Smart Share device, and then select the desired media
category to view les.
Screen Share (Miracast / WiDi)
The following steps describe how to access and use the Miracast / WiDi features.
1. Turn ON the TV, and then use one of the following methods to access the Screen Share application,
depending on the current conguration of the TV:
• If the Pro:Centric application is not loaded, press PORTAL on the Installer Remote, and use the Left/
Right arrow keys to select Screen Share from the TV’s Smart Launcher.
• If the Pro:Centric application is loaded, press MENU on the Installer Remote to display the Function
Menu, use the Up/Down arrows to select/highlight the General menu icon, and then press OK. In the
General Menu, use the Up/Down arrow keys to select Input. In the Input Menu, use the Up/Down
arrow keys to select Screen Share.
Note: Depending on the remote control being used (in any mode), you may also access the Smart
Launcher via the SMART button.
Note: If Screen Share is currently not available in the Smart Launcher or in the Input Menu (the latter
applicable to FTG Mode only), you may need to turn OFF another Media Share feature in order to use
Screen Share. For example, access the General Menu and make sure that SoftAP is turned OFF. See
also note on page 84 regarding simultaneous use of Media Share features.
2. Follow the on-screen instructions to initiate the Miracast / WiDi connection from your Miracast / WiDi
device. Note that you may be prompted to enter a PIN number that appears on the TV screen into your
Miracast / WiDi connection window to complete the connection.
Once the connection is established, the TV display may be used as a second screen for the Miracast /
WiDi device.
Bluetooth Sound Sync
The following steps describe how to access and use the Bluetooth Sound Sync feature.
Note: Bluetooth Sound Sync is only accessible from the TV’s Smart Launcher. If the TV is not in
Pass-through Mode, you will need a remote with a SMART button in order to display the Smart Launcher.
1. Turn ON the TV, and then use one of the following methods to display the TV’s Smart Launcher,
depending on the current conguration of the TV:
(Continued on next page)