Installation Manual

87
206-4298
(Continued from previous page)
• If the Pro:Centric application is not loaded, press PORTAL on the Installer Remote.
• If the Pro:Centric application is loaded, press SMART on the Installer Remote (see note above
regarding remote with SMART button).
2. Use the Left/Right arrow keys on the Installer Remote to select Bluetooth Sound Sync, and then
press OK.
3. Follow the on-screen instructions to initiate and conrm pairing between your device and the TV.
Once Bluetooth pairing is successful, audio from the device may be heard through the TV’s speakers.
(Make sure the TV volume is at the appropriate level.)
DIAL
The following steps describe how to access and use DIAL. Remember that the device used MUST be
connected to the same network as the TV.
Note: DIAL may only be used with device applications for which a TV-compatible application (for
example, YouTube) has been created/selected for inclusion in the Pre-loaded Apps Menu (see “Pre-loaded
Applications” on page 69).
Note: The applications that may be used in conjunction with DIAL are only accessible from the TV’s
Smart Launcher. If the TV is not in Pass-through Mode, you will need a remote with a SMART button in
order to display the Smart Launcher.
1. Turn ON the TV, and then use one of the following methods to display the TV’s Smart Launcher,
depending on the current conguration of the TV:
• If the Pro:Centric application is not loaded, press PORTAL on the Installer Remote.
• If the Pro:Centric application is loaded, press SMART on the Installer Remote (see note above
regarding remote with SMART button).
2. Use the Left/Right arrow keys on the Installer Remote to select the desired application, and then press
OK.
3. On your device, launch the same application, and use the appropriate options (typically available via
Settings) to initiate a connection/pairing with the TV. You may also need to access the Settings options
from the application on the TV to complete the pairing operation. Follow the on-screen instructions.
Once the connection/pairing is successful, you will be able to view media from the application on the TV.
SoftAP
The following steps describe how to access and use the SoftAP feature.
1. Turn ON the TV, and press MENU on the Installer Remote to display the TV menus (either the setup
menus or the Function Menu depending on whether the TV is or is not in Pass-through Mode).
2. Use the Up/Down arrow keys to select/highlight the General menu icon, and then press OK.
3. In the General Menu, use the Up/Down arrow keys to select SoftAP, and then press OK.
Note: If SoftAP is currently grayed out, make sure a wired LAN connection has been established.
Reference: Using Media Share Features (Cont.)
(Continued on next page)