Installation Manual

89
206-4298
PILLOW
SPEAKER
ANTENNA/
CABLE IN
SPEAKER OUT
LINE OUT
SERVICE
ONLY
OPTICAL
AUDIO OUT
MPI
RESET
UPDATE
UPDATE
LAN
UPDATE
Restricted to software updates.
RESET
Initiates a hardware reset and turns the TV OFF.
MPI
When the TV is in Pass-through Mode, the MPI
function enables an external MPI control device
(i.e., VOD/PPV STB, etc.) to control the TV.
AV IN
(3.5 mm jack) Connect to audio/video
output from external device (use A/V
adapter cable provided with TV).
SPEAKER OUT / LINE OUT
( 3.5 mm jack) Connect external audio (xed speaker,
variable speaker, or xed line level [amplier])
equipment. See Reference section, “External Stereo
Speaker Specifications,” for further information.
ANTENNA/CABLE IN
Connect to Antenna/
CATV.
Reference: LW760M Rear and Side Jack Panels
PILLOW SPEAKER
Connect pillow speaker here.
..........
USB IN 1
IN 2
AV IN
USB IN 2
..........
IN 1
(ARC)
Side Jack Panel
USB IN 1 & 2
Insert USB memory device for
software updates, cloning purposes,
FTG Mode configuration, picture/
music entertainment, etc., as
applicable.
HDMI IN 1 & 2
Connection for HDMI output
from external device.
SERVICE ONLY
Restricted to service updates.
OPTICAL DIGITAL AUDIO OUT
Use for amps and home theater systems. Note:
When the TV is OFF, this port is not enabled.
LAN
Use for video IP and/or network connections.